Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

SOG Episodes

Scheduled Pinned Locked Moved SOG Tool Forum
84 Posts 1 Posters 15.0k Views
  1. Home
  2. Tool Talk
  3. SOG Tool Forum
  4. SOG Episodes
SOG Episodes
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • sLaughterMed Offline
    sLaughterMed
    Posts: 3,450
    sLaughterMed Offline
    sLaughterMed
    wrote on last edited by
    #46 Quote Reply

      Was working on the CrossCut page, and noticed something I had never heard mentioned before. Take a look at the grind on Chako's CrossCut

      Now look at J-Sew's OG CrossCut (the one with the Hex Bolts) in this picture:

      See the differences in the scissor grind? It looks like SOG made this change during the OG CrossCut's production, rather than with the introduction of the 2.0 like I had originally assumed.

      I wonder if there is a TiNi CrossCut with the more acute (older?) scissor grind?

      Laughter is the best Medicine
      Slaughter is just Laughter with an "S"

      We are looking for Multitool Encyclopedia Editors! If you are interested, please give me a PM!

      The Multitool Encyclopedia Editing for Dummies Page: http://forum.multitool.org/index.php/topic,65751.0.html
      Multitool Encyclopedia Suggested Edits Page: http://forum.multitool.org/index.php/topic,65746.0.html

      Merit Badges
      SAKWiki User SOG Power Challenge Hacker Multitool Encyclopedia User EDC Pocket Dump Challenge BO Tools Level 2 Santa Ignore MP600 Collector
      1 Reply Last reply
      • Poncho65 Offline
        Poncho65
        Global Moderators
        Posts: 87,638
        Poncho65 Offline
        Poncho65
        Global Moderators
        wrote on last edited by
        #47 Quote Reply

          Good catch :tu: Took a very watchful eye and memory to notice that :cheers:

          Merit Badges
          BO Tools Level 2 Japanese PST Reviewer Photographer Axe User Fire Making Hacker Multitool Encyclopedia User OCD Squad Time Lord Level 1 Mod User Duct Tape Discontinued SAK/MT Challenge The SUPER Challenge EDC Pocket Dump Challenge Def's 50k Challenge LM Rebar Challenge Traditional Folder Challenge Gerber MP Challenge Modified SAK Challenge MTo Anniversary Challenge Victorinox SwissTool Challenge LM Surge Challenge Level 2 Victorinox Spirit Challenge MTO Rotation Challenge LM Wave Challenge Calendar   2017 Calendar  2018 Calendar 2019 LM Surge Challenge Level 3 Keychain Challenge LM Crunch 15 day Challenge LM OHT Challenge PST 30 Day Challenge Calendar 2020 14th Anniversary Anything Goes Challenge Skeletool 30 Day Challenge The Batman 30 Day Challenge Poker Face Challenge Daredevil challenge The 30 Day MiniTool Challenge 30 Day Locks Up Challenge One Piece Collector 30 Day Rhymes with Orange Challenge Bond 30 Day Challenge Wally Badge 30 Day Ratchet Challenge
          1 Reply Last reply
          • gregozedobe Offline
            gregozedobe
            Posts: 5,148
            gregozedobe Offline
            gregozedobe
            wrote on last edited by gregozedobe
            #48 Quote Reply

              @sLaughterMed said:
              See the differences in the scissor grind? It looks like SOG made this change during the OG CrossCut's production, rather than with the introduction of the 2.0 like I had originally assumed.

              I wonder if there is a TiNi CrossCut with the more acute (older?) scissor grind?

              Hmmm, this aroused my curiosity, so I had a look at all my USA Crosscuts and CrossGrips.

              I only have one TiN CrossCut (they are hard to find), and it has the less acute (newer ?) scissor grind. It does have the (older ?) hex screws.

              Then I checked on my SS CrossCuts. 3 had the less acute (newer ?) scissor grind, while one (# 671) had the more acute/complex (older ?) scissor grind. All had hex screws and "SOG, USA" stamped around the scissors pivot (the USA was hidden when they are opened up).

              I found there were also two different tweezers on CrossCuts as well. One that is much more complex in shape and rotated 90 degrees compared with the simpler tweezers on the other (newer ? ) CrossCuts. The reason I'm guessing the complex tweezers are the original (older?) design is because the simpler (newer?) design would be cheaper to make.

              I suspect the older tweezers are less common as I only have them on two CrossCuts ( one SS with the older scissor grind and one TiN with the newer scissor grind), while my CrossGrips (all 18 of them) had the newer, simple design.

              So my guess (based on a limited sample size, but it seems reasonable) is the early days of (USA, not China) CrossXXX production went something like this:

              CrossCut production started with complex (double grind) scissors and complex tweezers.
              CrossCut changed to simpler (single grind) scissors, still with complex tweezers.
              CrossCut changed to simple tweezers.
              CrossGrip production started with simple tweezers.

              Does anyone know of any CrossCuts or CrossGrips that are exceptions to the above ? Of course anyone can easily mod these little tools as they are quite easy to pull apart and re-assemble with different components.

