And so it begins.... (My adventures into Alox!)
-
Heres a thought. What about a set of 91mm scales with 2.5mm holes, specifically for using stock parts, and exposed rivets? Bonus points for optional pocket clip and scale tools

-
@sLaughterMed said:
Heres a thought. What about a set of 91mm scales with 2.5mm holes, specifically for using stock parts, and exposed rivets? Bonus points for optional pocket clip and scale tools
Oh to sell as a DIY build your own mod? Thats totally doable.
-
@sLaughterMed said:
Heres a thought. What about a set of 91mm scales with 2.5mm holes, specifically for using stock parts, and exposed rivets? Bonus points for optional pocket clip and scale tools
@Syph007 said:
Oh to sell as a DIY build your own mod? Thats totally doable.Sometimes it's embarrassing not to master enough English to fully understand.
You mean receiving scales, pivots and screws fitting for 91mm to self assemble the knife? I buy that today! I would mostly like to try various layouts with the tools I know I want. And learn more about the machinery inside :-)
-
I was wondering what about modding the tools for example put an awl into 84mm frame. Can you use the machine to cut out into the size or it needs to be done by hand?
Sent from my E6653 using Tapatalk
-
@Glofindel said:
I was wondering what about modding the tools for example put an awl into 84mm frame. Can you use the machine to cut out into the size or it needs to be done by hand?Sent from my E6653 using Tapatalk
I can cut hardened steels but it would really wear out the bits fast. I saw one maker who tried heat treating the knife blanks first then machining them to finish them up and while it worked I think it was not good in the long run. It is something I will try though. The first blades I make will be from the piece of damasteel I bought ages ago. Im going to make a fixture to hold the blanks at the proper angle then machine off a plane on each side to form the blade. Basically a full flat grind but machined off.
Heres a thought. What about a set of 91mm scales with 2.5mm holes, specifically for using stock parts, and exposed rivets? Bonus points for optional pocket clip and scale tools

@Syph007 said:
Oh to sell as a DIY build your own mod? Thats totally doable.Sometimes it's embarrassing not to master enough English to fully understand.
You mean receiving scales, pivots and screws fitting for 91mm to self assemble the knife? I buy that today! I would mostly like to try various layouts with the tools I know I want. And learn more about the machinery inside :-)
It would only work for the guys that want to rivet as all the internals need to be modified and pivots created of exact length. But I could sell a set of Ti scales and pin stock with it long enough to assemble up to a swiss champ size.
Im working today on getting the edge round over perfect. Ive milled the front and back faces no problem and the edges all the way around so the last part is the round over. Seemed simple to program but Im using a ball mill with 0.002 paths and somehow I keep getting a concave instead of convex, so Im doing somethign wrong. Thats the last operation I need to learn though before I can build pallets and run these in batches. Having it hands off means I can have the machine producing these while I go so other work.

-
I've seen most blade makers grind the profiles and bevels first. Then after heat treat they finish it up. I think this is the best method by far.
-
@tattoosteve99 said:
I've seen most blade makers grind the profiles and bevels first. Then after heat treat they finish it up. I think this is the best method by far.Grinding doesnt make a huge difference, you can grind hardened steel just fine expecially with modern ceramic belts. Some people have steel rectangles heat treated then grind them into blades. Its nice and simple that way as you dont have to grind them twice and you never get warps.
Im talking about producing a blade without using a grinder at all though. All machined. A grinder would only be needed to put an edge on at the very end. Machining hardened steels is much harder than grinding so I think Id have to do it in 2 stages. Or one stage and finished on a grinder. I found a canadian source for KMG grinders now so that is on my list.
-
I nailed the round over for the edges. :D Oh yep that is copper in the cross!


-
She's a beauty!
JR -
Wow! That looks awesome [emoji1303]
Sent from my electronic multi-tool.
-
Nicely done!
-
@MadPlumbarian said:
She's a beauty!
JR@Syph007 said:
I nailed the round over for the edges. :D Oh yep that is copper in the cross!

- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Now this... this I like! Solid copper cross, but I skipped the texture on that part and machined it perfectly even with the top of the texture. This one is a winner and I will offer this and brass variant as standard scales. :D

-
Now this... this I like! Solid copper cross, but I skipped the texture on that part and machined it perfectly even with the top of the texture. This one is a winner and I will offer this and brass variant as standard scales. :D

Bah the picture is not working for me.
Sigh.
Hmm might be photobucket. I'll attach it.

-
Looks like you nailed it Syph.
-
-
Sounds great. Can't wait to see.
-
Looks like you nailed it Syph.
Im quite happy for sure. I'll do a brass one next for comparison.
And now that Ive got this machine... Im thinking why not cut tweezers and toothpicks from Ti as well. I dont see a problem cutting one piece Ti tweezers. Too many things to try :ahhh
Ti T&T would be cool indeed

Sent from my SM-G920R4 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login