Going Buck Wild.
-
@Gerhard Gerber said:
Occurred to me the other day while watching the Forgotten Weapons channel - a lot would be lost were it not for collectors.Gerhard your observation has merit and there are many collectors who see themselves as such preservationists.
Here are two that I rescued from from one owner who didn't understand it's history and another owner who was clueless about how to care for a good knife.
The first knife is Buck 102 Woodsman.I found it on ebay and it was advertised as a 105 Pathfinder.The most important feature of this knife is its inverted two line stamp.This places its birth date between 1968 and 1972.
It came to me in average condition for its age but the sheath was darn near perfect.After a few hours in the shop reconditioning the blade,hilt,handle and butt cap it looks near new.
The second Buck was advertised as very good condition but the low quality photos couldn't bear this claim to be true.I took a chance since it was a dedicated knife site.Unfortunately the seller didn't reveal the fact that someone had taken sand paper and sanded the blade from the hilt to the tip of the blade.The factory sands the blades from the spine to the edge.This non factory sanding left ugly marks that ran perpendicular to the factory finish.
It took a few hours of a combination of hand work and machine buffing, with the appropriate compounds and in the correct direction,to restore this blade to factory new condition.
-
Oh great, the intermission is over
Really like those 112 Rangers , TG -
@Marcellus said:
Oh great, the intermission is over
Really like those 112 Rangers , TGThanks Marcellus.
I have another 112 that I discovered on ebay two weeks ago.The blade was etched with "Buck Knives Since 1902".The date code indicates this was built in 1995 but the most important option this knife possesses is the nickel silver frame.During the past seven months of collecting Bucks,I've only seen about six 112's with N/S frames among the thousands of Bucks that I've viewed.I bought three of those.


-
This is a limited edition of 1,000 knives produced in 1990.It depicts a Whitetail deer in their natural environment and was etched by Buck Knives.In the fifteen years prior to this Aurum Etchings performed this work.
Buck Knife purchased Aurum Etchings and their revolutionary etching technology in 1988-1989.Aurum Etching's equipment was then installed at the Buck factory located in El Cajon,California which then allowed Buck to perform this work in-house.
-
I'm so swamped with work around our house and cabin that I haven't had enough time to take care of more important business,such as buying more Bucks.LOL
I had some time after cutting a tree and mowing the grass,so I put it to good use and snapped some pics.
The first one up is another Buck commemorative knife which celebrates Bucks 10TH anniversary at its new Idaho manufacturing facility.They used stabilized pine for the handles with star shaped imitation garnet inserts and garnet spacers.It also incorporates a nickel silver frame.
The second knife is edition number VII in the 10 knife Harley Davidson series which commemorates milestones in their history.This is only one of four that uses a nickel silver frame as apposed to a brass frame used in the other six editions.
The blade depicts Harley riders,who have formed a club and ride as a group.
-
More great additions to your collection TG. Really like that 10th Anniversary!
-
Thanks David.I waited several months to find a good deal on that model.
Here is a recent introduction by a dealer named Copper and Clad,which carries on with their series of Bucks produced using 5160 steel.
As can be seen this is a 112 Ranger with the mentioned 5160 steel and charcoal scales.
-
My older brother,who has always looked out for me,came by yesterday and brought one of his knife bags full of goodies.
He pulled out several Buck knives and asked if I wanted to buy them.My first question,of course was, how much? He then pulled out several pieces of paper which were paypal receipts and asked if I would pay what was printed on the receipts.I knew the price of the "Build Out" 110,the Custom Shop 112 and the two dot 112 but I was unsure of the other two.When I offered to buy just two since I had the other three he exclaimed this is an "all or nothing deal".
So now I'm now the proud owner of five more Buck knives,OMG.
Here is one of them before I take it into the shop and polish out the scratches and buff it to new condition.It's a Custom Shop 112 with a brass finger groove frame,redwood handles with brass pins and an S30V blade.
-
Some more nice ones tg

-
Here is the aforementioned Custom Shop Buck 112 after a spa treatment in the shop.
-
<a href="http://s441.photobucket.com/user/smcclown/media/Mobile Uploads/20160530_123757.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i441.photobucket.com/albums/qq140/smcclown/Mobile Uploads/20160530_123757.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
I do not comment much in this thread, but I love all the Buck's. Most of the knives you have shown are flat out beautiful. Thank you for sharing them with us. Makes me want to bring out my vintage Buck's, but I have not touched them since they came back from a Buck spa treatment. I have a few other Buck's I need to send in for a spa treatment and one for warranty work.
-
@captain spaulding said:
I do not comment much in this thread, but I love all the Buck's. Most of the knives you have shown are flat out beautiful. Thank you for sharing them with us. Makes me want to bring out my vintage Buck's, but I have not touched them since they came back from a Buck spa treatment. I have a few other Buck's I need to send in for a spa treatment and one for warranty work.Thank you Capt.
Praise coming from a member of your stature is much appreciated.
@Gerhard Gerber said:


Thanks Gerhard,it's always nice to receive a thank you from a man who can create a knife from raw materials.
-
This is another of the five knives I bought from my older brother.I already own this model but the deal was presented to me as an "all or nothing" purchase,so I took it.
It is a really nice and unique 110.It uses 154CM blade steel complete with a nickel silver frame,blue Dymondwood handles with a Buck anvil cut into them.
I mirror polished the spine of the blade,removed minor scratches and then buffed it to a beautiful finish.
-
Love it!!!!

-
Hi Toolguy
Growing up my favourite knives were (what I know now) Pakistani copies of the Buck 110 & co.
I have a few Bucks, but I'm not a fan of the 420J steel.
Seeing an old favourite knife pattern with blade steels I like is truly a treat

-
Thank you,from one dedicated collector to another.
@Gerhard Gerber said:
Hi Toolguy
Growing up my favourite knives were (what I know now) Pakistani copies of the Buck 110 & co.
I have a few Bucks, but I'm not a fan of the 420J steel.
Seeing an old favourite knife pattern with blade steels I like is truly a treat
Thank you Gerhard.
I'm trying to buy another 110 hunter made with the very rare ATS34 steel.This was a steel that was a favorite of one of America's greatest knife makers,Bob Loveless.
-
This one caught me eye mate, very nice.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login