              Sorry, I have no idea on what dates these changes happened, and I can't do photos.

              babola: "Enjoy your tools and don't be afraid to air your opinion and feelings here, but do it in courteous and respectable way toward others, of course."

              1 Reply Last reply
              • sLaughterMed Offline
                sLaughterMed
                Posts: 3,450
                sLaughterMed Offline
                sLaughterMed
                wrote on last edited by sLaughterMed
                #49 Quote Reply

                  @gregozedobe said:

                  @sLaughterMed said:

                  See the differences in the scissor grind? It looks like SOG made this change during the OG CrossCut's production, rather than with the introduction of the 2.0 like I had originally assumed.

                  I wonder if there is a TiNi CrossCut with the more acute (older?) scissor grind?

                  Hmmm, this aroused my curiosity, so I had a look at all my USA Crosscuts and CrossGrips.

                  I only have one TiN CrossCut (they are hard to find), and it has the less acute (newer ?) scissor grind. It does have the (older ?) hex screws.

                  Then I checked on my SS CrossCuts. 3 had the less acute (newer ?) scissor grind, while one (# 671) had the more acute/complex (older ?) scissor grind. All had hex screws and "SOG, USA" stamped around the scissors pivot (the USA was hidden when they are opened up).

                  I found there were also two different tweezers on CrossCuts as well. One that is much more complex in shape and rotated 90 degrees compared with the simpler tweezers on the other (newer ? ) CrossCuts. The reason I'm guessing the complex tweezers are the original (older?) design is because the simpler (newer?) design would be cheaper to make.

                  I suspect the older tweezers are less common as I only have them on two CrossCuts ( one SS with the older scissor grind and one TiN with the newer scissor grind), while my CrossGrips (all 18 of them) had the newer, simple design.

                  So my guess (based on a limited sample size, but it seems reasonable) is the early days of (USA, not China) CrossXXX production went something like this:

                  CrossCut production started with complex (double grind) scissors and complex tweezers.
                  CrossCut changed to simpler (single grind) scissors, still with complex tweezers.
                  CrossCut changed to simple tweezers.
                  CrossGrip production started with simple tweezers.

                  Does anyone know of any CrossCuts or CrossGrips that are exceptions to the above ? Of course anyone can easily mod these little tools as they are quite easy to pull apart and re-assemble with different components.

                  Thank you!
                  I had litterally just noticed the more "complex" tweezers as well. Get a load of this sexy beast:
                  It is Zed's, and it is a black TiNi CrossCut. Isn't it pretty?

                  I think I agree with your analysis of the CrossCut's lifetime. It looks like SOG started with the simple Tweezers, tried out the more complex tweezers, and then moved back to the simple tweezers.

                  Simple Tweezers & Complex Grind
                  Complex Tweezers & Complex Grind
                  Complex Tweezers and Simple Grind
                  Back to Simple Tweezers, Simple Grind.

                  Also, any CrossCut's with torx screw construction are actually CrossCut 2.0's. It was produced from 2011 to 2015 (i think?), in China.

                  There's also a Tigerstripe CrossGrip (Bob's pic)

                  I wonder if there was ever a tigerstripe CrossCut, or a Black TiNi CrossGrip?

                  Laughter is the best Medicine
                  Slaughter is just Laughter with an "S"

                  We are looking for Multitool Encyclopedia Editors! If you are interested, please give me a PM!

                  The Multitool Encyclopedia Editing for Dummies Page: http://forum.multitool.org/index.php/topic,65751.0.html
                  Multitool Encyclopedia Suggested Edits Page: http://forum.multitool.org/index.php/topic,65746.0.html

                  Merit Badges
                  SAKWiki User SOG Power Challenge Hacker Multitool Encyclopedia User EDC Pocket Dump Challenge BO Tools Level 2 Santa Ignore MP600 Collector
                  1 Reply Last reply
                  • gregozedobe Offline
                    gregozedobe
                    Posts: 5,148
                    gregozedobe Offline
                    gregozedobe
                    wrote on last edited by
                    #50 Quote Reply

                      Those CrossXXX with different finishes certainly are rare (they almost make the TiN finished versions look "common" :pok: ). I think I read somewhere that the "tiger" finished SOG MTs were a special run produced for the US military only, which is why they are so rare.

                      I'm curious why you think SOG started out with the simple tweezers, then moved to the complex tweezers, then reverted back to the simple ones again ?

                      babola: "Enjoy your tools and don't be afraid to air your opinion and feelings here, but do it in courteous and respectable way toward others, of course."

                      1 Reply Last reply
                      • sLaughterMed Offline
                        sLaughterMed
                        Posts: 3,450
                        sLaughterMed Offline
                        sLaughterMed
                        wrote on last edited by sLaughterMed
                        #51 Quote Reply

                          @gregozedobe said:
                          Those CrossXXX with different finishes certainly are rare (they almost make the TiN finished versions look "common" :pok: ). I think I read somewhere that the "tiger" finished SOG MTs were a special run produced for the US military only, which is why they are so rare.

                          I'm curious why you think SOG started out with the simple tweezers, then moved to the complex tweezers, then reverted back to the simple ones again ?

