What did you just get?
-
I received the Bear Jaws multi today. Not sure of the model, but it's the 4" version. It feels well built and solid. The lock release tabs are a little weird, but work well for their purpose. They're just sticking out though, and can catch on things if you pocket carry. In pliers mode they act as sort of a spring action mechanism, but if you repeatedly squeeze the pliers open and closed, the tabs pull out the file and phillips driver.



It's not very tool heavy, which isn't helped by having two blades, one of which isn't really necessary. The file is warped (not sure if that's the norm or not), and is loose when locked.




Sent from my SM-G920R4 using Tapatalk
-
My latest tool acquisition was Topeak Ratchet Rocket
In the (apparently waterproof) case are the ratchet, bit kit /w chain tool and two small tire levers:

Closer look at the ratchet and the bit storage:

Pairing this up with my Skeletool /w Bit Kit and Bit Extender, excellent bike tool combo.

-
A couple of Opinel Brun & Noir.
Details here:
http://www.boutique-opinel-musee.com/couteaux-de-poche/classiques/luxe/n08-brunnoirYes, a couple.
Spoiler:
One is going to be a shelf queen.
The other is a backup, in case anything happens to the first...
Sweet dude

I know why you wrote that, so...
Spoiler:
Here goes...
:D :D :D :D
-
Picked up the Octane and Skeletool on clearance. I'm going to try to edc a multi without scissors, though I doubt that will last.

-
I bought these at a boating/outdoor store called West Marine. Sometimes they have great sales/clearance but they also have iffy online inventory management. Home Depot and Walmart are also good for really low prices a few times a year.
-
@gregpost said:
I bought these at a boating/outdoor store called West Marine. Sometimes they have great sales/clearance but they also have iffy online inventory management. Home Depot and Walmart are also good for really low prices a few times a year.Best review for WM i have ever read!!
Their customer service is pretty good. They were selling the Rebar/Micra combos for 19.99 and customer service not only found them for me, but made sure the stores that had them could ship them to me via phone payment.
They have 3 local stores, i dont buy anything from them unless its a very very specific part, or its a last minute emergency.
-
They also sell the best epoxy systems I can get locally, way better than what you find in the big hardware stores. I agree their customer service is very good on the phone or in-store. They just seem to have a few online bugs they need to work out.
-
Got a sideclip on Sunday it's a nice little mt also a juice kf4 that's lovely but a bit too pretty for me to use
-
Received my Irwin Vise-grip multi-plier 5CR. Completes the set.
-
Today, I visited the local surplus store again, and went through all the dozen or so knives behind the counter. Each knife the lady handed me was either bargain bin '80s and '90s China or Pakistan crap--except for these two. After the first couple, I found a beat up and probably inexpensive when new knife marked simply "USA". Then, after about half a dozen more crap, I came across the other, marked "CRAFTSMAN 95235 USA"
I paid $6 for the small knife marked USA, and $12 for the Craftsman. I cleaned the Craftsman and slipped it into my pocket. The blade needed to be straightened out (edge was chipped in a few places) and sharpened. Small knife's gonna need a lot of work--rust everywhere! Craftsman was screwed up by the original owner--who sharpened the main blade with a grinder plus rusty backsprings and a few rust spots that I'll fix later. The Craftsman I'm almost certain was made by Camillus in the '70s for Sears. "USA" could be a number of makers, and was likely from the '50s or '60s. I feel I overpaid for both (though a quick Ebay search reveals I got an OK deal on the Craftsman, as there's one in even worse shape than mine for the same price I paid) --but was glad to rescue these two well made knives.


-
Got my LM Juice S2 today. Almost love it. Forgot to mention, that I chose the old style.
-
Couple of tiny, keychain rescue knifes... Pioneer X for size


-
@Monrogue said:
I received the Bear Jaws multi today. Not sure of the model, but it's the 4" version. It feels well built and solid. The lock release tabs are a little weird, but work well for their purpose. They're just sticking out though, and can catch on things if you pocket carry. In pliers mode they act as sort of a spring action mechanism, but if you repeatedly squeeze the pliers open and closed, the tabs pull out the file and phillips driver.



It's not very tool heavy, which isn't helped by having two blades, one of which isn't really necessary. The file is warped (not sure if that's the norm or not), and is loose when locked.




Sent from my SM-G920R4 using Tapatalk
On mine, it's the exact opposite. Many of the tools were tight. Many were also not finished at all. The partially serrated blade opened too far, and the can opener can barely be opened. Pliers are extremely tight where the handles fold. Phillips won't open all the way. They want $8 for return shipping (only paid $13 for the tool new), so for that money I'll buy a set of safety Torx bits, dissassemble everything. and sand down the pivots, and remove the excess metal on the others.
-
Custom Leathercraft Pliers belt holster for my Proto 267 lineman's pliers. There were better (and more expensive) options I could find online, but for $5 and being able to find it at the local Tractor Supply--I can't complain.

-
I received the Bear Jaws multi today. Not sure of the model, but it's the 4" version. It feels well built and solid. The lock release tabs are a little weird, but work well for their purpose. They're just sticking out though, and can catch on things if you pocket carry. In pliers mode they act as sort of a spring action mechanism, but if you repeatedly squeeze the pliers open and closed, the tabs pull out the file and phillips driver.



It's not very tool heavy, which isn't helped by having two blades, one of which isn't really necessary. The file is warped (not sure if that's the norm or not), and is loose when locked.




Sent from my SM-G920R4 using Tapatalk
On mine, it's the exact opposite. Many of the tools were tight. Many were also not finished at all. The partially serrated blade opened too far, and the can opener can barely be opened. Pliers are extremely tight where the handles fold. Phillips won't open all the way. They want $8 for return shipping (only paid $13 for the tool new), so for that money I'll buy a set of safety Torx bits, dissassemble everything. and sand down the pivots, and remove the excess metal on the others.
Your blade sounds like my file by opening too far. Is yours warped at all? Mine does close tightly as well when folding the handles back in from plier mode.
Sent from my SM-G920R4 using Tapatalk
-
@cody6268 said:
Custom Leathercraft Pliers belt holster for my Proto 267 lineman's pliers. There were better (and more expensive) options I could find online, but for $5 and being able to find it at the local Tractor Supply--I can't complain.And it will do the job... Like the look of it, looks solid what do you want more
... molle webbing
? -
Another Farmer followed me home :D

-
a BO MP600 from a deal with Kampfer.

-
I received the Bear Jaws multi today. Not sure of the model, but it's the 4" version. It feels well built and solid. The lock release tabs are a little weird, but work well for their purpose. They're just sticking out though, and can catch on things if you pocket carry. In pliers mode they act as sort of a spring action mechanism, but if you repeatedly squeeze the pliers open and closed, the tabs pull out the file and phillips driver.



It's not very tool heavy, which isn't helped by having two blades, one of which isn't really necessary. The file is warped (not sure if that's the norm or not), and is loose when locked.




Sent from my SM-G920R4 using Tapatalk
On mine, it's the exact opposite. Many of the tools were tight. Many were also not finished at all. The partially serrated blade opened too far, and the can opener can barely be opened. Pliers are extremely tight where the handles fold. Phillips won't open all the way. They want $8 for return shipping (only paid $13 for the tool new), so for that money I'll buy a set of safety Torx bits, dissassemble everything. and sand down the pivots, and remove the excess metal on the others.
Your blade sounds like my file by opening too far. Is yours warped at all? Mine does close tightly as well when folding the handles back in from plier mode.
Sent from my SM-G920R4 using Tapatalk
It is warped--slightly to the left.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login