Requesting 84mm pin help!
-
Howdy,
I am going to be swapping the guts of a Walker and a Cadet. I'd very much like to use torx screws and not modify any of the original Vic parts, so I'm going with 0-80 torx low profile button head screws (rather than countersunk) and some sort of threaded tube.
Options:
I can buy 1/8" brass round standoffs, and turn them all the way down to 2.2mm. This is a "pricey" option, so I don't favor it because I think I'd like to be able to add more tools in the future, which would mean more standoffs. Plus, what if I screw up turning them down?OR, I can buy 2mm brass tube and thread it with an inexpensive tap to 0-80. The tube is cheap and should be easy to work with, but is undersized by .2mm.
OR, I can buy 3/32 rod, drill AND tap it to 0-80, then turn it down to 2.2mm. This seems like microsurgery, but I've heard of people doing it.
I suppose it may be possible to expand the 2mm tubing by pounding something through it, but I've never tried that with brass.
What's your vote? I'm hoping .2mm of undersize tubing will be a non-issue, and I can just get the 2mm tubestock.
-
Tubing is weak but as long as you have something supporting it it should work. No one that I know has any 2.2 or 2.0mm pivots.
-
Mcmaster Carr has all the stuff I'm looking at. Here's the 2mm tubing:
http://www.mcmaster.com/#catalog/122/3809/=12r270vDo you think 2mm tube would be good or bad?
-
-
If my goal was to use small stock like that to assemble a SAK, I think Id get brass or steel rod teh right size and instead of tapping it, Id thread it and make 'nuts' of some sort to thread onto the rod intead of into it. I dont know how well it would work but if would be the strongest option. 2.2mm is small to try to tap.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