                          No idea, some how that idea got stuck in my head. After doing some looking, I'm pretty certain im wrong about that ::) In my defense, its late, and im tired.

                          So it goes:
                          Complex Grind, Complex tweezers
                          Simple Grind, Complex Tweezers
                          Simple Grind, Simple Tweezers

                          Never heard that about the tiger stripe models before, I'll have to do some digging on that tommorow

                          Laughter is the best Medicine
                          Slaughter is just Laughter with an "S"

                          We are looking for Multitool Encyclopedia Editors! If you are interested, please give me a PM!

                          The Multitool Encyclopedia Editing for Dummies Page: http://forum.multitool.org/index.php/topic,65751.0.html
                          Multitool Encyclopedia Suggested Edits Page: http://forum.multitool.org/index.php/topic,65746.0.html

                          Merit Badges
                          SAKWiki User SOG Power Challenge Hacker Multitool Encyclopedia User EDC Pocket Dump Challenge BO Tools Level 2 Santa Ignore MP600 Collector
                          1 Reply Last reply
                          • sLaughterMed Offline
                            sLaughterMed
                            Posts: 3,450
                            sLaughterMed Offline
                            sLaughterMed
                            wrote on last edited by
                            #52 Quote Reply

                              Just noticed something else very interesting. We might need to regthink the 1998 introduction date for the CrossCut. Take a close look at the picture from the November 1998 Boy's Life issue

                              It has the complex tweezers, but the simple scissor grind. 11 months is a very short amount of time for SOG to change production on a tool.

                              I think this might pushes introduction closer to 1997, or even 1996, the same year the Micra came out :o Some very interesting implications there...

                              Laughter is the best Medicine
                              Slaughter is just Laughter with an "S"

                              We are looking for Multitool Encyclopedia Editors! If you are interested, please give me a PM!

                              The Multitool Encyclopedia Editing for Dummies Page: http://forum.multitool.org/index.php/topic,65751.0.html
                              Multitool Encyclopedia Suggested Edits Page: http://forum.multitool.org/index.php/topic,65746.0.html

                              Merit Badges
                              SAKWiki User SOG Power Challenge Hacker Multitool Encyclopedia User EDC Pocket Dump Challenge BO Tools Level 2 Santa Ignore MP600 Collector
                              1 Reply Last reply
                              • gregozedobe Offline
                                gregozedobe
                                Posts: 5,148
                                gregozedobe Offline
                                gregozedobe
                                wrote on last edited by gregozedobe
                                #53 Quote Reply

                                  It wouldn't surprise me that SOG simplified the scissor grind quite quickly after initial production started; changes to save money would always get fast-tracked whenever possible. It would also explain why we see so few of the complex ground scissors if they were only made for as short time.

                                  You should see how many changes Gerber made to the original Multi-Plier (Mr Pinchy) v1 in a short time (handle cutouts and nail nicks on blades).

                                  Keep up the good work on this SOG history stuff, and if I can help in any way please ask :tu:

                                  babola: "Enjoy your tools and don't be afraid to air your opinion and feelings here, but do it in courteous and respectable way toward others, of course."

                                  1 Reply Last reply
                                  • Chako Offline
                                    Chako
                                    Posts: 22,725
                                    Chako Offline
                                    Chako
                                    wrote on last edited by Chako
                                    #54 Quote Reply

                                      Great discussion.

                                      I emailed SOG a while back and just got a response. A gentleman in Marketing over at SOG is willing to do some digging. I sent him a few questions and time will tell if he is able to find some info for us.

                                      Of all the multi-tool manufacturers, I find I know less about SOG. I hope he is able to nail some intro dates, etc for us. Any info he finds and tells me, I will relay to this forum.

                                      A little Leatherman information.

                                      <a href="http://forum.multitool.org/index.php/topic,52305.0.html">[b]Leatherman series articles[b]</a>

                                      Merit Badges
                                      One Piece Collector MTO Tool MP600 Collector Juice Collector Level 3 Japanese PST Charge Collector Sporkman OCD Squad Flashlight Fire Making Scale Changer Photographer Gun User BO Tools Level 3 Time Lord Level 3 Airgun User ALOX Colors Level 3
                                      1 Reply Last reply
                                      • sLaughterMed Offline
                                        sLaughterMed
                                        Posts: 3,450
                                        sLaughterMed Offline
                                        sLaughterMed
                                        wrote on last edited by
                                        #55 Quote Reply

                                          @Chako said:
                                          Great discussion.

                                          I emailed SOG a while back and just got a response. A gentleman in Marketing over at SOG is willing to do some digging. I sent him a few questions and time will tell if he is able to find some info for us.

                                          Of all the multi-tool manufacturers, I find I know less about SOG. I hope he is able to nail some intro dates, etc for us. Any info he finds and tells me, I will relay to this forum.

                                          Awesome, cant wait to hear back

                                          Laughter is the best Medicine
                                          Slaughter is just Laughter with an "S"

                                          We are looking for Multitool Encyclopedia Editors! If you are interested, please give me a PM!

