It doesn't make any sense.
-
Plastic inserts can also trap moisture behind them, leading to increased rust. At least, that seems to be the case with my Kick...
-
-
Look at it this way. Is there ever any benefit to using plastic in a tool over metal? Other than to reduce weight and cost, that is...
It can be comfier, doesn't feel as cold in cold weather, doesn't rust, needs very little TLC, saying all that i agree plastic isn't the greatest thing to be put in a multitool. :)
OK, but in the Core, the plastic doesn't touch your skin--it's on the inside of the tool only. So, there is no benefit of comfort or temperature. I can't say that my Swisstools have needed any TLC either. Some of my Leathermans have, though. :P :D
I just recently rescued my Swiss Tool from the pocket of the car door (it was there about a year) the only rust was found between the awl and the phillips head. I have owned Kicks that rusted in my house sitting on a shelf. :o
-
Look at it this way. Is there ever any benefit to using plastic in a tool over metal? Other than to reduce weight and cost, that is...
It can be comfier, doesn't feel as cold in cold weather, doesn't rust, needs very little TLC, saying all that i agree plastic isn't the greatest thing to be put in a multitool. :)
OK, but in the Core, the plastic doesn't touch your skin--it's on the inside of the tool only. So, there is no benefit of comfort or temperature. I can't say that my Swisstools have needed any TLC either. Some of my Leathermans have, though. :P :D
Just looking at a Core now. The Zytel is used as a spacer, I can see why I think. The tool has a LOT of very large, big tools in the handles, meaning the handles need to be wide. I guess that gives you a choice of thickening the plier heads to nearly double their actual size, or using spacers.
The pliers would be unwieldy at twice the thickness, so I guess spacers are the way to go. Four sizeable chunks of steel might be heavy - and I'm guessing quite abrasive.
There's no stresses on the plastic at all, so apart from the risk of melting - I can't see a problem myself.
I've really beaten on this Core, it ain't going to break easily!
-
@DaveK said:
There's no stresses on the plastic at all, so apart from the risk of melting - I can't see a problem myself.I've really beaten on this Core, it ain't going to break easily!
Right. The melting was the only thing I was concerned with. If I was in a survival situation and dropped my tool into a fire for a few seconds, I have a problem on my hands. It is a rare possibility, but one that I would consider when buying a multi-tool w/plastic inserts vs. one without. In fact, I would probably pass up SOG for that reason also.
-
There's no stresses on the plastic at all, so apart from the risk of melting - I can't see a problem myself.
I've really beaten on this Core, it ain't going to break easily!
Right. The melting was the only thing I was concerned with. If I was in a survival situation and dropped my tool into a fire for a few seconds, I have a problem on my hands. It is a rare possibility, but one that I would consider when buying a multi-tool w/plastic inserts vs. one without. In fact, I would probably pass up SOG for that reason also.
It's a fair point - I'll give you that. I guess the same could be said of nylon washers too.
I'm curious now about how quickly or easily Zytel melts. Anyone lend me a Core?
-
I'm curious about that too. I would imagine it has a fairly high melting point.
-
Now which Zytel would that be....
http://en.wikipedia.org/wiki/Zytel
:o :D -
@Roadie said:
Now which Zytel would that be....
http://en.wikipedia.org/wiki/Zytel
:o :DI'm sure it's Zytel® HTNWRF51MP20 NC010 20% Teflon®
Right? :D :ahhh
-
I doubt it would be in this case, since it is not a structural member. I was thinking it may be teflon impregnated for the lubricity.
-
Hey Gang,
Plastics generally have a lousy coefficent of heat transfer. In plain english, that means that they heat up very slowly. Drop a kick, fuse or blast in a fire for a few seconds and you really won't see much happen.
Having engineered lots of products using plastic components and having tested them in 1200 degree F fires for up to 30 minutes, I must observe that the nay-sayers need to go and learn a bit of materials engineering.
By the way, my normal EDC Leatherman (out of the 151 that I own) is the Blast.
Have fun and please don't get so serious ;)
Best - Joe
-
I didn't think we were getting that serious... ???
When you test the plastics for heat transfer, are they layered up directly against a sheet of stainless steel? I would think that the coefficient of heat transfer of a stainless part is going to be much greater than air or another piece of plastic. What type of plastic does the Leatherman use in their design?
Could you assure me that, if I dropped a Core into the coal bed of a fire, and it took me 5 minutes to locate something to fish it out with, that the liner definitely would not melt?
Thanks for the insight.
-
-
Plastic inserts can also trap moisture behind them, leading to increased rust. At least, that seems to be the case with my Kick...
Could you post a picture of the rust you're seeing as a result of the trapped moisture?
I think I am losing my mind. I thought about it for a second and realized I had never even disassembled my Kick.

I had a little rust on the phillips shank and on the exposed inside part of the handle, but I have never even looked behind the plastic inserts. :-[
My best guess is that I was living vicariously through one of Spoonrobot's old posts.
I swear I thought I had taken it apart when I wrote that... ???
-
Ah, that's OK. Thanks for the link!
-
@NutSAK said:
Then you realize that the Swisstool was the first design with no clumping and outside opening tools, and that those two items make a world of difference. As far as I can tell, Leatherman still hasn't caught up to Victorinox on those fronts.OK, I confess, I lied. :P
I didn't realize that Victorinox had purchased Bear and Sons cutlery in the late nineties, and that's where the outside opening tools originated. :-\
Hey, you learn something new every day!
-
Every day is a school day brother ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login