Spirit Scissors
-
Here's one compared to the Leatherman scissors on the Blast. They may not open very much but they are powerful.

-
I didn't like the Spirits scissors to start with but they have grown on me and have always found them fine .
Dunc
-
They may be short, but they'll cut pretty much anything you put in front of them :)
-
Thanks to all of you guys!
Since everybody seems contented with the Spirit's scissors i guess I will proceed with my plan.

-
How would one go about sharpening them? ???
-
I'm guessing either a selection of jeweler's files or sandpaper. Sounds like it'd be a pain in the butt.
-
You can pry up on the spring to pop it out of its groove at the scissors end. This allows free play of the scissor blades. You can sharpen them normall this way.
Honestly, I've never had much luck at sharpening scissors....
-
For those of you who own a Spririt, were you not tempted to remove the tab of the the notch that limits the opening of the scissors?

-
No, I don't find that it limits cutting that much. Typically if you're cutting something that requires them to be opened farther than that, you shouldn't be using scissors in the first place.
They are very strong scissors. I would almost consider them mini shears.
-
If there is something you can't cut with the Spirit scissors, then you should be using dedicated scissors :D.
Carlos
-
What I dislike about the spirit scissor is because of the outward curve of the blade, it tend to push slippery materials like paracord out instead of cut them.
-
@Leatherman123 said:
How would one go about sharpening them? ???I have been using Vics scissors for 18 years and have never needed to sharpen them .
Dunc
-
While my Cybertool's scissors open slightly wider, if it's any indication of how good Vic's scissors are, the Spirit's should be fine. I've taken care of fingernails, cordage, and some small paper with my Cybertool's scissors. They are among the best I've used on any m/t yet.
-
How would one go about sharpening them? ???
I have been using Vics scissors for 18 years and have never needed to sharpen them .
Dunc
The Spirit's scissors are quite a different beast though. I've never had a need to sharpen the SAK scissors, or the ones on the Swisstool. But, I tend to use the Spirit's scissors on tougher jobs that I wouldn't use the "normal" scissors on. Therefore, I've been a bit rough on mine.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login