                                          The Multitool Encyclopedia Editing for Dummies Page: http://forum.multitool.org/index.php/topic,65751.0.html
                                          Multitool Encyclopedia Suggested Edits Page: http://forum.multitool.org/index.php/topic,65746.0.html

                                          Merit Badges
                                          SAKWiki User SOG Power Challenge Hacker Multitool Encyclopedia User EDC Pocket Dump Challenge BO Tools Level 2 Santa Ignore MP600 Collector
                                          1 Reply Last reply
                                          • Chako Offline
                                            Chako
                                            Posts: 22,725
                                            Chako Offline
                                            Chako
                                            wrote on last edited by Chako
                                            #56 Quote Reply

                                              I checked my emails and I received a response to a series of questions I had asked SOG. Louis Chan, Marketing Coordinator was kind enough to respond and look up some information. I will post the whole email here for everyone to see.

                                              When did each model come to market?
                                              · PowerLock – 1998
                                              · PowerLock Traveler – 2015
                                              · PowerLock w/ V-Cutter – 2007
                                              · PowerLock EOD - 2002
                                              · PowerAssist – 2008
                                              · CrossCut 2.0 – 2010
                                              · CrossCut - 2000
                                              · PowerPlay – 2016
                                              · Reactor – 2016
                                              · Pocket PowerPlier – 1998
                                              · MacV Tool – 2016
                                              · SwitchPlier 2.0 – 2015
                                              · SwitchPlier - 2001
                                              · ParaTool – 1993
                                              · PowerDuo – 2012
                                              · ToolClip - 1990
                                              · Micro ToolClip - ~1992-93 (est.)
                                              · CrossGrip - 2000
                                              · Power Plier – 1994-99 (est.)
                                              · Vino - 2001
                                              Some of these are estimated. I’m basing a lot of the pre-1999 dates off catalogs and we didn’t do catalogs every year.

                                              **2. I understand that a tiger finished SOG PowerLock was produced...how many of those were produced and for which market? **No idea. The few people that I asked have heard about it, but weren’t sure if we did them in-house or it was custom by a distributor or another place.

                                              3. What time frame were the TiNi models produced? Gold & black TiNi started in 2000. Gold stopped a 2-4 years after that, I believe. Black TiNi was switched to Black Oxide coating sometime as well.

                                              4. Any variations within a models production time line is always good information. For example...model differences or slight variations and when they happened. For example, how long did the first generation ToolClip was produced, then switched over to the second generation. There were a lot of running changes based on testing and feedback from customers. A lot of these weren’t officially documented. Only the CrossCut and SwitchPlier had major updates hence their 2.0 successor.

                                              I’m sure you probably know about this page: http://www.sogknives.com/catalog-downloads.html
                                              It’s got all our catalogs back to 2006.

                                              LOUIS CHAN / Marketing Coordinator
                                              SOG SPECIALTY KNIVES & TOOLS

                                              A little Leatherman information.

                                              <a href="http://forum.multitool.org/index.php/topic,52305.0.html">[b]Leatherman series articles[b]</a>

                                              Merit Badges
                                              One Piece Collector MTO Tool MP600 Collector Juice Collector Level 3 Japanese PST Charge Collector Sporkman OCD Squad Flashlight Fire Making Scale Changer Photographer Gun User BO Tools Level 3 Time Lord Level 3 Airgun User ALOX Colors Level 3
                                              1 Reply Last reply
                                              • sLaughterMed Offline
                                                sLaughterMed
                                                Posts: 3,450
                                                sLaughterMed Offline
                                                sLaughterMed
                                                wrote on last edited by
                                                #57 Quote Reply

                                                  @Chako said:
                                                  I checked my emails and I received a response to a series of questions I had asked SOG. Louis Chan, Marketing Coordinator was kind enough to respond and look up some information. I will post the whole email here for everyone to see.

                                                  When did each model come to market?
                                                  · PowerLock – 1998
                                                  · PowerLock Traveler – 2015
                                                  · PowerLock w/ V-Cutter – 2007
                                                  · PowerLock EOD - 2002
                                                  · PowerAssist – 2008
                                                  · CrossCut 2.0 – 2010
                                                  · CrossCut - 2000
                                                  · PowerPlay – 2016
                                                  · Reactor – 2016
                                                  · Pocket PowerPlier – 1998
                                                  · MacV Tool – 2016
                                                  · SwitchPlier 2.0 – 2015
                                                  · SwitchPlier - 2001
                                                  · ParaTool – 1993
                                                  · PowerDuo – 2012
                                                  · ToolClip - 1990
                                                  · Micro ToolClip - ~1992-93 (est.)
                                                  · CrossGrip - 2000
                                                  · Power Plier – 1994-99 (est.)
                                                  · Vino - 2001
                                                  Some of these are estimated. I’m basing a lot of the pre-1999 dates off catalogs and we didn’t do catalogs every year.

                                                  **2. I understand that a tiger finished SOG PowerLock was produced...how many of those were produced and for which market? **No idea. The few people that I asked have heard about it, but weren’t sure if we did them in-house or it was custom by a distributor or another place.

                                                  3. What time frame were the TiNi models produced? Gold & black TiNi started in 2000. Gold stopped a 2-4 years after that, I believe. Black TiNi was switched to Black Oxide coating sometime as well.

