HD MT
-
Everytime I have halfway forgotten abut NOKS Tools, someone brings them up.

Either stop it or reveal a source! :ahhhI do liketeh looks of those.
-
The Emerson/Multitasker EDC tools might fit your description. Mostly an Emerson folder with a couple extra tools on board.
-
For me, it's a 111mm Vic and/or Buck 110 and dedicated pliers. The Super Tool 300 might be heavy duty, but even its pliers are too weak for my uses--they've flexed, but never broke, because I know when to stop.
-
@clown said:
The Emerson/Multitasker EDC tools might fit your description. Mostly an Emerson folder with a couple extra tools on board.I was just coming in here to mention Multitasker. I don't know from experience. But I do know that they create the pliers on their tools differently than those found on SOGs, Leathermans, and most Gerber (MP1 has a different method as well) so that they are much more robust. Also, the knife on those Multitaskers are highly regarded, and in general looked at as the same level quality-wise as a high end folder
-
@cody6268 said:
For me, it's a 111mm Vic and/or Buck 110 and dedicated pliers. The Super Tool 300 might be heavy duty, but even its pliers are too weak for my uses--they've flexed, but never broke, because I know when to stop.Even comparing the best suggestions I agree.
We camped out this weekend, nothing wild about it, but my big knife made some kindling, the Mora Bushcraft did nothing but strike a ferro rod, CS Finn Wolf opened some food packaging and trimmed a pesky finger nail.....
My buddy's Wave was never opened, came out of the sheath few times to open beers using the top edge of the handle.....guess his finger nails were okay

:DTo each his own I guess, but I would take a fixed blade if I went Alone

-
I haven't seen mine yet, but I am reliably informed that the Kilamanjaro Magnus is "MASSIVE".
http://www.gearinstitute.com/hiking/multitools/item/kilimanjaro-gear-magnus-910056
/post/1124488
-
@gregozedobe said:
I haven't seen mine yet, but I am reliably informed that the Kilamanjaro Magnus is "MASSIVE".http://www.gearinstitute.com/hiking/multitools/item/kilimanjaro-gear-magnus-910056
/post/1124488
Sounds like you have one on the way, let us know your thoughts.
It's big, but is it strong?
-
Just a small update... it's no coincidence I posted those Fox-Knives, I was looking at them intensely. And ow I got FX-211 and FX-214. From the first look they look strong (well, they are still folding knives) as their "blade" is 5mm thick.
Although I have my doubts about their screwdrivers, they are very short.
-
:D
When I look at that pic I just see liner locks......so the blade could be 2.5mm and the blade and chassis will still be stronger than the lock........? -
@Gerhard Gerber said:
:D
When I look at that pic I just see liner locks......so the blade could be 2.5mm and the blade and chassis will still be stronger than the lock........?Yeah, but the lock just holds the blade in place. If you use the 2nd one for prying the stress will be on the pivot and the frame around the pivot, so the really big question is, if those parts can hold it together.
The overall length of the tool limits how much force can be applied. If it is done right, then that is how much it can withstand. -
@Gerhard Gerber said:
:D
When I look at that pic I just see liner locks......so the blade could be 2.5mm and the blade and chassis will still be stronger than the lock........?Yeah, but the lock just holds the blade in place. If you use the 2nd one for prying the stress will be on the pivot and the frame around the pivot, so the really big question is, if those parts can hold it together.
The overall length of the tool limits how much force can be applied. If it is done right, then that is how much it can withstand.And yeah... a fixed-blade is stronger.
-
@Gerhard Gerber said:
:D
When I look at that pic I just see liner locks......so the blade could be 2.5mm and the blade and chassis will still be stronger than the lock........?Yeah, but the lock just holds the blade in place. If you use the 2nd one for prying the stress will be on the pivot and the frame around the pivot, so the really big question is, if those parts can hold it together.
The overall length of the tool limits how much force can be applied. If it is done right, then that is how much it can withstand.
Valid point
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login