SAK modding guides, all in one place.
-
-
@enki_ck said:
The top link isn't showing up as a link for me.

Please explain, what link? I just checked all the link in the OP and they all work for me.

I'm on my phone right now and the first thread title isn't showing up as a link. I just checked on my computer though and it is working there. I guess it's a tapatalk thing.
-
@enki_ck said:
The top link isn't showing up as a link for me.

Please explain, what link? I just checked all the link in the OP and they all work for me.

I'm on my phone right now and the first thread title isn't showing up as a link. I just checked on my computer though and it is working there. I guess it's a tapatalk thing.
OK, that was weird.

Yes, the first link wasn't working in tapatalk for me either. I tried moving it, adding text to the top, nothing, even though it had the same formatting as the rest of the links. I now removed the link, added the same link with the same text and now it seems to be working.

-
@enki_ck said:
@enki_ck said:
The top link isn't showing up as a link for me.

Please explain, what link? I just checked all the link in the OP and they all work for me.

I'm on my phone right now and the first thread title isn't showing up as a link. I just checked on my computer though and it is working there. I guess it's a tapatalk thing.
OK, that was weird.

Yes, the first link wasn't working in tapatalk for me either. I tried moving it, adding text to the top, nothing, even though it had the same formatting as the rest of the links. I now removed the link, added the same link with the same text and now it seems to be working.

Yes it seems to be working. Thanks enki_ck!
-
Is there a link or thread that explains compatibility issues, layer requirements such as opener layers? I'd like to know the whole skinny (for 93mm alox in particular) and I bet I'm neither the only nor the first to want or need this edification.
That would help initiates such as myself whether interested in doing it ourself or having it done. It's probably been explained a meelion times, why not post a link or explain it here. Then next time it comes up, just point them to it.
-
Hello
somme one tell my where I can by a sleeve and screw for S.A.K Mod
please
thanks -
Thanks to all involved in this thread. It is a wonderful resource. I was able to completely restore my time weary Victorinox Champion with the information shared here.
-
-
-
aww yeah!
-
Question about pin stock
Does anyone know a good place to get it 
I am looking at needing 2.5 mm and 2.2 mm

If this has been answered lately I surely would have seen it but things do slip by me sometimes

-
@Poncho65 said:
Question about pin stock
Does anyone know a good place to get it 
I am looking at needing 2.5 mm and 2.2 mm

If this has been answered lately I surely would have seen it but things do slip by me sometimes

I believe Al (50ft-Trad) had a line on some a while ago, but I don't know if that's still the case or if it's a practical answer.
-
@Poncho65 said:
Question about pin stock
Does anyone know a good place to get it 
I am looking at needing 2.5 mm and 2.2 mm

If this has been answered lately I surely would have seen it but things do slip by me sometimes

They dont make 2.2 in north america but K&S do make 2.5mm and you can find that on ebay/amazon. If its just for a couple of mods I would recommend buying 3/32 size for the 2.2mm. It is 2.38 mm and its not too hard to sand that down with a cordless drill to get it to 2.2

-
Thanks for the answers guys
of course you know what we say about stickies
I was caught not reading them 
-
I would like some help/advice with my first modding plans.
I want to make a "maxed out" flight version of the minichamp (basically remove the two blades and reshuffle the remaining components accordingly).
I also want to figure out a way to take a cybertool 34 and add the 58mm combo tool (bottle opener/phillips head piece) and either the 74mm or 58mm orange peeler to it, and likely remove the scissors as well.
I think it would be neat to take a 91mm small blade and cram it into a minichamp as well, also removing the two native blades in the process. Is that feasible.
TIA for any/all advice
EDIT: Instead of a maxed out flight minichamp, I would like to take a jetsetter 3 (combo-phillips + scissors, t&t), and replace the toothpick scale with a pen scale, and the scissors with the 58mm orange peeler + ruler/sd tip (any recommendations how to turn the other side of that into a file like they should have done from day 1?). Is there any way to modify a default 58mm scale to hold both the toothpick and the tweezers? parallel diagonal is what I'm thinking, but I bet those rivets would get in the way.
-
@Tjzm1993 said:
I would like some help/advice with my first modding plans.I want to make a "maxed out" flight version of the minichamp (basically remove the two blades and reshuffle the remaining components accordingly).
I also want to figure out a way to take a cybertool 34 and add the 58mm combo tool (bottle opener/phillips head piece) and either the 74mm or 58mm orange peeler to it, and likely remove the scissors as well.
I think it would be neat to take a 91mm small blade and cram it into a minichamp as well, also removing the two native blades in the process. Is that feasible.
TIA for any/all advice
EDIT: Instead of a maxed out flight minichamp, I would like to take a jetsetter 3 (combo-phillips + scissors, t&t), and replace the toothpick scale with a pen scale, and the scissors with the 58mm orange peeler + ruler/sd tip (any recommendations how to turn the other side of that into a file like they should have done from day 1?). Is there any way to modify a default 58mm scale to hold both the toothpick and the tweezers? parallel diagonal is what I'm thinking, but I bet those rivets would get in the way.
I can't answer many of your questions but I do know that Syph007 was working on a solution for bringing the T&T together with a light and pen in the 58mm. It's not what you were asking for but it does allow you to bring all the 58mm scale tools. See link
As for the ruler/SD I would recommend going from the other direction, adding a ruler to a file with SD-tip should be much easier (some sort of etching preferably).
-
I'm trying to replace the main blade on a Angler (91mm), I'm looking for screw pivots to replace the rivets once I remove them.
Do these only work with the Alox models, and if they would work with the Angler how do I ensure that their long enough (they don't list the measurement units on the site).
http://www.knifekits.com/vcom/product_info.php?cPath=60_83&products_id=471Alternatively, I'll just use the regular pins in the guides.
-
@Quizerno said:
I'm trying to replace the main blade on a Angler (91mm), I'm looking for screw pivots to replace the rivets once I remove them.Do these only work with the Alox models, and if they would work with the Angler how do I ensure that their long enough (they don't list the measurement units on the site).
http://www.knifekits.com/vcom/product_info.php?cPath=60_83&products_id=471Alternatively, I'll just use the regular pins in the guides.
You will find that the pins on the 91 mm SAKs are a mix of 2.5 and 2.2 mm, quite a bit smaller than 1/8". Unless you have the tools to drill the holes pinning will be the way to go.
-
Does anyone know how to coat the victorinox's blade black, I've tried the FeCl3 solution as a test and it didn't work. Sorry for my bad english

-
The guides listed in this sticky have been inspirational and will hopefully be invaluable.
...but, some of them are rather out of date what with the lack of photos coming through from Photobucket. Maybe it's time for an update: either re-adding the original photos or advising in the original post which guides now lack photos.
I'm sure the ones that no longer have photos will still be useful though. Well, I hope so! Either way, I'm grateful for their existence.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login