                                                  4. Any variations within a models production time line is always good information. For example...model differences or slight variations and when they happened. For example, how long did the first generation ToolClip was produced, then switched over to the second generation. There were a lot of running changes based on testing and feedback from customers. A lot of these weren’t officially documented. Only the CrossCut and SwitchPlier had major updates hence their 2.0 successor.

                                                  I’m sure you probably know about this page: http://www.sogknives.com/catalog-downloads.html
                                                  It’s got all our catalogs back to 2006.

                                                  LOUIS CHAN / Marketing Coordinator
                                                  SOG SPECIALTY KNIVES & TOOLS

                                                  Whoo hoo, a solid date for the Pocket PowerPlier :ahhh

                                                  Laughter is the best Medicine
                                                  Slaughter is just Laughter with an "S"

                                                  We are looking for Multitool Encyclopedia Editors! If you are interested, please give me a PM!

                                                  The Multitool Encyclopedia Editing for Dummies Page: http://forum.multitool.org/index.php/topic,65751.0.html
                                                  Multitool Encyclopedia Suggested Edits Page: http://forum.multitool.org/index.php/topic,65746.0.html

                                                  Merit Badges
                                                  SAKWiki User SOG Power Challenge Hacker Multitool Encyclopedia User EDC Pocket Dump Challenge BO Tools Level 2 Santa Ignore MP600 Collector
                                                  1 Reply Last reply
                                                  • Chako Offline
                                                    Chako
                                                    Posts: 22,725
                                                    Chako Offline
                                                    Chako
                                                    wrote on last edited by
                                                    #58 Quote Reply

                                                      SOG PowerPlay with molded sheath.

                                                      I just got this one in a few days ago and thought it should be added to this thread.

                                                      The SOG PowerPlay is a new for 2016 multi-tool that features a good tool set, but in my opinion, has an Achilles heel.

                                                      If SOG is competing for shelf space, then I think they just won with the largest package to ever hold this size of multi-tool. I mean, this reminds me of the old PC days when you got a big box of air with a floppy and a small instruction booklet...but that was back in the late 80s and 90s.

