Leatherman SIDEKICK / WINGMAN Owners Club
-
Can I join?

-
@matt31084 said:
New to the site, just got my wingman today! I'm hoping I can relocate the belt clip and replace the two screwdrivers with the LM bit driver. Might try to replace the file with something else as well.Welcome to the forum Matt.
Sounds like a good modification there, we'll need to see some pics when it's done. 
-
@sLaughterMed said:
Can I join?

Does half a MT give you half a membership?
I still really like these mods and can't believe that LM themselves haven't started doing them themselves. I'm never going to buy a Rev, but I would be tempted by one of these. -
@sLaughterMed said:
Can I join?

I love the Sidekick knife mod

-
New to the site, just got my wingman today! I'm hoping I can relocate the belt clip and replace the two screwdrivers with the LM bit driver. Might try to replace the file with something else as well.
Welcome to the forum Matt.
Sounds like a good modification there, we'll need to see some pics when it's done. 
Welcome to the forum Matt
+1 on the pics when you finish your mod 
-
@sLaughterMed said:
Can I join?

Wild! It's awesome. Kinda like a leatherman SAK.
-
@Dan B said:
Interesting. What did that pocket clip come off of, or is it a generic one? Also, does it work better than the standard one?The clip was from a cheap Karambit folder.

It works better than the standard one (for my uses and preferences) because it is deeper carry, and I have less people bother me about what's in my pocket.


When on the beach, for instance (my swimsuit is black and the clip doesn't shine and reveal the tool)

-
Uuuuhhh

-
Sorry buddy hope you can get that clip situated

-
Sorry buddy hope you can get that clip situated

It's constantly popping out. It moves about once a day.
Can't wait to switch back to a Wave.
I bet loc-tite on that pivot would help. Also, perhaps bend the divot on the clip a little farther downward into the knife.
-
Sorry buddy hope you can get that clip situated

It's constantly popping out. It moves about once a day.
Can't wait to switch back to a Wave.
I bet loc-tite on that pivot would help. Also, perhaps bend the divot on the clip a little farther downward into the knife.
Done and Done
This is the only Leatherman I have actually lost. Went back to the furniture store and found the couch it was in. After that I removed the clip, added super glue, loctite, and bent the retainer down while also bending the clip as to make it hold better.
Even so the placement makes no sense!!
-
Sorry buddy hope you can get that clip situated

It's constantly popping out. It moves about once a day.
Can't wait to switch back to a Wave.
I bet loc-tite on that pivot would help. Also, perhaps bend the divot on the clip a little farther downward into the knife.
Done and Done
This is the only Leatherman I have actually lost. Went back to the furniture store and found the couch it was in. After that I removed the clip, added super glue, loctite, and bent the retainer down while also bending the clip as to make it hold better.
Even so the placement makes no sense!!
It does if you carry it on the left, and carry a SAK on the right
-
[quote author=Poncho65 link=topic=32239.msg1293567#msg1293567 date=1467252726]
Sorry buddy hope you can get that clip situated
It's constantly popping out. It moves about once a day.
Can't wait to switch back to a Wave.
I bet loc-tite on that pivot would help. Also, perhaps bend the divot on the clip a little farther downward into the knife.
Done and Done
This is the only Leatherman I have actually lost. Went back to the furniture store and found the couch it was in. After that I removed the clip, added super glue, loctite, and bent the retainer down while also bending the clip as to make it hold better.
Even so the placement makes no sense!!
It does if you carry it on the left, and carry a SAK on the right
[/quote]
Not falling for that one [emoji14] -
[quote author=NKlamerus link=topic=32239.msg1293576#msg1293576 date=1467253961]
[quote author=Poncho65 link=topic=32239.msg1293567#msg1293567 date=1467252726]
Sorry buddy hope you can get that clip situated
It's constantly popping out. It moves about once a day.
Can't wait to switch back to a Wave.
I bet loc-tite on that pivot would help. Also, perhaps bend the divot on the clip a little farther downward into the knife.
Done and Done
This is the only Leatherman I have actually lost. Went back to the furniture store and found the couch it was in. After that I removed the clip, added super glue, loctite, and bent the retainer down while also bending the clip as to make it hold better.
Even so the placement makes no sense!!
It does if you carry it on the left, and carry a SAK on the right
[/quote]
Not falling for that one [emoji14]
[/quote]
Oh come on.... a Climber pairs nicely with a Sidekick, and a Camper with a Wingman
-
[quote author=sLaughterMed link=topic=32239.msg1293579#msg1293579 date=1467254163]
[quote author=NKlamerus link=topic=32239.msg1293576#msg1293576 date=1467253961]
[quote author=Poncho65 link=topic=32239.msg1293567#msg1293567 date=1467252726]
Sorry buddy hope you can get that clip situated
It's constantly popping out. It moves about once a day.
Can't wait to switch back to a Wave.
I bet loc-tite on that pivot would help. Also, perhaps bend the divot on the clip a little farther downward into the knife.
Done and Done
This is the only Leatherman I have actually lost. Went back to the furniture store and found the couch it was in. After that I removed the clip, added super glue, loctite, and bent the retainer down while also bending the clip as to make it hold better.
Even so the placement makes no sense!!
It does if you carry it on the left, and carry a SAK on the right
[/quote]
Not falling for that one [emoji14]
[/quote]
Oh come on.... a Climber pairs nicely with a Sidekick, and a Camper with a Wingman
[/quote]It's true everyone knows that you need a SAK in your pocket and a LM either on your belt or clip in your pocket, rather common knowledge

-
@matt31084 said:
New to the site, just got my wingman today! I'm hoping I can relocate the belt clip and replace the two screwdrivers with the LM bit driver. Might try to replace the file with something else as well.Welcome, matt!
I did the clip switch. It's not too hard. Here is the write-up:
/post/1286449
The one additional thing that I'll say is that drilling the hole goes easier if you have some way of supporting the tool from the inside.
Oh, and please let us see the results when you're done!
-
@NKlamerus said:
Uuuuhhh
My Sidekick did this when new. I removed the clip, bent the alignment tab dealy thing down, then reattached and tightened the screw accordingly, so it was snug, but did not make the tools held by that screw too tight to open. Never loosened or came off again.
Until I misplaced the entire tool.
My Wingman has not been a problem at all.
-
Uuuuhhh

My Sidekick did this when new. I removed the clip, bent the alignment tab dealy thing down, then reattached and tightened the screw accordingly, so it was snug, but did not make the tools held by that screw too tight to open. Never loosened or came off again.
Until I misplaced the entire tool.
My Wingman has not been a problem at all.
Bad deal about the Sidekick :-\ At least you still have the Wingman though

-
Oh and welcome to
JasonJ 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login