What did you use your Leatherman for today?
-
Used my Wave to fasten a screw with damaged grooves (is this a correct expression?) on a floor lamp. Which we are hoping to sell (and get rid of!) soon :D
-
@Alan K. said:
I used the ST300 for sewing heavy grade nylon to modify a machete scabbard to fit a different machete than it came with, and while I had the sewing kit out I also made a leather key fob. Even though I was mostly using the ST300 to push the needle through one side of these materials and pull it out the other, my fingers are still sore. I was so engrossed in the task that I neglected to take pictures for the super tool challenge.

Well take a picture of your fingers instead and show us your work.
Sent from my SM-T350 using Tapatalk
-
ST300 with saw blade prepped some sticks for fire bowl -

Sent from my iPhone using Tapatalk
-
@LoopCutter said:
ST300 with saw blade prepped some sticks for fire bowl
I've just done the same with my surge ready for lighting my chiminea later tonight 
-
Tightening a door knob screw...nothing exciting.

Sent from my Nexus 6 using Tapatalk
-
Just fixed my gf's window blind that had a missing chain for aeons. We found the chain in a long forgotten box earlier today, so it was time for me to take action with my LM Wave. Well, the LM did the job as expectede and I was hero of the day :D

-
Yesterday I used the can opener on my Rebar to dig an o-ring out of it's groove in a pressure washer wand. I replaced the o-ring so it would stop leaking all over me while I used it. People knock the can opener, but I use the hell out of mine for a ton of different things.
-
Used my modded BN fuse to dismantle the SOG PPP rivets and then cannibalise it to make this half SOG half LM hybrid


Then used the PPP to unrivet the LM, and put the pieces in

-
Used my Wave to fix my ex's notebook today

-
@Alan K. said:
I used the ST300 for sewing heavy grade nylon to modify a machete scabbard to fit a different machete than it came with, and while I had the sewing kit out I also made a leather key fob. Even though I was mostly using the ST300 to push the needle through one side of these materials and pull it out the other, my fingers are still sore. I was so engrossed in the task that I neglected to take pictures for the super tool challenge.

Well take a picture of your fingers instead and show us your work.
Sent from my SM-T350 using Tapatalk
Here's the completed modified machete sheath. Note the stitching fore and aft. The sheath opened on the side to accommodate a Kukri shaped blade and was about 4 inches too long. I fixed it to better fit the 12 inch Tramontina.
-
@Alan K. said:
@Alan K. said:
I used the ST300 for sewing heavy grade nylon to modify a machete scabbard to fit a different machete than it came with, and while I had the sewing kit out I also made a leather key fob. Even though I was mostly using the ST300 to push the needle through one side of these materials and pull it out the other, my fingers are still sore. I was so engrossed in the task that I neglected to take pictures for the super tool challenge.

Well take a picture of your fingers instead and show us your work.
Sent from my SM-T350 using Tapatalk
Here's the completed modified machete sheath. Note the stitching fore and aft. The sheath opened on the side to accommodate a Kukri shaped blade and was about 4 inches too long. I fixed it to better fit the 12 inch Tramontina.
That will do the job. [emoji1319][emoji1319]
-
Opened a Pepsi bottle with Micra

Dream. Wish. Leave nothing undone. Repeat.
-
Used my ST300 to grip a spare Skeletool pocket clip so I could drill it out.
I am fitting it to a 2004 made PST I just got...


Sent from my Nexus 6 using Tapatalk
-
Used the flathead on my new s4 to clear a jam in my ar15 at the range today
Sent from my Z987 using Tapatalk
-
Just doing my day to day job. Leatherman did some overtime today. Broke the bit but. Have got enough spare ones at home.
-
Sideclip and bit adapter disassembling a table

-
Quick way of changing a serpentine belt on an engine.
Cut the old one off (easy-10 seconds)And fit new one. (3 hours later)
-
One of the suicide doors on my extended cab f150 would not open, bad cable was most likely culprit.
So out came the ST300 I'm carrying every day for this month's challenge. But with no bit driver, I couldn't do much.
So out came the Wave. I had ground down an old bit driver to fit in the bit holder. It got lots of use. Only a pic or two as I was just too busy to take pics.
Several minutes and a few wire ties later, the door works again...



Sent from my Nexus 6 using Tapatalk
-
You need to get a LM bit adapter to go over the square Phillips that way you can use a bit kit with it
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