                                                      Look how thick this packaging is. I thought I was receiving a Gerber Cable Dawg!
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2030small_zpsuoxrpmzh.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2030small_zpsuoxrpmzh.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      Opening this honking big packaging, my expectations were high.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2031small_zpsoin9xetp.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2031small_zpsoin9xetp.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      Pulling the inner cardboard insert...I was deflated. Look at all that wasted space. :facepalm:
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2032small_zpsvauyydrt.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2032small_zpsvauyydrt.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      Two plastic tray inserts...one for the multi-tool, the other for the molded sheath and instructions. Yep, back to the haydays of big boxes occupying maximum space. Come on SOG, you need to start thinking green somewhat.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2032small_zpsvauyydrt.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2032small_zpsvauyydrt.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      Once the bulky packaging was put aside, this is what that big box contained.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2034small_zpszyvbyb96.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2034small_zpszyvbyb96.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      The molded sheath is slick. I actually like the sheath quite a bit, It holds the tool snuggly either way thanks to raised side channels that accommodate the knife blade side which is raised somewhat from the other side.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2035small_zpsqgwg6ht7.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2035small_zpsqgwg6ht7.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      The molded sheath has good texturing to facilitate tool extraction, and a very nice hard plastic belt loop which is open on one side. I like this a lot as you can wear the sheath without having to take off your belt and loop it back on afterwards.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2036small_zpsdd5u1iss.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2036small_zpsdd5u1iss.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      The plastic belt loop is nice and wide.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2037small_zpsiy3d3mlw.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2037small_zpsiy3d3mlw.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      The one thing that had me a little confused at first was the two raised sides that allowed the tool to fit in the sheath either left or right. At first, I thought cool, much like some Leatherman sheaths, this molded plastic one will allow you to carry the tool either closed or open...well..as soon as I tried to place the tool in the sheath open, it didn't fit correctly.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2061small_zpsmpzocw4c.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2061small_zpsmpzocw4c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      It was only then, upon closer inspection, that I saw the sheath was designed to hold the tool closed. On the plus side, the molded sheath has a nice rubber retentioner that is very easy to use. It does not however close on the tool in the open configuration.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2062small_zpsq3pvptpu.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2062small_zpsq3pvptpu.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      Even with that limitation...and I will admit, it would have been great to be able to store the tool open in the molded sheath, I still like the sheath. It is minimal, has a good belt loop system, and the rubber retention strap is super easy to use and secure. The tool also fits inside the sheath like a glove.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2038small_zps5njiialy.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2038small_zps5njiialy.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      One thing I have to say about SOG, they sure love to brand their tools repeatedly. The PowerPlay is no exception. However, it looks like a more sinister logo is used. This logo is one I haven't seen yet on their multi-tool even though it is an old SOG logo.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2040small_zps2va8uivz.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2040small_zps2va8uivz.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      Looking at one side of the tool, you can see the locking mechanism studs sticking out on the bottom. More on those later.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2041small_zpsfqibmd2m.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2041small_zpsfqibmd2m.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      The PowerPlay features a plain edge blade as well as a serrated blade...both on the same handle. Much like the old Leatherman Wave, you also get a small, medium, and large flat screwdriver. I always found that to be overkill, but that is just my personal opinion. At least one of the larger flat drivers may do double duty as a scrapper in a pinch. On top of that, you get a dedicated eyeglass flat driver, but unlike the replaceable ones found on some Leathermans (you can lose those), this one is fixed, and looking a tad fradgile for my liking. You also get an awl, file, saw, bottle and can openers along with wire cutter and pliers. A neat feature is a 1/4" bit driver with magnetic feature situated on the pliers end of the closed tool.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2044small_zpsoirjy4f4.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2044small_zpsoirjy4f4.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      A close up of the pliers along with the compound leverage gears. I noticed the lack of gear covers to protect finger pinch. Not a big issue as you would have to be rather dedicated to get your fingers stuck in there.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2045small_zpsuene47ry.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2045small_zpsuene47ry.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2052small_zpstpt3iqni.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2052small_zpstpt3iqni.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      Only one handle as these metal covers on both sides. At first, I though my copy was defective because I had assumed my other handle side was missing their metal plates. To me, the tool looks unfinished...but once again, that is a personal opinion.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2046small_zpsphaoh9bq.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2046small_zpsphaoh9bq.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      Now we come to the one thing I cannot stand about this tool. The Achilles heel are those two locking mechanism studs. Now, what I am about to say is something that bothers me about this tool. In all fairness, this may not be an issue to you. With that said, I find having to use two hands, or one if you are ambidextrous enough, along with the poor vector direction of the force required, makes unlocking any tool a major pain. Worse, yet, there is a mirroring in the handles, which means, I have an easier time opening the outside tools that feature the two blades, and a heck of a time unlocking the other handle with the inner facing tools. Why not use the usual back levers, or have the studs moved backwards as opposed to 45 degree angle you need to move these studs. For me, this is almost a deal breaker for this tool.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2051small_zpsc9h6v79x.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2051small_zpsc9h6v79x.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      Here we can see the compound leverage gears in use, as well as the docking site for the 1/4" driver bits. Note that there are two small circular magnets, one on each side. They work good in holding the bits in there.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2053small_zpsqlegaigi.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2053small_zpsqlegaigi.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2055small_zpsluyd1v0o.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2055small_zpsluyd1v0o.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      Note that when you install a 1/4" driver bit, the tool does not completely close, even though the bit is very secure as that part does clamp down tightly on the driver bit.. I really like the geometry of this setup however. One of the better driver implementations I have seen on a multi-tool.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2056small_zpsy8lwqgbk.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2056small_zpsy8lwqgbk.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      Yes, those little magnets do a good job of holding the driver bits. Great feature and should hopefully eliminate a lot of swearing and driver bit searches on the ground.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2057small_zpsd12evwos.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2057small_zpsd12evwos.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      A lot of newer SOG tools feature a crenelated decoration. The PowerPlay is no different, if much more subtle.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2058small_zpswxcblebs.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2058small_zpswxcblebs.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      Not only do you get the menacing SOG skull logo on the sheath, there is a more subdued version on the edge of the PowerPlay.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2059small_zps9zqsrihb.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2059small_zps9zqsrihb.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      It is a nice multi-tool as far as comfort and ergonomics go.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2060ssmall_zpsulofaupj.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2060ssmall_zpsulofaupj.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      I have noticed some rotational play on the handles in the closed position. They aren't exactly lined up either. I am happy to state that once opened, the rotational play disappears. There is also no handle play when the PowerPlay is opened.
                                                      <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2064small_zpszfapkic8.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2064small_zpszfapkic8.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                      In conclusion, there is a lot to like about the SOG PowerPlay. It is very ergonomic. The tools have good geometry for ease of use. The end bit driver is a winner in my books and is situated dead center of the tool. I dislike off center tools for use. They just don't rotate around an axis nicely, and this one is one of the nicest implementations for a multi-tool I have seen yet. The PowerPlay also features 18 tool counts...so it is not lacking in the feature department.

                                                      Now for the Achilles heel of the PowerPlay. I just can't get along with those unlocking stud mechanisms. The geometry due to both handles being in the same orientation (meaning you get one handle with outside opening tools, and one handle with inside opening tools), makes one of the handles a tad awkward for me to open, and I am right handed. I also find the spring very stiff on the studs, and I guess they should soften with time...however as a new tool, one handle is a bit of a bear to unlock the folding tools.

                                                      Overall, there is much to like about the PowerPlay. I find it is let down by the not that user friendly unlocking studs. With that said, like everything else, you may not be bothered by those studs as much as I am. If nothing else, look at the photos and make your own opinions.

                                                      A little Leatherman information.

