SAK scales
-
@hiraethus said:
50% of a small amount isn't very much (about 13 grams in weight and 0.01 litres in volume, I reckon). I do hope you've already cut the labels out of your underwear and sawn your toothbrush in half.
-
50% of a small amount isn't very much (about 13 grams in weight and 0.01 litres in volume, I reckon). I do hope you've already cut the labels out of your underwear and sawn your toothbrush in half.


-
An interesting thread and some excellent replies. I've never considered removing the scales from any of my knives however I can see the merits of doing so in certain circumstances. Thanks for starting the thread.
-
Might be rather late to weigh in on this topic but here's my 2 cents worth... While I can understand the rationale for wanting to miminise bulk, I am not for the idea if it involves a SAK.
As we all know, the SAK has gone through several improvements over the past century that its current form-factor, I believe, should be very near perfection, and that every single feature is there for a good reason. During my prepper days, I did extensive research online, analysing what others put into their PSK/BOB. And I am happy to report to my fellow SAK enthusiasts here that the SAK is quite a popular item in PSKs, ranging from Swisschamps in Pelican cases, to Farmers in altoids tins, to Classic SDs in small fishing kits. Never have I seen the SAK scales removed for the sake of reducing bulk. Not even for those who try to cram every single useful item into an altoids tin. They may shorten straws/matchsticks to impractical lengths, or imclude the tiniest fish hooks/weights/ferocium rods, but they always leave the SAK intact.
-
@red_rider_1979 said:
Might be rather late to weigh in on this topic but here's my 2 cents worth... While I can understand the rationale for wanting to miminise bulk, I am not for the idea if it involves a SAK.As we all know, the SAK has gone through several improvements over the past century that its current form-factor, I believe, should be very near perfection, and that every single feature is there for a good reason. During my prepper days, I did extensive research online, analysing what others put into their PSK/BOB. And I am happy to report to my fellow SAK enthusiasts here that the SAK is quite a popular item in PSKs, ranging from Swisschamps in Pelican cases, to Farmers in altoids tins, to Classic SDs in small fishing kits. Never have I seen the SAK scales removed for the sake of reducing bulk. Not even for those who try to cram every single useful item into an altoids tin. They may shorten straws/matchsticks to impractical lengths, or imclude the tiniest fish hooks/weights/ferocium rods, but they always leave the SAK intact.
Here here, I'll toast to that [emoji482]
Sent from my electronic multi-tool.
-
@red_rider_1979 said:
Might be rather late to weigh in on this topic but here's my 2 cents worth... While I can understand the rationale for wanting to miminise bulk, I am not for the idea if it involves a SAK.As we all know, the SAK has gone through several improvements over the past century that its current form-factor, I believe, should be very near perfection, and that every single feature is there for a good reason. During my prepper days, I did extensive research online, analysing what others put into their PSK/BOB. And I am happy to report to my fellow SAK enthusiasts here that the SAK is quite a popular item in PSKs, ranging from Swisschamps in Pelican cases, to Farmers in altoids tins, to Classic SDs in small fishing kits. Never have I seen the SAK scales removed for the sake of reducing bulk. Not even for those who try to cram every single useful item into an altoids tin. They may shorten straws/matchsticks to impractical lengths, or imclude the tiniest fish hooks/weights/ferocium rods, but they always leave the SAK intact.
Well, in the opinion of someone who has removed the scales, the knife works just as well as before and while it would be mildly uncomfortable if you were to carve away for an hour at a piece of wood or screw or unscrew, hundreds of screws in a single sitting that'd still just be mild discomfit.
If you're not overly concerned with the toothpick and tweezers and want to minimise some more bulk without going to any effort or expense, it's not such a bad notion.
If, however, the thought of a scaleless SAK puts fear in your soul, I'd advise you to leave them on. :) -
The scales protect my pocket (and skin in below that pocket) from the sharpish metal edges, and also makes it possible to use a slip sheath to protect the knife from filling with pocket lint. As well as all the other functions already mentioned.
I think popping of the scales is mostly useful if you need to sterilize the knife, not for weight savings.
-
Might be rather late to weigh in on this topic but here's my 2 cents worth... While I can understand the rationale for wanting to miminise bulk, I am not for the idea if it involves a SAK.
As we all know, the SAK has gone through several improvements over the past century that its current form-factor, I believe, should be very near perfection, and that every single feature is there for a good reason. During my prepper days, I did extensive research online, analysing what others put into their PSK/BOB. And I am happy to report to my fellow SAK enthusiasts here that the SAK is quite a popular item in PSKs, ranging from Swisschamps in Pelican cases, to Farmers in altoids tins, to Classic SDs in small fishing kits. Never have I seen the SAK scales removed for the sake of reducing bulk. Not even for those who try to cram every single useful item into an altoids tin. They may shorten straws/matchsticks to impractical lengths, or imclude the tiniest fish hooks/weights/ferocium rods, but they always leave the SAK intact.
Well, in the opinion of someone who has removed the scales, the knife works just as well as before and while it would be mildly uncomfortable if you were to carve away for an hour at a piece of wood or screw or unscrew, hundreds of screws in a single sitting that'd still just be mild discomfit.
If you're not overly concerned with the toothpick and tweezers and want to minimise some more bulk without going to any effort or expense, it's not such a bad notion.
If, however, the thought of a scaleless SAK puts fear in your soul, I'd advise you to leave them on. :)
Cab, ya gotta understand where some of the responses are coming from. No disrespect was intended but it's like you posted in the Porsche Collectors forum that you took off your 911 Turbo's front fenders because you were cutting the weight to improve performance. The loyal, longtime Porsche owners don't understand why you would mess with the pinnacle of perfection for such a minimal gain. It's all perspective. We salute you for your testing and experimentation even though we may reject the premise! Congrats on a successful endeavor that achieved your desired results!!

