And so it begins.... (My adventures into Alox!)
-
You now, Bob - the beautiful brass holder you've designed for the mag glass is one of the main reasons I want you to do a knife for me. Started at a new job recently, and have to read alot of small numbers on many items. A pocket knife with a good magnifier would be a real blessing.

-
@tankerG said:
You now, Bob - the beautiful brass holder you've designed for the mag glass is one of the main reasons I want you to do a knife for me. Started at a new job recently, and have to read alot of small numbers on many items. A pocket knife with a good magnifier would be a real blessing.
I hear you on that. The older I get the more often I find writing seems to be getting smaller. :D I hope of have some fancier brass mag glasses to show off in a couple of days
Today I finished up the fixture plate I needed for the scales.
-
I find myself eating a lot of popcorn in this thread :o


-
SO with all this amazing stuff going on and I recall you speaking of some damasteel you had........... Do you see yourself making blades for SAKs? Like 154cm or S30V for example?
I can only imagine you not getting sleep due to all the possibilities of what you can do now.
-
@Aloha007 said:
SO with all this amazing stuff going on and I recall you speaking of some damasteel you had........... Do you see yourself making blades for SAKs? Like 154cm or S30V for example?I can only imagine you not getting sleep due to all the possibilities of what you can do now.
Yes for sure. I've been researching and I'm going with CPM154. Great steel and pretty afforable. I belive I can make fixtures to blank the blades out and do the majority of the stock removal. Personally I want some full flat grind wharncliff baldes.
-
SO with all this amazing stuff going on and I recall you speaking of some damasteel you had........... Do you see yourself making blades for SAKs? Like 154cm or S30V for example?
I can only imagine you not getting sleep due to all the possibilities of what you can do now.
Yes for sure. I've been researching and I'm going with CPM154. Great steel and pretty afforable. I belive I can make fixtures to blank the blades out and do the majority of the stock removal. Personally I want some full flat grind wharncliff baldes.
:o that would be amazing! CPM154 sounds like a great choice. S30V is hard work to sharpen and seems like overkill for an SAK.
Will you be selling just the bare blades? And will you be able to do them with standard 3mm pivot holes rather than the 1/8" that you use? -
SO with all this amazing stuff going on and I recall you speaking of some damasteel you had........... Do you see yourself making blades for SAKs? Like 154cm or S30V for example?
I can only imagine you not getting sleep due to all the possibilities of what you can do now.
Yes for sure. I've been researching and I'm going with CPM154. Great steel and pretty afforable. I belive I can make fixtures to blank the blades out and do the majority of the stock removal. Personally I want some full flat grind wharncliff baldes.
:o that would be amazing! CPM154 sounds like a great choice. S30V is hard work to sharpen and seems like overkill for an SAK.
Will you be selling just the bare blades? And will you be able to do them with standard 3mm pivot holes rather than the 1/8" that you use?From the place I buy it.
"CPM 154 is the good stuff. It has excellent edge retention, fine, evenly distriuted carbides, great stain resistance and is twice as tough as regular 154CM at the same hardness. This allows for thinner blades and edge geometry which results in better cutting. As a bonus, it takes a better mirror finish than any other blade steel we know of. "
I have to learn to heat treat it and then I can make whatever people want. The idea of a custom tool for me is about being as flexible as possible as really that is the value I think in getting something custom.
-
SO with all this amazing stuff going on and I recall you speaking of some damasteel you had........... Do you see yourself making blades for SAKs? Like 154cm or S30V for example?
I can only imagine you not getting sleep due to all the possibilities of what you can do now.
Yes for sure. I've been researching and I'm going with CPM154. Great steel and pretty afforable. I belive I can make fixtures to blank the blades out and do the majority of the stock removal. Personally I want some full flat grind wharncliff baldes.
Is there a possibility for clip point blades?
Sent from my iPhone using Tapatalk
-
SO with all this amazing stuff going on and I recall you speaking of some damasteel you had........... Do you see yourself making blades for SAKs? Like 154cm or S30V for example?
I can only imagine you not getting sleep due to all the possibilities of what you can do now.
Yes for sure. I've been researching and I'm going with CPM154. Great steel and pretty afforable. I belive I can make fixtures to blank the blades out and do the majority of the stock removal. Personally I want some full flat grind wharncliff baldes.
Is there a possibility for clip point blades?
Sent from my iPhone using Tapatalk
Yep, Ive been debating the pros and cons of the different shapes and I know the clip point is the more traditional north american pocket knife style. A tanto or reverse tanto is also something Im interested in as it very functional as a utility knife.
-
:ahhh All of this sounds better an better each time I come to this thread


-
So, you are basically "tiling the plane" on the scales. Which brings to my mind the great tessellation etchings of M.C. Escher, which are still under copyright, unfortunately. But you could create your own!
-
Its pretty hard to tell but the cross on this one is mokume.






-
Enhanced for detail...
-
Its pretty hard to tell but the cross on this one is mokume.






Looks coppery.
Is that a word?
It's a perfectly cromulent word to use.
-
So, you are basically "tiling the plane" on the scales. Which brings to my mind the great tessellation etchings of M.C. Escher, which are still under copyright, unfortunately. But you could create your own!
I had to look that up but those do look awesome.
+1
Gotta luv

I keep learning about the most diverse things. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