                                                      <a href="http://forum.multitool.org/index.php/topic,52305.0.html">[b]Leatherman series articles[b]</a>

                                                      Merit Badges
                                                      One Piece Collector MTO Tool MP600 Collector Juice Collector Level 3 Japanese PST Charge Collector Sporkman OCD Squad Flashlight Fire Making Scale Changer Photographer Gun User BO Tools Level 3 Time Lord Level 3 Airgun User ALOX Colors Level 3
                                                      1 Reply Last reply
                                                      • sLaughterMed Offline
                                                        sLaughterMed
                                                        Posts: 3,450
                                                        sLaughterMed Offline
                                                        sLaughterMed
                                                        wrote on last edited by
                                                        #59 Quote Reply

                                                          Nice write up on the PowerPlay Chako. There are a lot of little details you pointed out that I missed tht last time I checked out a PowerPlay, specifically the skull logo, and that the gear linkage is inside the handles, rather than outside like on the PowerPlier (which I think looks rather cool).

                                                          I have to agree on the locks too, I think changing from the ones on the PowerLock was a mistake. The nubs stick out too far, and disengagement can be difficult.

                                                          Laughter is the best Medicine
                                                          Slaughter is just Laughter with an "S"

                                                          We are looking for Multitool Encyclopedia Editors! If you are interested, please give me a PM!

                                                          The Multitool Encyclopedia Editing for Dummies Page: http://forum.multitool.org/index.php/topic,65751.0.html
                                                          Multitool Encyclopedia Suggested Edits Page: http://forum.multitool.org/index.php/topic,65746.0.html

                                                          Merit Badges
                                                          SAKWiki User SOG Power Challenge Hacker Multitool Encyclopedia User EDC Pocket Dump Challenge BO Tools Level 2 Santa Ignore MP600 Collector
                                                          1 Reply Last reply
                                                          • Swiss Guy Offline
                                                            Swiss Guy
                                                            Posts: 165
                                                            Swiss Guy Offline
                                                            Swiss Guy
                                                            wrote on last edited by
                                                            #60 Quote Reply

                                                              @Chako said:
                                                              Yes, those little magnets do a good job of holding the driver bits. Great feature and should hopefully eliminate a lot of swearing and driver bit searches on the ground.

                                                              I am curious how that bit holder works in actual use. It looks to me like you would have to keep pressure on the bit to keep it from slipping, which means having to keep constant pressure on the handles when turning a screw. Is that the case, or do the handles lock in position so that you do not have to squeeze them through the entire turning motion?

                                                              The right tool is the one you have on you

                                                              Merit Badges
                                                              Hook User Scale Changer
                                                              1 Reply Last reply
                                                              • Chako Offline
                                                                Chako
                                                                Posts: 22,725
                                                                Chako Offline
                                                                Chako
                                                                wrote on last edited by Chako
                                                                #61 Quote Reply

                                                                  sLaughterMed, if nothing else, the photos are useful. :)

                                                                  Swiss Guy, I have tried it on a screw and this is what I quickly found out.

                                                                  1. The tool quickly locks onto the bit with no play.
                                                                  2. A round rare earth magnet is found on each side of the bit holder. This will hold the bit in place even if you open the tool a little.
                                                                  3. Little to no pressure was required during the act of screwing, :whistle:
                                                                  4. The location of the bit in relation to the tool meant little wasted energy was needed to keep the bit on the head of the screw.

                                                                  For what it is, it works rather well...at least in my limited one time test.

                                                                  A little Leatherman information.

                                                                  <a href="http://forum.multitool.org/index.php/topic,52305.0.html">[b]Leatherman series articles[b]</a>

                                                                  Merit Badges
                                                                  One Piece Collector MTO Tool MP600 Collector Juice Collector Level 3 Japanese PST Charge Collector Sporkman OCD Squad Flashlight Fire Making Scale Changer Photographer Gun User BO Tools Level 3 Time Lord Level 3 Airgun User ALOX Colors Level 3
                                                                  1 Reply Last reply
                                                                  • Swiss Guy Offline
                                                                    Swiss Guy
                                                                    Posts: 165
                                                                    Swiss Guy Offline
                                                                    Swiss Guy
                                                                    wrote on last edited by
                                                                    #62 Quote Reply

                                                                      @Chako said:
                                                                      sLaughterMed, if nothing else, the photos are useful. :)

                                                                      Swiss Guy, I have tried it on a screw and this is what I quickly found out.

                                                                      1. The tool quickly locks onto the bit with no play.
                                                                      2. A round rare earth magnet is found on each side of the bit holder. This will hold the bit in place even if you open the tool a little.
                                                                      3. Little to no pressure was required during the act of screwing, :whistle:
                                                                      4. The location of the bit in relation to the tool meant little wasted energy was needed to keep the bit on the head of the screw.

                                                                      For what it is, it works rather well...at least in my limited one time test.

                                                                      Thanks for the response. I am tempted to get one. The only thing that was holding me back was the way the bit was held in. I think that it is an innovative way to hold a bit as long as it works well. It is time to browse the Bay of E to see what is available.