-
The 911 turbo, hmm...
I would take the goofy whale tail off, but that's just me. :P
-
I've always thought Porsche made pretty unattractive cars so perhaps not the best example.
-
I've always thought Porsche made pretty unattractive cars so perhaps not the best example
And yet you take his meaning.
I wish to take nothing from anybody, neither their scales nor their opinions.
In a slightly more serious vein... I have made that point in this thread before. It comes as no surprise that fans of the SAK, of which I am one, might be alarmed at such a desecration.
That being said, it's not quite the same as burning a flag or holy book (or even an expensive, if hideous, car) is it? -
I've always thought Porsche made pretty unattractive cars so perhaps not the best example
And yet you take his meaning.
I wish to take nothing from anybody, neither their scales nor their opinions.
In a slightly more serious vein... I have made that point in this thread before. It comes as no surprise that fans of the SAK, of which I am one, might be alarmed at such a desecration.
That being said, it's not quite the same as burning a flag or holy book (or even an expensive, if hideous, car) is it?Burning a flag or religious text would be done to make some kind of statement or another, I'd assume. burning an expensive car would mostly make the statement "I have way more money than sense." Removing the scales from a SAK doesn't do much aside from making it less comfortable to use and possibly endangering the fabric lining your pocket. I'm not personally bothered by someone doing any of these things, but I find it interesting that you seem to be enjoying that some people might be.
Use your tools as you please. But you might want to refine your sense of humor a tad, because it's unnecessarily bulky and obtuse. -
In my experience removing the scales doesn't make the knife uncomfortable, unless you were to use it for a long time. It certainly doesn't cut through fabric, the pins or rivets, or whatever, aren't sharp.
My humour, flawed as it may be, shan't be altered as my knife has been. That's not to say that I don't welcome any suggestions on the topic :)
-
You never know when you'll have to use the knife for a protracted little while, though.
Given time, I'm sure the exposed rivets and liners can cause tear to the fabric surrounding them, especially if they're always touching the same spots. I suppose they could even become sharper with time.
-
I've always thought Porsche made pretty unattractive cars so perhaps not the best example
And yet you take his meaning.
I wish to take nothing from anybody, neither their scales nor their opinions.
In a slightly more serious vein... I have made that point in this thread before. It comes as no surprise that fans of the SAK, of which I am one, might be alarmed at such a desecration.
That being said, it's not quite the same as burning a flag or holy book (or even an expensive, if hideous, car) is it?Burning a flag or religious text would be done to make some kind of statement or another, I'd assume. burning an expensive car would mostly make the statement "I have way more money than sense." Removing the scales from a SAK doesn't do much aside from making it less comfortable to use and possibly endangering the fabric lining your pocket. I'm not personally bothered by someone doing any of these things, but I find it interesting that you seem to be enjoying that some people might be.
Use your tools as you please. But you might want to refine your sense of humor a tad, because it's unnecessarily bulky and obtuse.Yeah, that's MY job around here! You don't need no more obtusiness... obtusesess... obtusiessness... that!

-
@firiki said:
You never know when you'll have to use the knife for a protracted little while, though.Given time, I'm sure the exposed rivets and liners can cause tear to the fabric surrounding them, especially if they're always touching the same spots. I suppose they could even become sharper with time.
Adding yet *another *function to the knife! See, he was right all along!
:ahhh :ahhh :ahhh :ahhh
-
You never know when you'll have to use the knife for a protracted little while, though.
Given time, I'm sure the exposed rivets and liners can cause tear to the fabric surrounding them, especially if they're always touching the same spots. I suppose they could even become sharper with time.
Adding yet *another *function to the knife! See, he was right all along!
:ahhh :ahhh :ahhh :ahhh
Surely no right minded individual was ever in any doubt of that?
-
Personally I don't care for the ideal. The only situation I see where "bulk" may be an issue is if the knife is going to be packed in a container. If that were the case, I would take it a step further and re-peen the pins without the bushings.

-
I have an old Chinese SAK knockoff for WindRiver. The scales came off years ago. It works fine without it.
@ Cabbage, have you done the hike yet?
Sent from my XT1563 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login