[GAW] Get your bike ready for summer!
-
@Gareth said:
That said I'm pretty sure that the chain shouldn't be rubbing on itself when going between the two smallest cogs, so I've taken out a couple of links to get it looking like this. Still runs up and down all the gears.As long as the chain is long enough so it doesn't lock up when you're on the big ring at the front and the big cog at the back, you're good.

-
@Gareth said:
I've also adjusted the rear breaks so as they actually line up with the rim and have looked at installing the guard for the cassette/mech.Make sure the front of the brake pad touches the rim a little before the rear (this is called toe-in and helps stop the brake from squealing) - use a piece of cardboard under the back of the pad to maintain the angle while you tighten the pad fixing nut. I think you've got the hardware on the brake the wrong way round - the nut should be behind the brake arm, and the pad should be in front. It's hard to tell, but I also think the pads are the wrong way round - one end is slightly longer than the other, this should be pointing towards the back of the bike.
-
That said I'm pretty sure that the chain shouldn't be rubbing on itself when going between the two smallest cogs, so I've taken out a couple of links to get it looking like this. Still runs up and down all the gears.
As long as the chain is long enough so it doesn't lock up when you're on the big ring at the front and the big cog at the back, you're good.

Checked that and is all good.

I've also adjusted the rear breaks so as they actually line up with the rim and have looked at installing the guard for the cassette/mech.
Make sure the front of the brake pad touches the rim a little before the rear (this is called toe-in and helps stop the brake from squealing) - use a piece of cardboard under the back of the pad to maintain the angle while you tighten the pad fixing nut. I think you've got the hardware on the brake the wrong way round - the nut should be behind the brake arm, and the pad should be in front. It's hard to tell, but I also think the pads are the wrong way round - one end is slightly longer than the other, this should be pointing towards the back of the bike.
I just had a fiddle with the alignment of the pads, so I'm not taking any blame for things being back to front. :D Thanks for the advice mate, I'll have another look and adjust it to suit.

-
Congrats to Fortytwo!
And thanks to Eth even if I didn't win... 
-
Gotta apologize, was real busy this week... Package will go out tomorrow
-
The price arrived today, with plenty of extra stuff! Thank you so much!
-
Glad it arrived safely... hope you like the Swiss Football team :D
-
For those who wonder... that is not a wooden log but the latest furniture from IKEA... not only do you have to assemble it, no, you also have to carve the pieces first

-
@Etherealicer said:
For those who wonder... that is not a wooden log but the latest furniture from IKEA... not only do you have to assemble it, no, you also have to carve the pieces first

-
lOOt!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login