And so it begins.... (My adventures into Alox!)
-
:D

Whoa a mysterious bucket of something ... exciting eh!
Yes, for me it is! This is the coolant Ive been waiting for, for my mill. If its good enough for Tesla motors machine shop, it should be ok for my SAK mods. LOL.
Its only sold through distributors, so I called one up and asked to order it. I figured it would come fedex or UPS etc, but a sales rep drove over yesterday and dropped this off. Im sure they mostly deal with big shops but I happened to be in his territory amd I sure appreciated that great service from Toronto Lube. :D
This is a 20 L pail that mixes 10:1 so it makes 200L of coolant. Seeing as I need about 10-15 Liters for my sump this should last me the rest of my natural life. It was about $250 though.
From my research it dramatically extends tool life, and helps for killer surface finish and I just didnt want to deal with other issues the cheaper coolant has, like eating paint or causing rust. So seeing as I'm going all in with this new mill I didnt want to cut corners on the coolant and just went for it.
So... ya im excited to have a pail of goo delivered. :D
The very last thing I need to do before cutting parts now is to finish sealing around the front doors so the coolant wont leak out.
-
Looking forward to the historic first cutting...
-
-
The super tinker is still holding strong as number one 3 layer mod request. :D



I am officially out of brass liners for 91s now and they will be the first part I make on my mill. I had to give myself some pressure to get on with it and get some parts made.
-
I've been swapping back and forth between the super tinker I bought from you and the Cybertool Lite you upgraded for me. Although the Cybertool is still my favorite (can't thank you enough for hand cutting those brass liners) for numerous reasons mostly related to my job, I've become very fond of that super tinker - particularly the Phillips in the back. I can understand why those tinkers would sell well.
-
I think this is the first waiter I ever built.... 84mm is a nice size, I only wish it wasnt so hard to fit all the bigger tools on this frame.


-
And here is a pretty neat explorer. No corkscrew, but a full wrench scale on back instead. I also made a cutout on the inside through the Ti and brass liner to allow nail access to open the awl. Worked out just fine. :D




-
@Syph007 said:
And here is a pretty neat explorer. No corkscrew, but a full wrench scale on back instead. I also made a cutout on the inside through the Ti and brass liner to allow nail access to open the awl. Worked out just fine. :D



I appreciate your gift for understatement, but that one is outstanding!
:ahhh -
Very nice as always

Sent from my SM-G920R4 using Tapatalk
-
Beautiful Explorer!
Add a small (and a large) serrated knife blade - and you'd have my perfect EDC.

-
Brass mag glass holder makes me happy.
-
@Syph007 said:
I think this is the first waiter I ever built.... 84mm is a nice size, I only wish it wasnt so hard to fit all the bigger tools on this frame.I agree - But you don't need to - Just get a Wenger :D - Please note MTo (Vic) SAK colleagues!!! :D :D
The Explorer is great - Although I think the brass liner behind the wrench would look better in Ti (is that even possible?) or a colour that blended in with the scale!!
Still lovin' **all **your work S007
PS. Not sure about operating the mill - But it seems like you need to be an electrical and mechanical engineer, and be up for a few improvisations (eg seal, door adjustments, hoist) just to install it. Well done mate.
Thanks for all the vids - It was like following an exciting series on the telly - Could not wait for the next episode ! -
@Huntsman said:
PS. Not sure about operating the mill - But it seems like you need to be an electrical and mechanical engineer, and be up for a few improvisations (eg seal, door adjustments, hoist) just to install it. Well done mate.
Thanks for all the vids - It was like following an exciting series on the telly - Could not wait for the next episode !Yes its for sure testing all my mechanical abilites to get it goes but I'm actually making a part finally!
91mm brass liners....
-
Ah cool, way to go! Sorry the one section to me was like bla bla, x-y drill, bla bla bla, look it fits on, bla bla bla.. But then it started to make sense, lol.. Looks good, glad your starting to get things going!
JR -
Congrats on your first part

-
So now you don't even need donor SAKs. Just make the whole thing yourself.

-
I'm wondering if this could go in the 91mm frame. Surely it could.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