                                                                      The right tool is the one you have on you

                                                                      Merit Badges
                                                                      Hook User Scale Changer
                                                                      1 Reply Last reply
                                                                      • Poncho65 Offline
                                                                        Poncho65
                                                                        Global Moderators
                                                                        Posts: 87,638
                                                                        Poncho65 Offline
                                                                        Poncho65
                                                                        Global Moderators
                                                                        wrote on last edited by
                                                                        #63 Quote Reply

                                                                          Great pics as usual Chako :cheers: Nice write-up as well :like:

                                                                          Merit Badges
                                                                          BO Tools Level 2 Japanese PST Reviewer Photographer Axe User Fire Making Hacker Multitool Encyclopedia User OCD Squad Time Lord Level 1 Mod User Duct Tape Discontinued SAK/MT Challenge The SUPER Challenge EDC Pocket Dump Challenge Def's 50k Challenge LM Rebar Challenge Traditional Folder Challenge Gerber MP Challenge Modified SAK Challenge MTo Anniversary Challenge Victorinox SwissTool Challenge LM Surge Challenge Level 2 Victorinox Spirit Challenge MTO Rotation Challenge LM Wave Challenge Calendar   2017 Calendar  2018 Calendar 2019 LM Surge Challenge Level 3 Keychain Challenge LM Crunch 15 day Challenge LM OHT Challenge PST 30 Day Challenge Calendar 2020 14th Anniversary Anything Goes Challenge Skeletool 30 Day Challenge The Batman 30 Day Challenge Poker Face Challenge Daredevil challenge The 30 Day MiniTool Challenge 30 Day Locks Up Challenge One Piece Collector 30 Day Rhymes with Orange Challenge Bond 30 Day Challenge Wally Badge 30 Day Ratchet Challenge
                                                                          1 Reply Last reply
                                                                          • Chako Offline
                                                                            Chako
                                                                            Posts: 22,725
                                                                            Chako Offline
                                                                            Chako
                                                                            wrote on last edited by
                                                                            #64 Quote Reply

                                                                              :salute:

                                                                              A little Leatherman information.

                                                                              <a href="http://forum.multitool.org/index.php/topic,52305.0.html">[b]Leatherman series articles[b]</a>

                                                                              Merit Badges
                                                                              One Piece Collector MTO Tool MP600 Collector Juice Collector Level 3 Japanese PST Charge Collector Sporkman OCD Squad Flashlight Fire Making Scale Changer Photographer Gun User BO Tools Level 3 Time Lord Level 3 Airgun User ALOX Colors Level 3
                                                                              1 Reply Last reply
                                                                              • Chako Offline
                                                                                Chako
                                                                                Posts: 22,725
                                                                                Chako Offline
                                                                                Chako
                                                                                wrote on last edited by
                                                                                #65 Quote Reply

                                                                                  SOG MACV Tool.

                                                                                  I suppose if we were to look at the naming convention based upon a historical context, the tool should have been named MACV SOG, as in Military Assistance Command Vietnam Studies and Observation Group. I won't venture further into the history of this group other than to send you to a useful WikiPedia link...

                                                                                  Link Preview Image
                                                                                  Military Assistance Command, Vietnam – Studies and Observations Group - Wikipedia

                                                                                  favicon

                                                                                  (en.wikipedia.org)

                                                                                  I include this history because it imparts heavily upon the naming of this tool, as well as the shape of it.

                                                                                  So what we have here with the SOG MACV Tool is a hunk of metal with various usefull shapes in an iconic image of the MACV SOG emblem of the skull with beret.

                                                                                  <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2099small_zpslq7augq5.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2099small_zpslq7augq5.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                                                  This piece of metal does impart it's owner with some useful features:

                                                                                  • nail puller
                                                                                  • phillips driver
                                                                                  • large flat driver
                                                                                  • small flat driver
                                                                                  • pry bar
                                                                                  • bottle opener
                                                                                  • 1/4" hex bit driver
                                                                                  • cord cutter
                                                                                  • carbide sharpener
                                                                                  • 1/4", 3/8", and 5/16" wrench

                                                                                  <a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2098.JPGsmall_zpsx7hz8ddy.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2098.JPGsmall_zpsx7hz8ddy.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                                                  I like that it includes a small carbide sharpener. You do not normally see that feature included in most multi-tools. The biggest disadvantage I could see in this tool, and after testing mine a little, I did notice some slight flexing...is the compromise SOG took so that their MACV Tool looks like the Special Operations Group's logo. The tools found south of the bottle opener mouth are at the tools weak point. These are held in place by 2 narrow metal bridges of sorts. This is a clear case of design taking over durability. In other word, because SOG wanted their tool to look cool, they compromised on toughness and durability. I will be curious to see if I am correct in this, with reports of folks breaking them at that weak point.

                                                                                  Still looks cool, and mean...and will look great in the drawer with the other SOG gear.

                                                                                  A little Leatherman information.

                                                                                  <a href="http://forum.multitool.org/index.php/topic,52305.0.html">[b]Leatherman series articles[b]</a>

                                                                                  Merit Badges
                                                                                  One Piece Collector MTO Tool MP600 Collector Juice Collector Level 3 Japanese PST Charge Collector Sporkman OCD Squad Flashlight Fire Making Scale Changer Photographer Gun User BO Tools Level 3 Time Lord Level 3 Airgun User ALOX Colors Level 3
                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 3
                                                                                  • 4
                                                                                  • 5
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. SOG Tool Forum
                                                                                  4. SOG Episodes
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0