Leatherman SIDEKICK / WINGMAN Owners Club
-
Do you guys prefer Leathermans Leather or Nylon pouch for Sidekick/Wingman? I have to buy new one, 'cause I lost my Rebar Leather pouch (that I used for my Wingman) and I have never tried the Nylon one.

-
@Padre said:
Do you guys prefer Leathermans Leather or Nylon pouch for Sidekick/Wingman? I have to buy new one, 'cause I lost my Rebar Leather pouch (that I used for my Wingman) and I have never tried the Nylon one.

They ain't bad, I just hate the rip of velcro in a quiet room. But they also have the possibility of adding more.
You might try a cheap single stack mag pouch. Should hold a wingman fairly well as long as it's not too deep.
-
Nevermind, I got rid of my Wingman.
Might get one later on or try out Sidekick. -
I loved my Micra and thought I'd go bigger. Enter the Wingman.

-
I misplaced my Sidekick that my brother gave me... ended up picking up a Wingman some months later.
It's ok. I like the Sidekick better. I cant stand the partially serrated main blade. It's so hard to use compared to a razor sharp plain edge. The scissors are nice though, and the package open is AMAZING.
If I could build my own, ideal Wingkick combo, it'd basically be a Sidekick with the package opener and scissors added. I know there is no room for a saw and scissors.. but I could dream.
As it is, a Wingman with a Sidekick main blade and lanyard loop would be a step up.
I do think that my last Sidekick had wire cutters that were closer together than most... I could cut 16 or 18 gauge wire without issue.. on the Wingman, I can see daylight!
That being said, these are my first two Leathermans ever... and they DO work... and the marketing idea that these would be gateway tools to other, more expensive or simply just more LM's, is proven correct.
I'm already looking at a Skeletool CX, Micra, and Juice/Squirt to add to my rotation.
-
Hey Jason, welcome to the forum.

-
I have been learning a good deal about Leatherman MT models and having reviewed the earlier post, am I correct in understanding the Sidekick and Wingman were introduced at the same time?
I have a couple Wingman, recently acquired for a reasonable price. Only opened an employed one, (other is being held for gifting), and do like the tool set and spring action on the pliers.
However, I am confused by the price difference between the Sidekick and Wingman. I would have expected them closer, with Sidekick being lower value to match or just a few dollars more.
Any insight shared will be appreciated.
Sent from my iPhone using Tapatalk
-
@LoopCutter said:
However, I am confused by the price difference between the Sidekick and Wingman. I would have expected them closer, with Sidekick being lower value to match or just a few dollars more.Any insight shared will be appreciated.
The Sidekick is usually but not always also sold with a leather sleeve/pouch/sheath and a small carabiner clip with a 1/4" hex and bottle cap opener. That's why you typically see the Sidekick sold for about $10 USD more than the Wingman.
Even cheaper yet is the Rev... which really, has no reason to exist at all and needs to be discontinued.
-
However, I am confused by the price difference between the Sidekick and Wingman. I would have expected them closer, with Sidekick being lower value to match or just a few dollars more.
Any insight shared will be appreciated.
The Sidekick is usually but not always also** sold with a leather sleeve/pouch/sheath and a small carabiner clip with a 1/4" **hex and bottle cap opener. That's why you typically see the Sidekick sold for about $10 USD more than the Wingman.
Even cheaper yet is the Rev... which really, has no reason to exist at all and needs to be discontinued.
That's my take on it as well. Though I think someone told me you don't even get the leather sleeve any more.
-
@LoopCutter said:
I have been learning a good deal about Leatherman MT models and having reviewed the earlier post,** am I correct in understanding the Sidekick and Wingman were introduced at the same time?**I have a couple Wingman, recently acquired for a reasonable price. Only opened an employed one, (other is being held for gifting), and do like the tool set and spring action on the pliers.
However, I am confused by the price difference between the Sidekick and Wingman. I would have expected them closer, with Sidekick being lower value to match or just a few dollars more.
Any insight shared will be appreciated.
Sent from my iPhone using Tapatalk
They were indeed. :)
-
What he said :D
I guess I should ask to join
I have a Wingman but no Sidekick yet ::) I like the Wingman but wished it had a PE blade instead of the combo blade :( other than that I am very happy with it
I have had it probably since November so I have had a little time to test all the tools and see how it goes
I think LM did a good job with this tool as a budget tool especially. I have actually bought a Sidekick but never owned one :ahhh I gave it to my nephew when he graduated out of 8th grade to high school
I must have bought it in 2012 cause he just graduated high school this year :o -
My recently acquired sidekick alongside my custom bladed wingman.
Full write-up of the blade mod is in the mod squad forum: /topic/66694

-
Does anyone else really dig the main blade on the Sidekick? I love this blade.
I like it a lot better than the blade on the wingman. I'm not a fan of serrated blades to begin with and these shorter combination ones don't give you enough of either to really be useful.
I agree. The Sidekick blade is actually a very good cutter. It doesn't strike me as the most robust blade out there, but I wouldn't criticise it too much for that.
-
A few years ago I was able to pick up both a Wingman and two Sidekicks at Home Depot for $20 each. After bringing them home and playing with them for a bit, comparing them to my other MTs, I decided that while heavy and a bit limited in versatility, they would be good as dedicated tools for the vehicle gloveboxes and my workbench.
So the Sidekicks went to the gloveboxes and the Wingman sits on the workbench. Would I want to carry these regularly...no, not a chance. I prefer the Gerber Strata's and a LM Wave for dedicated belt carry on weekends when needed. Sometimes I just carry a LM Juice kf4 or s2 to complement my SAKs when needed for outdoor activities. But at the price point I got the Sidekicks and Wingman, I can comfortably dedicate them to their assigned uses knowing that they are there if needed, but never for EDC.
-
Count me in, with the recently modded Wingman!



-
Interesting. What did that pocket clip come off of, or is it a generic one? Also, does it work better than the standard one?
-
However, I am confused by the price difference between the Sidekick and Wingman. I would have expected them closer, with Sidekick being lower value to match or just a few dollars more.
Any insight shared will be appreciated.
The Sidekick is usually but not always also sold with a leather sleeve/pouch/sheath and a small carabiner clip with a 1/4" hex and bottle cap opener. That's why you typically see the Sidekick sold for about $10 USD more than the Wingman.
Even cheaper yet is the Rev... which really, has no reason to exist at all and needs to be discontinued.
Thank you, had never seen a Sidekick in a store with those two items.
I picked up REV a few months ago after a tip on another forum the HD was clear envying for under 20.
Then I stumbled upon a SuperTool 300 at the L store for less than 40, and then a Wingman for 21 at another HD in May.I like to use the tools I buy and must say, the REV did not cut it and is at home in knife box.
The ST3 is often carried, more so since I picked up a box sheath.
The Wingman is in my tool bag and I like the spring loaded pliers and scissors. So I picked up 2nd on but it still packaged for future gift.Me, the knife blade is not critical as I always have 3 1/4" blade with me in some form.
I do like a saw and a good full serrated blade, that why the ST3 finds time at work by my side.
The Sidekick to me seemed on par with the wingman, yet LM hand a different pecking order.
I am learning about these handy tools, just not a collector (yet), but am curious.
Sent from my iPhone using Tapatalk
-
New to the site, just got my wingman today! I'm hoping I can relocate the belt clip and replace the two screwdrivers with the LM bit driver. Might try to replace the file with something else as well.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login