What did you use your Leatherman for today?
-
Just used the scissors on my BO Wave to trim some long stragglers in my eyebrows....
LOL
Sorry, but no pics available!
Ha-ha!
Sent from my Nexus 6 using Tapatalk
-

I was looking through stuff to sell and found my Crater c33Tx, which I never much cared for and has therefore sat in a box for years. I thought it was a pity that the drivers are so ergonomic to use (being that the whole thing feels much more like a screwdriver than most MTs) but the knife is bad: the action is horrible, the centering is so off it rubs the carabiner, and the lock was over-traveling. I decided to sit down and take the thing apart to see if I could clean it up. The pivot spins, so a T6 bit is required to take off the clip first. Then two T8 bits to undo the pivot. I stopped there because I didn't want to deal with the backspring behind the drivers. I slid the top scale out of the way, and pushed the pivot pin down to liner lock. I cleaned and applied light Victorinox oil to the washers, blade, and launcher piece. Put it all back together, tightened everything appropriately, and the action was much improved. Some pivot adjustments later, and the centering was improved and the lockup was pushed back to about 80% with no play at all. This is the first time I've ever disassembled one of my knives, so I was very proud that it worked out! No longer is a flick required to get the blade out, the launcher thingy does the job easily. Suffice to say, this is going back in my pocket now, and not to auction.
-
I was looking through stuff to sell and found my Crater c33Tx, which I never much cared for and has therefore sat in a box for years. I thought it was a pity that the drivers are so ergonomic to use (being that the whole thing feels much more like a screwdriver than most MTs) but the knife is bad: the action is horrible, the centering is so off it rubs the carabiner, and the lock was over-traveling. I decided to sit down and take the thing apart to see if I could clean it up. The pivot spins, so a T6 bit is required to take off the clip first. Then two T8 bits to undo the pivot. I stopped there because I didn't want to deal with the backspring behind the drivers. I slid the top scale out of the way, and pushed the pivot pin down to liner lock. I cleaned and applied light Victorinox oil to the washers, blade, and launcher piece. Put it all back together, tightened everything appropriately, and the action was much improved. Some pivot adjustments later, and the centering was improved and the lockup was pushed back to about 80% with no play at all. This is the first time I've ever disassembled one of my knives, so I was very proud that it worked out! No longer is a flick required to get the blade out, the launcher thingy does the job easily. Suffice to say, this is going back in my pocket now, and not to auction.
Nice save!
-
I love my C33X in black. Wish it had the screw driver bits. Would then be perfect for here at work. I really have no use for a full on multitool. Even though I'm carrying my ST200 tonight. LOL
Sent from my Nexus 6 using Tapatalk
-
Used my ST200 to cut my bread and smoked sausage for dinner...

Sent from my Nexus 6 using Tapatalk
-
Had to use the ST200 to tighten an old nut on an old fence...

Sent from my Nexus 6 using Tapatalk
-
Used my supertool for numerous things but as usual don't get time for pics , but just used my pliers to get the last drops of superglue out of the tube

-
I cut open couple boxes with stuff we had ordered for work in them with the PE blade of my ST300

-
Quick temporary boot repair

Sent from my iPhone using Tapatalk
-
Used saw and blade to cut a nettle slashing stick to clear the footpaths of nettles and briars
-
Before

-
After

-
Way to go Weasel, is that some singletrack for the mountain biking?

-
Added a second layer of security for our windows. Cut some blocks of wood with the saw and quick filed down the edges and placed them in the windowsills.
It looks like I'm using the Herman Rebar™

-
I am ashamed to say, I used mine to cut myself this morning

I am a man down today so helped out in the workshop this morning. I had cut some double sided adhesive cushion strip tape to stick some panel labels onto a control panel in the workshop and got distracted while cleaning the sticky residue it left behind on the blade. Thankfully its not deep but it bled well. That'll look really good in the accident book today. Yes I am a numpty and everyone is making sure I know it. I will now stay in my office the rest of the day so I can't hurt myself >:(
-
Way to go Weasel, is that some singletrack for the mountain biking?

It's a local footpath that only gets maintained by me, I ride and walk with my kids on there that's why I keep the nettles down
Good on you for maintaining the trail.

Cheers buddy , I enjoy it and my 5 year old boy likes helping too, my next project is some kind of trailed mower for my bike as the grass never gets cut either
-
Mine got put to good use helping my mum out today, and without cutting myself to.
I used it to cut the side sheeting for her little greenhouse, awl to punch all the holes for the screws, and used the file to sharpen her loppers, hoe and weeding knife. Very productive afternoon.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
