And so it begins.... (My adventures into Alox!)
-
Can you mill a notch in the one end? Then cut half of the flint so it slips in on the one side so you only have to worry about the other end?
JR
Sak_________________---- ___====flint====. Kinda like that?
Then maybe put a magnet on the other?
-
Couldn't you just mill another slot like the pen slot?
-
@HarleyXJGuy said:
Couldn't you just mill another slot like the pen slot?But what would hold it in? As it got thinner it would just fall out. Also it would require me to have double the thickness of Ti scales, which ups the cost, thickness and weight.
Ive got a solution now, but it requires new scales to be cut.
-
Ive been selling 3 or 4 of these a week pretty steadily. For sure the most popular 3 layer. Come to think of it, I rarely build wider than 4+ layer ones.




-

Did you get your Mill up and running ? Lets see a video

-
Did you get your Mill up and running ? Lets see a video

I had to earn some money to pay bills so the last week was all regular old by hand work to get out 8 SAKs. Im back to setup of the mill now. I did the flood coolant plumbing and IM building the enclosure tonight and tomorrow, then I'll post another video.
-

Did you get your Mill up and running ? Lets see a video

I had to earn some money to pay bills so the last week was all regular old by hand work to get out 8 SAKs. Im back to setup of the mill now. I did the flood coolant plumbing and IM building the enclosure tonight and tomorrow, then I'll post another video.

-
@HarleyXJGuy said:
Pictures not working for me.Sad panda.
I think I fixed them
-
@Syph007 said:
Here is what Im currently trying. A slot milled into the back scale near center to fit it. But how to hold it in is the problem. It sits just about flush. Im thinking a small bit of a super thin Ti to act as a retaining spring. Im just trying to think of the easiest way to produce it and not over complicate it. And I dont want it sticking up to high or it would be annoying when you hold the SAK for normal use.Could you look to Mora Light my Fire for some inspiration?
Twist'n lock.
Use it on a tool layer, scale tool or whatever your mad lab conjures.
Sent from my XT1563 using Tapatalk
-
Chugging right along today, I finished up a compact tinker. Mostly the standard finish except nickel silver on the tweezer instead of brass.




-
Those titanium liners must make the SAK a little lighter than brass - love the look of the brass though. Always a fan of the in-line Phillips. Pretty.
-
-
What about making the slot for the tweezers longer and putting the firesteel in first and have it held in by the tweezers?
-
@HarleyXJGuy said:
What about making the slot for the tweezers longer and putting the firesteel in first and have it held in by the tweezers?That Might work, but Id only be able to fit the 3/32 size in that way. After trying both these small sizes I think the 1/8 inch size is realistically the smallest Id want to bother with fitting. Ive got a solution I tested that works, it locked it into the scale, but I need to have new ones cut now to have it nicer looking.
-
How thick are your Ti scales and the diameter of the rod (the ferrocerium that is).
On another note, if instead of Ti you made it all with Al but with space for T&T and pen, what would be the difference between Ti and Al?
-
Working on my mill setup again right now... slowly making some progress.
-
And a bit more... everything keeps taking longer than I think it should. :D
-
Best to take your time and get it right from the start.
10 years from now you will not even care how long it took but be glad you had a good running machine.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login