What Did You Use Your Multitool For Today?
-

Sent from my iPhone using Tapatalk
-
-
Surge file (diamond grit side) to rough sharpen the knife I use to strip armoured cable that was returned to me a bit blunt.

-
Flower and nail trimming

-
@Brock O Lee said:
Put up some trellis at work - used the CyberPik's in-line awl to make the pilot and then the in-line philips to drive the fixing home. Awesome!


What 91mm (?) SAK is that with the inline awl ? ???
It's a mod I did Bro-Kizzle. I have 2 now. The CyberPikachu and the Greenwood:

Question, I take it you took the awl from a pioneer ? Did you have to mod the back spring ? So basically was it an easy mod or a pain in the ass - sizzle
Sent from my iPhone using Tapatalk
-
@Brock O Lee said:
Put up some trellis at work - used the CyberPik's in-line awl to make the pilot and then the in-line philips to drive the fixing home. Awesome!


What 91mm (?) SAK is that with the inline awl ? ???
It's a mod I did Bro-Kizzle. I have 2 now. The CyberPikachu and the Greenwood:

Question, I take it you took the awl from a pioneer ? Did you have to mod the back spring ? So basically was it an easy mod or a pain in the ass - sizzle
Sent from my iPhone using Tapatalk
The awl fits in nicely without any modding really. The first one I did was the Pikachu and I popped a thin washer to take up the slack, but on the Greenwood I filed down the small blade spacer - that fits better and the opening/closing action is smoother.
With the Greenwood I only had to remove the one pin - once I'd filed the spacer the whole job was done in half an hour.
I think that sLaughterMed just dropped the awl in his brilliantly named 'Hungry Ranger' and it works fine. See his thread:
</post/1240336>
-
@Brock O Lee said:
[quote author=magentus link=topic=12238.msg1272664#msg1272664 date=1464012391]
Put up some trellis at work - used the CyberPik's in-line awl to make the pilot and then the in-line philips to drive the fixing home. Awesome!


What 91mm (?) SAK is that with the inline awl ? ???
It's a mod I did Bro-Kizzle. I have 2 now. The CyberPikachu and the Greenwood:

Question, I take it you took the awl from a pioneer ? Did you have to mod the back spring ? So basically was it an easy mod or a pain in the ass - sizzle
Sent from my iPhone using Tapatalk
The awl fits in nicely without any modding really. The first one I did was the Pikachu and I popped a thin washer to take up the slack, but on the Greenwood I filed down the small blade spacer - that fits better and the opening/closing action is smoother.
With the Greenwood I only had to remove the one pin - once I'd filed the spacer the whole job was done in half an hour.
I think that sLaughterMed just dropped the awl in his brilliantly named 'Hungry Ranger' and it works fine. See his thread:
/post/1240336
[/quote]
Awesome, thanks for finding the thread also !Sent from my iPhone using Tapatalk
-
[quote author=Brock O Lee link=topic=12238.msg1272808#msg1272808 date=1464033636]
[quote author=magentus link=topic=12238.msg1272664#msg1272664 date=1464012391]
Put up some trellis at work - used the CyberPik's in-line awl to make the pilot and then the in-line philips to drive the fixing home. Awesome!


What 91mm (?) SAK is that with the inline awl ? ???
It's a mod I did Bro-Kizzle. I have 2 now. The CyberPikachu and the Greenwood:

Question, I take it you took the awl from a pioneer ? Did you have to mod the back spring ? So basically was it an easy mod or a pain in the ass - sizzle
Sent from my iPhone using Tapatalk
The awl fits in nicely without any modding really. The first one I did was the Pikachu and I popped a thin washer to take up the slack, but on the Greenwood I filed down the small blade spacer - that fits better and the opening/closing action is smoother.
With the Greenwood I only had to remove the one pin - once I'd filed the spacer the whole job was done in half an hour.
I think that sLaughterMed just dropped the awl in his brilliantly named 'Hungry Ranger' and it works fine. See his thread:
/post/1240336
[/quote]
Awesome, thanks for finding the thread also !Sent from my iPhone using Tapatalk
[/quote]
You going for it colt? -
[quote author=magentus link=topic=12238.msg1272960#msg1272960 date=1464077825]
[quote author=Brock O Lee link=topic=12238.msg1272808#msg1272808 date=1464033636]
[quote author=magentus link=topic=12238.msg1272664#msg1272664 date=1464012391]
Put up some trellis at work - used the CyberPik's in-line awl to make the pilot and then the in-line philips to drive the fixing home. Awesome!


