What did you use your Leatherman for today?
-
Just doing my day to day job. Leatherman did some overtime today. Broke the bit but. Have got enough spare ones at home.
-
Sideclip and bit adapter disassembling a table

-
Quick way of changing a serpentine belt on an engine.
Cut the old one off (easy-10 seconds)And fit new one. (3 hours later)
-
One of the suicide doors on my extended cab f150 would not open, bad cable was most likely culprit.
So out came the ST300 I'm carrying every day for this month's challenge. But with no bit driver, I couldn't do much.
So out came the Wave. I had ground down an old bit driver to fit in the bit holder. It got lots of use. Only a pic or two as I was just too busy to take pics.
Several minutes and a few wire ties later, the door works again...



Sent from my Nexus 6 using Tapatalk
-
You need to get a LM bit adapter to go over the square Phillips that way you can use a bit kit with it
:D -
So I had a defectively painted cover of a neck pickup on my am std tele and decided I can replace it with ease. Ordered a new one and replaced it. However I've destroyed some of those super-tiny wires and now despite the fact the guitar looks better the neck pickup doesn't work. Ordered a new pickup as a result[emoji85]. Don't try this at home [emoji15]

Dream. Wish. Leave nothing undone. Repeat.
-
@alexanderre said:
So I had a defectively painted cover of a neck pickup on my am std tele and decided I can replace it with ease. Ordered a new one and replaced it. However I've destroyed some of those super-tiny wires and now despite the fact the guitar looks better the neck pickup doesn't work. Ordered a new pickup as a result
. Don't try this at home 

Dream. Wish. Leave nothing undone. Repeat.
Ouch!
-
So I had a defectively painted cover of a neck pickup on my am std tele and decided I can replace it with ease. Ordered a new one and replaced it. However I've destroyed some of those super-tiny wires and now despite the fact the guitar looks better the neck pickup doesn't work. Ordered a new pickup as a result
. Don't try this at home 

Dream. Wish. Leave nothing undone. Repeat.
Ouch!
Sorry to hear that alexanderre

-
So I had a defectively painted cover of a neck pickup on my am std tele and decided I can replace it with ease. Ordered a new one and replaced it. However I've destroyed some of those super-tiny wires and now despite the fact the guitar looks better the neck pickup doesn't work. Ordered a new pickup as a result
. Don't try this at home 

Dream. Wish. Leave nothing undone. Repeat.
Ouch!
Sorry to hear that alexanderre

Bummer ! Those tiny wires are so delicate on those pickups, very easy to break. They are as thin as a hair.
-
So I had a defectively painted cover of a neck pickup on my am std tele and decided I can replace it with ease. Ordered a new one and replaced it. However I've destroyed some of those super-tiny wires and now despite the fact the guitar looks better the neck pickup doesn't work. Ordered a new pickup as a result
. Don't try this at home 

Dream. Wish. Leave nothing undone. Repeat.
Ouch!
Sorry to hear that alexanderre

Bummer ! Those tiny wires are so delicate on those pickups, very easy to break. They are as thin as a hair.
Oh yes, they really are :(
Dream. Wish. Leave nothing undone. Repeat.
-
Opened a package from RaptorMan...


Sent from my Nexus 6 using Tapatalk
-
While not me exactly, my BO Wave did get used today... LOL
My 18yr old son's girlfriend decided his scraggly facial hair needed work. So she borrowed my Wave and used the scissors to do some trimming! Hahahahaha!!!!
It'll need a good cleaning when she's done!!!!! LOL



Sent from my Nexus 6 using Tapatalk
-
Got back from playing with the drone, was happily editing the footage and BOOM. Blue screen of death and messages about talking to dealers >:(
Fortunately I have backups, but they are on a network device that my backup software's recovery disk can't access - grrr. So I've used my Charge to get into my PC to connect a disk with a backup image on it. I should really be sleeping!
Restore software is currently checking the backup image and taking a long time about it :
I'm off to bed and worry about it in the morning.
-
Finally got to point where I could disconnect the temporary HD and screw the case cover back on. Job done (with the Charge again) :)
-
-
Mrs. TJ and myself put in a window a/c unit for our first floor on Monday night and all the screws were put in using my C33T

-
Toilet repair. Even used the awl to remove a line seal so could replace the leaky bugger. No wet floors now.
-
No pics, but used my ST300 to fix a toilet. The lever on the handle broke off. So I used the awl to bore a hole and run a screw thru the end of the lever and into the handle.
Then used pliers to remove the chain to the flapper and rework it. Now toilet flushes like a dream!!
Sent from my Nexus 6 using Tapatalk
-
I was vacuuming earlier tonight and the prongs on the plug for the chord was a little bent. I took out my crunch and bent them back into place.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


