Pioneer X problems
-
Fascinating find Steve. I think it's entirely possible that the bend happens while loading the spring before peening. I ran into that problem simply trying to rebuild 91mm cellidor models in my shop. I had to build a jig to keep the pins aligned so I could load the springs up. Still turned out loose. One of these days I'll actually set up a machine shop in my garage and I'll be able to try this all again.
Curious to see where this goes though, good find!
-
After saying mine was just fine, I decided to add some drops of oil to the scissors. Well, something happened and the action started getting really heavy towards the end of the opening movement. It was somewhat sticky and stiff, almost gritty. Don't know if the spring only needed a tad bit of material to gum it up but it felt like a terrible action. All the other tools worked fine.
So I gave it a spa treatment, wd40'd it up, then gave it tumble bath in hot soapy water, and re-oiled. The scissors are back to working pretty good, the action is just a tad stiff towards the end, but much improved.
Leads me to believe Victorinox hasn't mastered the Pioneer X yet. Coincidentally, my Damascus models all are buttery smooth, hopefully they put more time and effort into those...

I think I'll wait a while before I get more Pioneer X's but hopefully we get some positive feedback from Victorinox on this.
-
I oiled mine when I got it, everything works perfect...nice sturdy ALOX pull, smooth action/snap, no play in any direction...grinds perfect. I have no complaints.
-
I put mine on ebay. The backwards nail nick just ain't gonna work for me. It didn't bother me at all until I actually got the knife. I'm so used to opening the scissors a certain way and it just doesn't feel right. No worries though, I can still build myself a custom one day. I'm planning on a single layer Alox Vic-scissor.
-
Why do I feel like we are beta testing swiza all over again......

-
I disassembled a Pioneer X today and it also had a bent centre pin. It was brand new and there were no noticeable problems with the action prior to disassembly.
-
-
Looks OK to me. I took the center pin out last so there was no stress on it when I tapped it out with a 2mm punch.
<a href="http://s289.photobucket.com/user/gigahzfemtohz/media/IMG_0996_zpsppjihqpi.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i289.photobucket.com/albums/ll211/gigahzfemtohz/IMG_0996_zpsppjihqpi.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s289.photobucket.com/user/gigahzfemtohz/media/IMG_0997_zpscpr6pyap.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i289.photobucket.com/albums/ll211/gigahzfemtohz/IMG_0997_zpscpr6pyap.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
bump
Any news on this?
-
Last I heard it was being looked in to. I will ask and see what if anything has happened :)
-
@tattoosteve99 said:
Last I heard it was being looked in to. I will ask and see what if anything has happened :)I am also anxious to hear about the issue. I have been using my Pioneer X on a daily basis for the last 2 months with no issue but since I have 3 other never used ones (including an expensive 2016 damascus one) I would like to know if I made a mistake buying all these. Please keep us posted.
-
I haven't heard anything lately. In reality they do not owe me a explanation but would be nice if they let us know. If I hear anything at all I will update
-
I got in 4 for mod work, but haven't taken them apart yet. If I notice anything I'll take pics.
-
I did take apart one today and was super careful with the middle pin so I could examine it. And it was indeed bent. Not much maybe 5 degrees.
The reason the middle pin bends and not the outer ones is the middle one bears most of the force of the backsprings. So picture a force trying to bow out that pin while the pin is been compressed and formed... makes it curve inside.
So a fix would be to have a machine that holds the springs to relieve the strain while the rivet is being rivetted.
Note that this SAK worked fine, but maybe if it was bend more it could interfere.
-
@Syph007 said:
I did take apart one today and was super careful with the middle pin so I could examine it. And it was indeed bent. Not much maybe 5 degrees.The reason the middle pin bends and not the outer ones is the middle one bears most of the force of the backsprings. So picture a force trying to bow out that pin while the pin is been compressed and formed... makes it curve inside.
So a fix would be to have a machine that holds the springs to relieve the strain while the rivet is being rivetted.
Note that this SAK worked fine, but maybe if it was bend more it could interfere.
My thoughts also. The only thing I worry about is after time the pin may continue bending and will eventually be so far out tool start loosing snap.
-
hmm, so it seems the Pioneer X is a lemon due to a design flaw in the center pin? That's disappointing.
-
@shamus said:
hmm, so it seems the Pioneer X is a lemon due to a design flaw in the center pin? That's disappointing.I forgot to also mention that the snap of it is somewhat dependent on the bent pin to be the right level of snap. When I convert to rigid pivots OMG the snap is way too much like a guillotine. In future I will probably modify the backspring to lessen that.
-
So it all depends on what you get? Whether it's pre bent or straight on what you get? Or does it not matter, it's going to bend and be a crap snapper?
JR -
@MadPlumbarian said:
So it all depends on what you get? Whether it's pre bent or straight on what you get? Or does it not matter, it's going to bend and be a crap snapper?
JRMore than likely. However I have noticed that it's getting better. Less than before. Like Syph said, it depends on where the bend is. If it's bent towards the tool=more snap, away=less snap.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
