The great multitool picture thread
-
Heres todays little fix :D
One of them came out really well I think ...



Dunc
-
If anyone wants the full size version of any of my pics then just PM me you email and I will send it to you .
Dunc
-
Great pics Dunc, but I gotta admit, every time I see pictures of your nice tools laying down near that beach sand I get the heebie-jeebies. Have you ever dropped one on the beach and gotten sand in between all the blades, in every nook and cranny?
Maybe its just me....I got this thing about sand. :P
-
Yeh I have dropped them on a couple of occasions and the sound of sand in the joints makes me cringe too . But I do have access to an airline /compresser at work and the boatshed and they blow out all the crap plus they have a bath when needed . All my tools are very clean and lightly oiled , I have a thing about it , my wife says its a shame I didnt feel that way about the rest of the house ::) . Another problem is sand thats airborn in the wind , it gets everywhere :( But you do get used to it . I suppose my Spyderco Atlantic Salt gets the most abuse as I put it in the leg pocket of my drysuit which isnt water proof so it gets everything thrown at it , but it does get washed and dried after each adventure .
Dunc
-
I was sitting in the car waiting for my wife to come out of a shop and I was bored so......

Dunc
-
It seemed like a good idea to move this one down here to the new picture forum...
I hope no one minds?
Def
-
Btw, Dunc, what kind of BMW is that?
I'll bet you don't have many pics of the SwissTool under the hood of that thing! :P
Def
-
@Defender said:
I'll bet you don't have many pics of the SwissTool under the hood of that thing! :PDef
Funny you should say that ;)

Its a 1992 318se i Its done over 150,000 and did cost me quite a bit at the last MOT but she drives lovely and handles like a dream .

I've had her a couple of years and she doesnt look this good now :'(
Dunc
-
Nice machine!
My Sunfire has also looked better... I find the worst offender is other people...
I can't count the number of times I have wanted to try out my Vic Rescue Tool on the car next to me in a parking lot as a result of a new scratch or door ding on my car!
Def
-
My new Gerber Freehand.















-
Nice pics :) I'd like to have a look at one of them , they look like a good improvement . Novel idea with the tape measure .
Dunc
-
Nice pics Spoonrobot! How do you like it so far?
-
I did a little review over at the Bladeforums.com (here).
My overwhelming dislike for the ruler is fading after a few days of use.
Other than that the tool is pretty cool. Being the size it is it is fairly heavy but I have no real problem carrying it in the front pocket of my elastic-waisted Chef pants. I do like the implements and had a chance to give the pliers and philips driver a fairly thorough workout yesterday while fixing the linkage for our oven doors at work. The pliers are really big-job material so no complaints as far as strength goes. There are some heavy pressure points on the handles due to the outside folding blades but they aren't nearly as bad as on the original Leatherman Tool.
I will give complements to the philips, being situated as it is it performs better than most other multi-srewdrivers that rest against the outside of the handles. Since it rests against the inside of the handle (closer to the centerline of the handles) you don't get the infamous multi-tool wobble that you would get with most other philips drivers.
The can opener works poorly as does the bottle opener. They do work but it is not very ergonomic or as efficient as other models.
As excepted the scissors and the blades are awesome. The plain edge blade came with a very sharp toothy edge that slices extremely well and the V-style serrations on the serrated blade work wonderfully but I am curious to see how well the hold up as the edge dulls. The scissors is big, sharp and cut through thick double-ply cardboard with only a little effort. As far as the one-handed aspect goes it is hit or miss. Opening is no problem for either of the blades but closing is kind of fatiguing over time due to the height of the lock release and length of the tool. It is not the same as the Wave where you can whip out the knife, make the cut and release the lock in one smooth motion. It is more jerky and the lock release does turn your fingers into hamburger if try to use it all day one-handed.
The ruler is useful and the screwdriver tip prys well but I still feel this is a redundant item. I don't want to wait for the FliK; I want my saw now! I do plan on modding to ruler into a saw holder once I head out the Home Depot to pick up some saw blades and a few machine screws so I might have my own fix in store, we'll see.
Overall I love the aesthetics of this tool, it is really quite a step up from the old Multi-Plier 600 series but I feel there is a lot of lost usefulness here that really keeps the tool from it's full potential. With some minor changes (slightly short plier head, slightly longer base implements, saw/file/saw holder in place of ruler and it would be golden) I think this tool would make an excellent platform for other variations but that is up to Gerber.
I do love those icons for the outside tools though, awesome.
Here are some picks compared to the old Wave.



One question; as I understand it this tool came out several months ago but there is no traffic on any forums about it, why not?
-
@Spoonrobot said:
One question; as I understand it this tool came out several months ago but there is no traffic on any forums about it, why not?That was a great review
I too have noticed that Gerbers multitools dont get much mention or credit and I must admit im not a big fan but there is something about gerbers I like but an awfull lot I dont like . Its almost as if I'm waiting for them to catch up and one day they will release a tool I'm happy to EDC without having to bring a back up tool incase it fails or cant do a certain thing . I have noticed too that alot of soldiers seem to carry them in Iraq and dont complain about them but .Dunc
-
To use the ruler I found that if you only open it half way it is easier to use. Not only that but if you check the measurement from the tip to the base of the serrated blade is 41/2" (115mm) and if you half open the scissors the full measure is then 77/8" (200mm). Not precise but near enough for rough measurments.
The can opener and bottle opener are useless, I think they should have chucked both of them and designed a jig saw blade exchanger for that position, you would have had to remove the blade when you were finished cutting but that would be a small price to pay for having the use of a saw on board. I could imagine the sarcastic remarks that would be made about it though.
To close the blades pull back the lock with your finger and thumb and put the blade back using your leg, bench, wall or anything else at hand rather than you would a knife. The tool adapter for it is far better than the one for the MP600 and if you get the wrong pouch get in touch with Gerber and they will sort you out. The pouch should take both the tool set and the pliers and I have reason to think some rouge sized pouch's have got out (the one I got was clam packed the boxed one I got earlier was ok).
I too think Gerber gets a bad press, I have read thing's that just have not happened to the Gerbers I use. They do what it says on the box, they have nothing fancy about them to up the price, they are eficiant well priced tools. I can see why they seem to be trying to get into the butterfly opening multi-tool market (in conversation with 2 separate internet retailers here in the UK they said the Gerber Suspension out sells all other full size multi-tools, apparently the price is right and they look like tools) I wish they would leave them to SOG and the others and get the sliding head tools advanced more than the Freehand and Diesel. I think the Flik is going to be a marriage of those 2 designs putting the bigger tool into a Diesel size frame. Well I found the Freehand to be too loose because of the head wieght and the Diesel to not be loose enough. IMO neither beat the MP600 sliding head design (you know the one that rattles :P ).Dave
-
I went up to Tennessee to visit a friend for a few days and we took his boat out to Harrison Bay State Park on Lake Chickamauga. There was a wind advisory with the 20mph sustained and 40mph gust, so the water was choppy making for a rough ride. I had my Spirit with me so I took a pic of it with the lanyard keeping it from falling overboard on the rocking boat.

-
That Sir is a very nice pic and right up my street , think you deserve a little Karma ;)
Got any more pics of the boat etc?Dunc
-
Me, I'm just waiting for it to splash in the water. :-\
-
-
I can't bear to look at it. I've lost too many things in the water. Everything's tied down, attached to something that floats, or on my person when I'm on the water.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login