And so it begins.... (My adventures into Alox!)
-
Whatever you do to fix it, better involve a SAK…[emoji3]
Will
-
I have heard the 'excited little girl' a few times in these videos ;)
And also the proud father!! :DMissed the dirty phrase the first time, second time I thought 'Well "darn it" is not too dirty' - Then I heard it :)
Good luck with the seal - Bit frustrating - >:( - Does it need somme sort of gasket?
-
lol,
well you got the little girl sound right, but I think we all have her when we get SOO excited, heck you should have heard me when I got my custom sak you made me, yours sounds nothing like mine, I think one of the neighbors asked who's girl we had over, I had to lie and say the little guy had one of his school friends over 
JR -
@MadPlumbarian said:
lol,
well you got the little girl sound right, but I think we all have her when we get SOO excited, heck you should have heard me when I got my custom sak you made me, yours sounds nothing like mine, I think one of the neighbors asked who's girl we had over, I had to lie and say the little guy had one of his school friends over 
JR
-
I won the leaking battle!
-
Congrats on another problem solved! When you start modding the equipment you use to mod, however, it starts getting a little existential...
-
@Lardlad said:
Congrats on another problem solved! When you start modding the equipment you use to mod, however, it starts getting a little existential...Ya for sure lol. I know this is still a new model for Tormach and there was bound to be some kinks in the setup, but I didnt expect to have to mod the enclosure so much. Oh well as long as I can cut Ti I will be happy.
-
Could you make a tougher combo tool?
Στάλθηκε από το YOGA Tablet 2-830F μου χρησιμοποιώντας Tapatalk
-
@Sakpan74Gr said:
Could you make a tougher combo tool?Στάλθηκε από το YOGA Tablet 2-830F μου χρησιμοποιώντας Tapatalk
Combo tool is too thin to even be strong. But I bet it's possible to grind the bottom of a bottle opener to be able to open cans.
-
And maybe turn the flat driver into a 2D Phillips in the process?
Στάλθηκε από το YOGA Tablet 2-830F μου χρησιμοποιώντας Tapatalk
-
Could you make a tougher combo tool?
Στάλθηκε από το YOGA Tablet 2-830F μου χρησιμοποιώντας Tapatalk
Combo tool is too thin to even be strong. But I bet it's possible to grind the bottom of a bottle opener to be able to open cans.
Yes I want.
-
@Lardlad said:
Congrats on another problem solved!
When you start modding the equipment you use to mod, however, it starts getting a little existential...**Dittto
That's funny **
Gotta say I have been a bit shocked by the mods you have had to make. Some of them due to pretty poor design/finishing.
Have you sent your videos to Tormach.No idea what this thing cost (dread to think :o ) - But I reckon they owe you of few hundred dollars -
- For your time - finishing their design errors
But mainly 2. For your suggestions as to how they can improve their machine - As everything you have done needs to be incorporated in the product.
Although one quick question - The lack of waterproofness was pretty poor - But why the obsession ( ;) ) with making it so watertight - Is the coolant a 'nasty' chemical that should not touch anything??
I did notice you were wearing latex gloves when you worked with itPS. As always, your attention to detail and quality is amazing - The paper test was outrageous :o
Although you missed the piece on the floor under the sump !!
- For your time - finishing their design errors
-
Congrats on another problem solved!
When you start modding the equipment you use to mod, however, it starts getting a little existential...**Dittto
That's funny **
Gotta say I have been a bit shocked by the mods you have had to make. Some of them due to pretty poor design/finishing.
Have you sent your videos to Tormach.No idea what this thing cost (dread to think :o ) - But I reckon they owe you of few hundred dollars -
- For your time - finishing their design errors
But mainly 2. For your suggestions as to how they can improve their machine - As everything you have done needs to be incorporated in the product.
Although one quick question - The lack of waterproofness was pretty poor - But why the obsession ( ;) ) with making it so watertight - Is the coolant a 'nasty' chemical that should not touch anything??
I did notice you were wearing latex gloves when you worked with itPS. As always, your attention to detail and quality is amazing - The paper test was outrageous :o
Although you missed the piece on the floor under the sump !!
Yup Tormach follows my videos and have commented to me directly so they are very aware of the design problems with the enclosure. My guess is it wasnt initially designed for flood. The 1100 enclosure was, and it doesnt leak from what I have heard. The machine/electronics/computer control have all been flawless and that is what is important to me so I really dont care too much as I expected to have to fiddle around a bit.
The support Tormach provides customers is absolutely top notch and for someone new to CNC that was THE major reason I bought from them. When I called for tech support during setup the guy that answered the phone, not transferred to, the one that answered, solved my limit switch issue in about a minute. He had personally setup this exact machine on his own so he knew all the in and outs.
I want the enclosure completely waterproof to avoid a mess in the laundry room. During rapid movements and aggressive cuts coolant goes all over the place. Its not toxic at all actually. I looked up the MSDS and its mostly petroleum distillate (oils) and a few additives. Its 7% of that concentrate in water so its mostly water with suspended oils. The worst thing in the MSDS about it was it could cause skin irritation on extended exposure.
A fellow 440 user sent me this pic of his non sealed enclosure... I dont want this mess!

- For your time - finishing their design errors
-
Great job on getting the leak solved. Now that you are ready to cut, how freaking excited are you :ahhh?
Well I can tell you I am very excited to see all the amazing things coming out of your "office" with view!
-
@Aloha007 said:
Great job on getting the leak solved. Now that you are ready to cut, how freaking excited are you :ahhh?Well I can tell you I am very excited to see all the amazing things coming out of your "office" with view!
I am SUPER excited. I have so many things to try Im not sure where to start first.
-
Idk who's more excited, you or us?
JR -
Could you make a tougher combo tool?
Στάλθηκε από το YOGA Tablet 2-830F μου χρησιμοποιώντας Tapatalk
Combo tool is too thin to even be strong. But I bet it's possible to grind the bottom of a bottle opener to be able to open cans.
I did that. The inside arc of the Opener needs to be increased somewhat, and a better point ground to grip the edge of the tin can........but it works fine.
-
Could you make a tougher combo tool?
Στάλθηκε από το YOGA Tablet 2-830F μου χρησιμοποιώντας Tapatalk
Combo tool is too thin to even be strong. But I bet it's possible to grind the bottom of a bottle opener to be able to open cans.
I did that. The inside arc of the Opener needs to be increased somewhat, and a better point ground to grip the edge of the tin can........but it works fine.
Do you have any pictures? Maybe one that compares the regular and modified ones beside each other?
-
Could you make a tougher combo tool?
Στάλθηκε από το YOGA Tablet 2-830F μου χρησιμοποιώντας Tapatalk
Combo tool is too thin to even be strong. But I bet it's possible to grind the bottom of a bottle opener to be able to open cans.
I did that. The inside arc of the Opener needs to be increased somewhat, and a better point ground to grip the edge of the tin can........but it works fine.
Thats awesome! I figured it would work but never got around to it. On 93mm SAKs like electricians people are always wanting a can opener on them and tweaking the bottle opener into a kind of can opener combo tool seemed like a good option.
-
@MadPlumbarian said:
Idk who's more excited, you or us?
JR<<<<<< That guy is SUPER EXCITED to see what comes out of that magical place in Canada.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login