The time has come
-
I´ll check my stash.
I once did the other way round and added parts from a MP 600 to teh Diesel - Dubbed it Turbodiesel...
<a href="http://s4.photobucket.com/user/mattschwarz/media/MTO Stuff/mods and projects/turbodiesel_10_zpsirxmmmzf.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i4.photobucket.com/albums/y102/mattschwarz/MTO Stuff/mods and projects/turbodiesel_10_zpsirxmmmzf.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s4.photobucket.com/user/mattschwarz/media/MTO Stuff/mods and projects/turbodiesel_11_zpsqps8bnz3.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i4.photobucket.com/albums/y102/mattschwarz/MTO Stuff/mods and projects/turbodiesel_11_zpsqps8bnz3.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Nice! I can see the draw to do that, as well. The Diesel has a lot going for it. I like the lock tabs, the povot screws, the wire cutters are huge, the plier head in general is giant, and the mechanism spreads the handles a bit more than on the MP.
Let me know if you find one you can part with. Thanks for checking

-
Awarded.

-
Love that MP600D mate.
You can't go wrong with the Mp425 either. My MP400 mod (the MP475) is a little different as I had a Gerber awl kicking around that was begging to be used./post/608324

-
I've been fiddling with the MP600D (cumbersome name - D600?) since I got it put together yesterday. No real tasks. I used the blade to help break-down some boxes. The scissors have done some light paper cutting. Mostly I've just been opening and closing the various implements, getting used to deploying them in their new arrangement. Deploying the can-opener as a middle tool is awkward, but I am getting used to it.
My only issue, and I remember seeing in the past someone else having the same problem, the file and scissors are both difficult to deploy. The file is worse than the scissors, though. It's not pivot pressure, it's the extra material around the pivot-hole rubbing on the inside of the handle. The file and scissors are both right-side while looking down into the handle, closest to the screw. The left-side is where the bolt comes into the handle and causes a bit of space between the implement and the handle. It's causing enough friction that the BO is rubbed off the outside corner of the base of the file - in fact, it is shiny! I am guessing I could file a tiny bit of material off of the base of the scissors and file.
Anyways, even in spite of that, I am still really excited about the new load-out
I can't wait to put it to some real work. -
Nicely done
Now you have me wanting to mess with my Diesel....Sent from my SM-G920R4 using Tapatalk
-
I've made a little bit of a change, today. I decided to pull the Diesel blade out and put the serrated blade back in, and I swapped it's position with the file. This achieved a couple of important improvements for me:
1) With the file on the left side looking down into the tool, now it has a little breathing room between it and the side of the handle. It no longer rubs and opens as easily as all the other implements (although, after working it A LOT the past week, it must have worn enough material away that it wasn't too bad - friction FTW
).2) Eliminates a little bit of redundancy in that I can carry a folder with a high quality plain edge, and my MP has plenty of serrated edge to use on fibrous material.

Issues: the nail-nick on the file is no oriented to face the inside of the handle. But it is basically a non-issue since the file is covered with traction, so even if it had no nick - it would still be easy to grab and deploy. Also, the nail-nick IS still accessible thanks to the cut-out on the cap-lifter - it drops away just in time to reveal the nail-nick on the file.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login