It doesn't make any sense.
-
Say bye to Dave everyone. When Mike or Dunc read that he is outta here! :D
-
Before the flame war starts.... :D
I found myself not using my SwissTool and grabbing for a Wave and then a Kick just now. Not because they are better, but because I was doing more delicate work and wanted a lighter tool. I also wanted the diamond file.
-
The Core? I certainly would have a hard time buying a tool that has plastic as a major part of the mechanicals over an all-metal, rock-solid Swisstool. I'd rather compare a Swisstool to a Supertool, honestly. My ST200s are no slouch.
I understand what you mean, Dave. At first, there appear to be no defining innovations with the Swisstool over the standard Leatherman. Then you realize that the Swisstool was the first design with no clumping and outside opening tools, and that those two items make a world of difference. As far as I can tell, Leatherman still hasn't caught up to Victorinox on those fronts.
-
I should use my Swisstool to SMASH MY LEATHERMANS.
HULK SMASH! Graawr! And take pictures. Hulk take pictures too.
-
@NutSAK said:
The Core? I certainly would have a hard time buying a tool that has plastic as a major part of the mechanicals over a rock-solid Swisstool.I understand what you mean, Dave. At first, there appear to be no defining innovations with the Swisstool over the standard Leatherman. Then you realize that **the Swisstool was the first design with no clumping and outside opening tools, and that those two items make a world of difference. **
That's a fair point. I'll concede that one (I didn't know that tbh).
The plastic on the Core though, whilst more than cosmetic, doesn't weaken the tool though does it? Granted - if you dropped it in a fire it might rattle a bit afterwards - but the forces are all carried by steel.
Hmmm interesting idea for a thread there - ZYTEL v CELIDOR I know there's no plastic on the Swisstool or Spirit, but the principle's the same.

-
Honestly, if the Zytel melted, I don't think you could use the Core at all. I don't own one, but from the pictures it looks like there's an awfully thick piece of it around the pivot between the tools and the handles.
Look at it this way. Is there ever any benefit to using plastic in a tool over metal? Other than to reduce weight and cost, that is...
-
@DaveK said:
Hmmm interesting idea for a thread there - ZYTEL v CELIDOR I know there's no plastic on the Swisstool or Spirit, but the principle's the same.
I don't think the principle is the same at all. Cellidor is used for ergonomic and aesthetic reasons only. A SAK works perfectly well without scales. Honestly, I'm not sure why LM decided to use Zytel in the mechanicals of the Core at all. Is there some benefit other than to reduce weight and cost?
-
@NutSAK said:
Look at it this way. Is there ever any benefit to using plastic in a tool over metal? Other than to reduce weight and cost, that is...It can be comfier, doesn't feel as cold in cold weather, doesn't rust, needs very little TLC, saying all that i agree plastic isn't the greatest thing to be put in a multitool. :)
-
Look at it this way. Is there ever any benefit to using plastic in a tool over metal? Other than to reduce weight and cost, that is...
It can be comfier, doesn't feel as cold in cold weather, doesn't rust, needs very little TLC, saying all that i agree plastic isn't the greatest thing to be put in a multitool. :)
OK, but in the Core, the plastic doesn't touch your skin--it's on the inside of the tool only. So, there is no benefit of comfort or temperature. I can't say that my Swisstools have needed any TLC either. Some of my Leathermans have, though. :P :D
-
@NutSAK said:
OK, but in the Core, the plastic doesn't touch your skin--it's on the inside of the tool only. So, there is no benefit of comfort or temperature. I can't say that my Swisstools have needed any TLC either. Some of my Leathermans have, though. :P :DI was just on about tools in general, but yes in the case of the Core it does seem a bit odd :-\ :)
-
Plastic inserts can also trap moisture behind them, leading to increased rust. At least, that seems to be the case with my Kick...
-
-
Look at it this way. Is there ever any benefit to using plastic in a tool over metal? Other than to reduce weight and cost, that is...
It can be comfier, doesn't feel as cold in cold weather, doesn't rust, needs very little TLC, saying all that i agree plastic isn't the greatest thing to be put in a multitool. :)
OK, but in the Core, the plastic doesn't touch your skin--it's on the inside of the tool only. So, there is no benefit of comfort or temperature. I can't say that my Swisstools have needed any TLC either. Some of my Leathermans have, though. :P :D
I just recently rescued my Swiss Tool from the pocket of the car door (it was there about a year) the only rust was found between the awl and the phillips head. I have owned Kicks that rusted in my house sitting on a shelf. :o
-
Look at it this way. Is there ever any benefit to using plastic in a tool over metal? Other than to reduce weight and cost, that is...
It can be comfier, doesn't feel as cold in cold weather, doesn't rust, needs very little TLC, saying all that i agree plastic isn't the greatest thing to be put in a multitool. :)
OK, but in the Core, the plastic doesn't touch your skin--it's on the inside of the tool only. So, there is no benefit of comfort or temperature. I can't say that my Swisstools have needed any TLC either. Some of my Leathermans have, though. :P :D
Just looking at a Core now. The Zytel is used as a spacer, I can see why I think. The tool has a LOT of very large, big tools in the handles, meaning the handles need to be wide. I guess that gives you a choice of thickening the plier heads to nearly double their actual size, or using spacers.
The pliers would be unwieldy at twice the thickness, so I guess spacers are the way to go. Four sizeable chunks of steel might be heavy - and I'm guessing quite abrasive.
There's no stresses on the plastic at all, so apart from the risk of melting - I can't see a problem myself.
I've really beaten on this Core, it ain't going to break easily!
-
@DaveK said:
There's no stresses on the plastic at all, so apart from the risk of melting - I can't see a problem myself.I've really beaten on this Core, it ain't going to break easily!
Right. The melting was the only thing I was concerned with. If I was in a survival situation and dropped my tool into a fire for a few seconds, I have a problem on my hands. It is a rare possibility, but one that I would consider when buying a multi-tool w/plastic inserts vs. one without. In fact, I would probably pass up SOG for that reason also.
-
There's no stresses on the plastic at all, so apart from the risk of melting - I can't see a problem myself.
I've really beaten on this Core, it ain't going to break easily!
Right. The melting was the only thing I was concerned with. If I was in a survival situation and dropped my tool into a fire for a few seconds, I have a problem on my hands. It is a rare possibility, but one that I would consider when buying a multi-tool w/plastic inserts vs. one without. In fact, I would probably pass up SOG for that reason also.
It's a fair point - I'll give you that. I guess the same could be said of nylon washers too.
I'm curious now about how quickly or easily Zytel melts. Anyone lend me a Core?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
I do too. AND I like Swisstools as well.