Surge tool arrangement
-
Welcome to the forum Markof

You have came to the right place to ask anything multitool wise :D
Wonder where LM123 is you usually can't get Surge typed out before he chimes in about it ::) :DI don't actually own a Surge but I have plenty of LMs and they are all tough tools ;) :D
-
My Surge is dated 0307 and looks just like yours - it's cool 8)
I'm surprised that the pliers are damaged, as they are generally as tough as anything you'll find, the Surge is a heavy duty tool!
I personally prefer the Charge to the Surge, but as Defender suggested, which one is best is going to be down to personal opinion. The Surge is just a bit too heavy for me to EDC, but I work in an office and rarely (if ever) need anything heavy. Both are very good tools.
They pliers are not broken. They are just worn out on some places (it happened while handling items, with a big amount of force, that have sharp edges). It looks as if the teeth on the pliers have been flatted.
-
@Defender said:
Whoever the distributor for your area is is the one to contact for warranty information. According to Leatherman.com, for Croatia the distributor is:DREAM POINT TOCKA SNA d.o.o.
ISCE 17A
10000 ZAGREB
CROATIA
TEL: 01/46 45 026
FAX: 01/46 45 027
www.dream-point.hr
dream.point@zg.htnet.hrDef
Thanks for the info

-
I'm having a problem with the clip-point knife.
When it is closed it isn't in the center of the handle.
It is gently brushing along the inner part of the handle (the serrated blade is in the prefect center). When I close it I can feel the blade touching and scrubbing the inner wall. -
The blades definitely don't fit in their homes neat like.
but given that you could park the space shuttle in the space given, mine has not caused an issue beyond ugliness.
The space for the blades in the Surge is at least 1 1/2 times that of the space in a SAK, and the sake fits two tools in a layer!
ridiculous!
-
I've asked leatherman's customer support and they said that the blade should be in center of the handle and to send them the tool to fix it.
I have tried to tighten the screws a bit and it gets the blade aligned but it makes it too stiff and when I try to open the blade the screws rotate in the direction of the blade movement.
I have loosened the screw to it's original position and now I'm back at the drawing board -
now check this out.
when I open and close the knife everything is o.k.
When I open and close the exchangable saw it tightens or looses the screws (when it is opened or closed you can actualy see the screws moving in the same direction) on both the saw and the knife so either you get them both loose so that they brush against the inner walls or you can't even open them because of the tightnessHELP :-[ :-[ :-[
EDIT:
I have washed the surge in warm water and dried it and lubricated it with Fuchs Geralyn (a lubricant in food industry).
Could that be the problem? -
@markof said:
now check this out.
when I open and close the knife everything is o.k.
When I open and close the exchangable saw it tightens or looses the screws on both the saw and the knife so either you get them both loose so that they brush against the inner walls or you can't even open them because of the tightnessHELP :-[ :-[ :-[
I'm sure this has come up before
. I think it was Bob (J-Sews) that mentioned it so hopefully he'll chime in soon (could be wrong though). -
You do seem to be having a lot of problems with it.
-
I have your answer! Next time buy a Swisstool...
Sorry, just playing around, I don't have any real input. :D
-
Damn... I think I've done it

After few attempts with tightening and loosening the screws (by turning them 1/4 or 1/2 of a turn clockwise and counterclockwise) it didn't get any better (the clip point blade was aligned but the saw was still making problems :ahhh ) so I've moved to more drastic measures.
I opened the saw halfways (90 degrees) and wiggled it laterally because it looked to me as if the saw was stuck to the screw so I tried to use it as a lever and make some space between them.
For now it opens and closes without moving the screws.
I'll keep you posted if anything changes

P.S. Sorry guys for chatting on the topic but I love my new Surge and I couldn't let some silly little flaw mock the tool brand Leatherman Surge >:(
-
Hopefully that's sorted then. :)
And please don't apologise, tool talk is what we do best. ;) :D
-
@Defender said:
Mine is a much older one, and according to Ben, very rare, as the date code is 0505 in both handles! :PYou are right, by the way, the code is MMYY.
Def
Hey Boss, we are SURGE buddies mine is also 0505. Make a good rattle for babies when closed :D
WELCOME TO THE FORUM MARKOF, WELCOME TO A HAPPY MAGICAL PLACE THAT IS MULTITOOL.ORG -
Mine is a much older one, and according to Ben, very rare, as the date code is 0505 in both handles! :P
You are right, by the way, the code is MMYY.
Def
Hey Boss, we are SURGE buddies mine is also 0505. Make a good rattle for babies when closed :D
WELCOME TO THE FORUM MARKOF, WELCOME TO A HAPPY MAGICAL PLACE THAT IS MULTITOOL.ORGHappy? I thought we were all miserable with too many
toystools to buy and not enough money. =o
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
