What did you use your Sak on today?
-
Craftsman--the wood saw to cut an empty large plastic bucket (used to hold about 100 pounds of mineral) in half in order to use the bottom half to hold some livestock mineral in a 55 gallon barrel. . Really a job that the Soldier '08 would have been quicker, but it did the job great, surprisingly, even though it took awhile and quite a bit of effort. The Vic saw is a mark above many others when it comes to cutting.
-
Used the blade on my Trekker to shave some of the thorns off a bunch of tree branches so I had something to grab and drag them out to the curb.
@cody6268 said:
Craftsman--the wood saw to cut an empty large plastic bucket (used to hold about 100 pounds of mineral) in half in order to use the bottom half to hold some livestock mineral in a 55 gallon barrel. . Really a job that the Soldier '08 would have been quicker, but it did the job great, surprisingly, even though it took awhile and quite a bit of effort. The Vic saw is a mark above many others when it comes to cutting.You can say that again. They're super aggressive.
-
I mostly used the Craftsman's saw for pruning, and I used the Bear MGC Super Bear Jaws Gardener (since, technically, at the time the tool was made, it was a Victorinox-owned company) and it's beefy shear head to cut back a large thorny vine.
I also built this a couple hours ago using the Craftsman's scissors. I'd found this Y-shaped stick would be perfect for a slingshot, so I picked it up a couple months ago. I had the ruptured bike inner-tube (came from a cheap bike my grandfather purchased, which I accidentally overinflated, and thus, it ruptured!) since last summer. I just gathered the materials and built it. Used the scissors to cut just the right width of inner tube. I'd say the range is about 50-75 feet, depending on the shape and size of the gravel I shot out of it. Not bad for something I threw together in 5 minutes.

-
Those slingshots can be the funnest thing going Cody! Can't beat a weapon you put together with your own hands!

-
got to use the inline phillips to fix the mail box. replaced a rusted out rivet with a stainless steel bolt. the bolt will last longer than the box. have to keep that in shape for at least a couple weeks as some SAKs are still in the deliver pipeline.
-
@ICanFixThat said:
got to use the inline phillips to fix the mail box. replaced a rusted out rivet with a stainless steel bolt. the bolt will last longer than the box. have to keep that in shape for at least a couple weeks as some SAKs are still in the deliver pipeline.
When I finally stopped carrying a SwissChamp I switched to an Explorer Plus, because I wanted to keep the excellent inline Phillips. Nowadays carrying mostly 2-3 layers I use the 2D can opener driver a lot, but it's not the same. The nice thing about the Explorer is that it has both!

-
I used the Swisstool's awl and phillips to put up a curtain rod in the bathroom.
Sent from my SM-G920R4 using Tapatalk
-
Helped my daughter make a dinosaur model with the Pioneer X
-
Processed some fat wood. Had to use rubbing alcohol to get all the resin off the saw.

-
Swisstool X scissors and file vs. my wife's toenails. They put up a good fight, but Swiss engineering prevailed.
-
Looking at a dead lizard with my new Explorer.

-
Use the Deluxe Tinker to open my wall drill. Don't know why it's suddenly jammed. I think something was misplaced inside.
And now it works fine but I still didn't find the cause.

Sent from my SM-J500G using Tapatalk
-
I've actually been using my SAK a bit more for food prep lately when I'm out and about. Never really done this with a knife too often, more work utility (dirty). But the big blade on the SAK is perfect and having a little baby I'm cutting up lots of fruit now.
How can I keep the knife well maintained? I want to use it for food prep, but I don't want to ruin it and gunk it up. Just a wipe down and oiling every so often?
Thanks
-
The MechaRogue's awl was used to start the screw holes while putting up some curtain rods today.
Sent from my SM-G920R4 using Tapatalk
-
Nice pic Classicrock! That's what a Tinker is all about!

-
@kaput said:
I've actually been using my SAK a bit more for food prep lately when I'm out and about. Never really done this with a knife too often, more work utility (dirty). But the big blade on the SAK is perfect and having a little baby I'm cutting up lots of fruit now.How can I keep the knife well maintained? I want to use it for food prep, but I don't want to ruin it and gunk it up. Just a wipe down and oiling every so often?
Thanks
Victorinox care tips: https://www.swissarmy.com/us/en/Service/Product-Support/Swiss-Army-Knives/Swiss-Army-Knives-Care-Tips/cms/service-swiss-army-knife-care-tips
Edit: Vic doesn't allow deep linking.

-
Had to use "The Beast", cause some dipstick pulled the string on his shorts and the other side got pulled to far, so, I had to use the hook and fish it threw to hook it and pull it back!
JR
-
@MadPlumbarian said:
Had to use "The Beast", cause some dipstick pulled the string on his shorts and the other side got pulled to far, so, I had to use the hook and fish it threw to hook it and pull it back!
JRGood hook use

Sent from my SM-G920R4 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




