Bow Drill Tips?
-
Bravo

-
Bravo

+100!
Nice!That's us mobile

-
I've had success with cedar on cedar and yucca stalk on cedar. If you use synthetic cordage with stretch, you want a bow that doesn't flex...with natural materials you want the bow to flex a bit. I prefer a straighter bow...think violin bow as opposed to archery bow. It's easier to drive back and forth without fighting the weight of the bow sticking out the side. If I were looking for a branch to make a bow, I'd look for more of a comma shape rather than a D shape.
The bows I made are pretty short, only about 18" long overall..I started out with longer, but these are working for me and easier to pack. The cords are adjustable longer for Egyptian style, but I prefer the single wind. There's enough paracord for a second stringing in case of breakage. The bearing block is oak with a bottle cap embedded into it. I've actually replaced it a couple times as a hole will eventually wear through. I smear it with a bit a beeswax and there is a reservoir hole drilled in the side of the block to store extra wax.
Spindles start out about 3/4" square...corners carved off into a rough hex. This gives the cord better grip initially. Eventually the pressure of the cord compresses and rounds out the spindle.

-
Nice set man!
That's us mobile
-
@ducttapetech said:
Nice set man!That's us mobile
Yes very nice. Great info as well. I think I'll give the straight bow a try

-
Great stuff Dave.

-
Nice set man!
That's us mobile
Yes very nice. Great info as well. I think I'll give the straight bow a try

I am thinking the samething.
That's us mobile
-
Nice set man!
That's us mobile
Yes very nice. Great info as well. I think I'll give the straight bow a try

I am thinking the samething.
That's us mobile
Great info, but too late, I cut a curved one already.

-
I wasn't happy with just posting a short video as my proof, so I gave it another shot today.
Here's the set I was successful with today. The wood used was grey alder, a soft wood found all over Sweden. (Next to my Silvertech Swisschamp, I used the saw to make two cuts towards the center of the hole, the cap lifter to pry off the piece of wood to complete the notch and the file to put the finishing touches on the spindle)
It took me 2½ hours to get a flame. Before that flame, I'd gotten 3 coals! But my tinder bundle wasn't good enough. Ughhhh. The winning combination was tightly packed super dry lichen in the middle, with thin strips of birch bark mixed into that, surrounded by grass. I had to make a new spindle and bearing block because I wore out the previous pieces. I managed to do this without cheating with the shot glass, so I'm pretty dang happy right now!
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)

-
"Yes! Smurfing finally."

Great job WiseDuck.

-
Awesome!
I saw someone use a big log to be the bearing block so it's weight did the work of the downward force. I always wondered if it would acruelly work better or not.
-
Maybe if the friction between the spindle and cordage is high enough. With this flimsy nylon cord (taken out of a Bear Grylls Basic Survival kit, which I then re-stocked with 550 paracord) I often pressed too hard with the bearing block and the cord slipped. So it was a bit of a balancing act at times. But it got the job done.
-
Freaking AWESOME. You have got me wanting to try this very soon. Congrats again.
-
Egyptian wrap

-
Sweet setup. Can these tools be used for another purpose? What aisle at Cabela's would have then been down 60,000 years ago?
Sent from my XT1563 using Tapatalk
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