What 91mm (?) SAK is that with the inline awl ? ???
It's a mod I did Bro-Kizzle. I have 2 now. The CyberPikachu and the Greenwood:

Question, I take it you took the awl from a pioneer ? Did you have to mod the back spring ? So basically was it an easy mod or a pain in the ass - sizzle
Sent from my iPhone using Tapatalk
The awl fits in nicely without any modding really. The first one I did was the Pikachu and I popped a thin washer to take up the slack, but on the Greenwood I filed down the small blade spacer - that fits better and the opening/closing action is smoother.
With the Greenwood I only had to remove the one pin - once I'd filed the spacer the whole job was done in half an hour.
I think that sLaughterMed just dropped the awl in his brilliantly named 'Hungry Ranger' and it works fine. See his thread:
/post/1240336
[/quote]
Awesome, thanks for finding the thread also !Sent from my iPhone using Tapatalk
[/quote]
You going for it colt?
[/quote]
Yep, if you don't mind a clone !Sent from my iPhone using Tapatalk
-
I used the pliers on my LM Crunch to hold the cable for the front cantilever brake on my bike when I did an adjustment.
-
[quote author=colt 1911 link=topic=12238.msg1273308#msg1273308 date=1464126627]
[quote author=magentus link=topic=12238.msg1272960#msg1272960 date=1464077825]
[quote author=Brock O Lee link=topic=12238.msg1272808#msg1272808 date=1464033636]
[quote author=magentus link=topic=12238.msg1272664#msg1272664 date=1464012391]
Put up some trellis at work - used the CyberPik's in-line awl to make the pilot and then the in-line philips to drive the fixing home. Awesome!


What 91mm (?) SAK is that with the inline awl ? ???
It's a mod I did Bro-Kizzle. I have 2 now. The CyberPikachu and the Greenwood:

Question, I take it you took the awl from a pioneer ? Did you have to mod the back spring ? So basically was it an easy mod or a pain in the ass - sizzle
Sent from my iPhone using Tapatalk
The awl fits in nicely without any modding really. The first one I did was the Pikachu and I popped a thin washer to take up the slack, but on the Greenwood I filed down the small blade spacer - that fits better and the opening/closing action is smoother.
With the Greenwood I only had to remove the one pin - once I'd filed the spacer the whole job was done in half an hour.
I think that sLaughterMed just dropped the awl in his brilliantly named 'Hungry Ranger' and it works fine. See his thread:
/post/1240336
[/quote]
Awesome, thanks for finding the thread also !Sent from my iPhone using Tapatalk
[/quote]
You going for it colt?
[/quote]
Yep, if you don't mind a clone !Sent from my iPhone using Tapatalk
[/quote]
Cool! give us lots of pics.
-
This morning I cut some tough fibrous Agave leaves with my Salt, my MAXAM fixed blade and the replaceable saws from the Legend.


They worked great.

But the saw was too short, and fragile, reason why I switched over to the fixed blade

-
-
I had to tighten up a door jamb on a double door at work today. The screws are constantly backing out on this door for some reason, causing it to stick and not shut properly.
-
I used the Signal's blade for various cutting tasks while working at the house tonight. Also used the phillips driver for attaching a TV to its stand.

Sent from my SM-G920R4 using Tapatalk
-
I used my ST's file to deburr a new key that I had made for work. The blanks we have are too long and have to be trimmed down so they leave a nasty burr that will gum up the lock if you try to let it wear off. That's one thing about the Rebar I don't like, the file is too sharp for those applications and hangs on the burr rather than removing it, while the PST/Supertool/pulse files are perfect for that. Now that I think of it most of the files I've used on a lot of LM's are really good, the rebar is the only one that is too sharp.
-
I used my lm wave in combo with Topeak mini 9 to fix my punctured tire on my bike for the third time in a short period.

-
Used my supertool to remove a thorn from my sons bike tire

-
I used the Supertool's pliers to tighten a loose nut on one of the legs on our bench.

Sent from my SM-G920R4 using Tapatalk
-
Used my supertool to cut loads of fencing wire that was weaved into a hedge that we were removing.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

