Kick, Fuse, Blast & Core Owners group club.
-
lovely polish on the fuse, ive removed the knifeblade from mine so i can make it uk legal carry.....i just need to find something to put in its place. ive been carrying it with only the two flat drivers in one of the handles, it rattles a bit, but the drivers click into place nicely when you lock them out. any suggestions on what i can put in the knifeblades place and where i can get it. was thinking of maybe some sort of file or awl?
Have a look a few posts back. I got a SOG file and saw from Heinnie. There is enough metal on the tang to grind it to LM profile. The SOG file is exactly the same thickness as the Rebar file (1.8mm), the SOG saw slightly thicker (2.0mm against 1.8mm) so I used the Rebar saw in my Fuse. The Fuse blade is 2.4mm so you have a bit in hand plus a thick washer. You really need to ring the changes between the handles for optimum fit. I made an awl from a Kick driver but you can get a SOG awl (Edit: or Miknitro's idea).
Go for it.
i think im gonna get the sog file from heinnie when i make my next set of purchases from them as there are a few other things ive had my eye on from them recently, but will have to wait till payday i also like the idea of an awl and might have play as miknitro suggests >:D
-
@Miknitro said:
Hey guys I couldn't find a owners group for my Fuse an didn't notice any for these other great older MTs either so here we go.I bought my Fuse in 05 I think, been in my pocket every day since.
Well until I picked up a Wave, though that just gave me some time to clean my Fuse up from daily wear Edc. Now that it's cleaned up, I want to put it to work again lol.
It's riding back up to my Wave at moment but I know I can count on it being good to go.
So without further delay here some pics to entertain and get others motivated to dig out their old tools and site them here.







I should locate new pins for it one day, maybe a saw. If this out of place or duplicated please remove.
Mike
Could you put in a photo with the Dremel head you used and the compound? I tried twice and ruined blades and what you did is just gorgeous...
-
Trick I found was, slightly heat applicator on item to polish, hold in hand to monitor temperature. It should never get so hot you can't hold it. I keep my skin pressed against to feel any heat spikes. Tap spinning applicator on choice of compound lightly to color it, then start polishing, never sit always keep moving the applicator.
Red or gray(cleaner) for heavy scratching, or brushed steels. Then green ,(Jewellers) and onto blue(French) etc...blue is kind of kool. I get mine from rock polishers with 5k sandpaper, basically expensive paper towels.
If using a wetish compound, it'll fly around, if hard wax based it will fly around but not as bad. Don't use too much, you'll get messy but roof shouldn't coated overtop of you messy..But the blue compound makes alloys pop IMO.
Its hard to advocate polishing, too hot can ruin temper too cold and you get streaking in steel, though that it just compound that has not been used up yet.My wife tells me I should offer it as a service for some, idk.
Its basically high speed stropping. We used to use a bailers leather belt on farm, polish an sharpen in a blink.Idk if that helps, but ask if any parts are muddier then others etc.
Edit to add, I use a variety of wheels on my dremel, spin it at no more then 60k an no less then 40k to avoid stuttering. Over 60 an it gets squirrelly IMO.
Second edit, its 8k sand paper not 5k, I get from rock people.
That for record is for fancy knives and jewelry for touch up. Maybe a bearing surface on my pico engine in my RC truck. -
Kick Owners Group????????
Well , well then.......... Yep! I have one!! :D 8)

-
-
At first I thought I would only need at most, 2 of each, one in stainless and the other in black oxide. Well that quickly went out the window.

-
-
I was not a big fan of them at first, but they have certainly grown on me since, especially fielding the knifeless Fuse as my companion for many years due to work restrictions.
-
I think they have grown on a lot of people since they came out in 2004 :D I remember they did get a lot of bashing though
Wished they had of came out with direct replacements for them with the Rebar chasis or similar though :-\ -
I was always a fan of the Kick. I thought it got overshadowed but I can appreciate its simplicity.
-
-
I'm in





-
Sure a nice one to be in with as well Steve

-
Awesome grouping , Chako!! 
Nice one , Steve 8) Is the clip a Mod or an Company aftermarket add on?

B/O tools rock 8) -
Thanks cali, that is a Kick clip. I think you had to buy them as an add on.
-
Thanks cali, that is a Kick clip. I think you had to buy them as an add on.
Yup - that's exactly right :)
I figured you could still buy them from LM
Glad I still have a couple laying around
I used them for years as wrenches up til recently when I got my wrenches loki-mobile 
-
New page banana man dance

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


