And so it begins.... (My adventures into Alox!)
-
@MadPlumbarian said:
Idk who's more excited, you or us?
JR<<<<<< That guy is SUPER EXCITED to see what comes out of that magical place in Canada.
-
Idk who's more excited, you or us?
JR<<<<<< That guy is SUPER EXCITED to see what comes out of that magical place in Canada.
Well said! same with him----|
<------------------------------|
:D
JR -
Could you make a tougher combo tool?
Στάλθηκε από το YOGA Tablet 2-830F μου χρησιμοποιώντας Tapatalk
Combo tool is too thin to even be strong. But I bet it's possible to grind the bottom of a bottle opener to be able to open cans.
I did that. The inside arc of the Opener needs to be increased somewhat, and a better point ground to grip the edge of the tin can........but it works fine.
Thats awesome! I figured it would work but never got around to it. On 93mm SAKs like electricians people are always wanting a can opener on them and tweaking the bottle opener into a kind of can opener combo tool seemed like a good option.
It's much stronger than a Combo Tool, and you get a short beveled/sharpened edge that might be useful for something. It can still be used as a large flat screwdriver.
-
Idk who's more excited, you or us?
JR<<<<<< That guy is SUPER EXCITED to see what comes out of that magical place in Canada.
Well said! same with him----|
<------------------------------|
:D
JRMe too!
It's like the skunkworks has opened for business and we get to watch what it churns out.

-
Im still doing the customs too as I work on the CNC. Still got bills to pay. :D





-
Another beauty, Syph!

-
Idk who's more excited, you or us?
JR<<<<<< That guy is SUPER EXCITED to see what comes out of that magical place in Canada.
Well said! same with him----|
<------------------------------|
:D
JR
Sent from my SM-G920R4 using Tapatalk
-
@Toolslinger said:
Another beauty, Syph!
Ditto. I love those brass mag glass housings

Sent from my SM-G920R4 using Tapatalk
-
Another beauty, Syph!

Ditto. I love those brass mag glass housings

Sent from my SM-G920R4 using Tapatalk
Yet MonRouge is without one.
-
Another beauty, Syph!

Ditto. I love those brass mag glass housings

Sent from my SM-G920R4 using Tapatalk
Yet MonRouge is without one.
I know :(
Sent from my SM-G920R4 using Tapatalk
-
Another beauty, Syph!

Ditto. I love those brass mag glass housings

Sent from my SM-G920R4 using Tapatalk
Yet MonRouge is without one.
Oh, and siiiggghhh
Sent from my SM-G920R4 using Tapatalk
-
Another beauty, Syph!

Ditto. I love those brass mag glass housings

Sent from my SM-G920R4 using Tapatalk
Yet MonRouge is without one.
Oh, and siiiggghhh
Sent from my SM-G920R4 using Tapatalk

-
That's a beautiful knife. I didn't realize you could put the magnifying glass across from one of the openers...
-
-
Been a few days since I have read on this thread and am excited to see what is in store

-
@Syph007 said:
Im still doing the customs too as I work on the CNC. Still got bills to pay. :DI definitely have the intention to order you a modded SAK, they seem really well made! I'm still thinking about various things that I might figure myself before bother you asking too much questions. Something I would already enjoy since longtime is an 91mm alox, and NOT that I don't like your scales, but I would really like it with the silver original ones. I was also thinking about a last liner on one side (instead of both?) thick enough to fit the tweezers-toothpick-pen.
Is that sounds good?
(my bad English
) -
Ok after testing, needed another tweak!
-
I really like this!
*See second pic, I'm not able to put it here :-(
I wonder if it would be a good idea to shape a square hole regarding torque capability? (perpendicular sides) and also if it could handle more torque on a scale or on a tool? A sturdy one in thick titanium..
With a cardan extension, either on the square or hex side, or both, you could reach pretty much anything to tighten or loosen.


-
Today has been my best day ever with the CNC mill. No more leaks, and Ive finally mastered 2D patterning and actually getting what I am trying to!
The first one I did was a interference pattern type. I made some concentric circles overlap and hit it with a ball mill. I was super conservative and it took 10 minutes to cut and Im fine with that. :D


I am working on more patterns now and of course the traditional crosshatch.
:D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D
-
NICE! Interesting pattern..
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login