Show off your Sak mod's!
-
-
Hi there Bro... Thought the pic and the SAK looked familiar... Didn't you change the scales to the red coloured plus one? :D
hello jaya_man! nice to meet you here, of course you know that SAK, you help me to built it right? haha..yep I changed the scale with the red one and that Yeoman ride on my belt everyday.
Correction, full credit on that build goes to you... Now let's move on to the next project [emoji8]
Sent from my iPhone using Tapatalk
-
-
-
My first attempt at an alox mod. It's a Pioneer X with the Syph-style inline Phillips + 2 openers layer, and 91mm scissors (nail-nick on the normal side!), and black-with-red-shield scales from a Pioneer.
I made a few mistakes and I'm not 100% happy with the results - but it works :) and it was a good learning experience. The action on the phillips and scissors are a bit rough, and the phillips sits a little higher than I'd like.Good job.
Now you just need some brass liners and your all set. I have one much the same as yours Robert made for me.
Will switching the in-line phillips and openers to the opposite side of the layer cause any problems?
Sent from my iPhone using Tapatalk
-
Yeah I always wondered why the Compact with less tools cost more then some SAKs with more.
My friend just bought new Compact a week ago for his mod. It's about IDR 488.000 here (US$ 37.5).
Thin SAK with lots of function, maybe that's the cause.
Sent from my SM-J500G using Tapatalk
That friend of yours sounds familiar... [emoji23][emoji23][emoji23]
Ayway, think I may have just won an auction for a used Compact over the local 2nd hand market... Not bad for a little over usd 15 incl. delivery... Fingers crossed [emoji8]
Sent from my iPhone using Tapatalk
-
Yeah I always wondered why the Compact with less tools cost more then some SAKs with more.
My friend just bought new Compact a week ago for his mod. It's about IDR 488.000 here (US$ 37.5).
Thin SAK with lots of function, maybe that's the cause.
Sent from my SM-J500G using Tapatalk
That friend of yours sounds familiar... [emoji23][emoji23][emoji23]
Ayway, think I may have just won an auction for a used Compact over the local 2nd hand market... Not bad for a little over usd 15 incl. delivery... Fingers crossed [emoji8]
Sent from my iPhone using Tapatalk

-
Will switching the in-line phillips and openers to the opposite side of the layer cause any problems?
You could certainly do that, but I think it might become a bit difficult to reach the nail nick on the can opener. It would be facing the high end of the blade.
It would also put the can opener in the middle of the tool, which might make it hard to open some cans.
Oh, and welcome aboard J_M. Always good to have another modder around.

-
@jaya_man said:
That friend of yours sounds familiar... [emoji23][emoji23][emoji23]Ayway, think I may have just won an auction for a used Compact over the local 2nd hand market... Not bad for a little over usd 15 incl. delivery... Fingers crossed [emoji8]
Sent from my iPhone using Tapatalk
Haha nice score jaya_man. Nice price for a mod donor.
So what's next?
Sent from my SM-J500G using Tapatalk
-
That friend of yours sounds familiar... [emoji23][emoji23][emoji23]
Ayway, think I may have just won an auction for a used Compact over the local 2nd hand market... Not bad for a little over usd 15 incl. delivery... Fingers crossed [emoji8]
Sent from my iPhone using Tapatalk
Haha nice score jaya_man. Nice price for a mod donor.
So what's next?
Sent from my SM-J500G using Tapatalk
A retro look golfer would be nifty [emoji8]
Sent from my iPhone using Tapatalk
-
Will switching the in-line phillips and openers to the opposite side of the layer cause any problems?
You could certainly do that, but I think it might become a bit difficult to reach the nail nick on the can opener. It would be facing the high end of the blade.
It would also put the can opener in the middle of the tool, which might make it hard to open some cans.
Oh, and welcome aboard J_M. Always good to have another modder around.

Hmmm, makes good sense... Thanks for the warm welcome. [emoji1317][emoji1317][emoji1317]
Sent from my iPhone using Tapatalk
-
Hey guys, coming out of lurking to present my idea and ask for tips and any heads-ups for issues I might encounter. I have 3 donor knives that I'm wanting to turn into 2 custom knives.
<u>The donors (I got these all used for cheapish prices):</u>
Swisschamp (short phillips/clear plastic mag and stainless metal file, so...newest version I guess) with USA flag scales $35
Compact with red nylon scales $8.70
Outrider (phillips/camo version 55731) with nasty chip in main blade $17 (was listed as a OH Trekker....come on now people)<u>I want to make one 91mm "main" multi-tool as my EDC and alternative (hopefully a little thinner) to a Swisschamp. Mainly used for working on bicycles and music gear, cutting moleskin and tape, fixing all types of gadgets on the go, often in urban environments. The tools would be (not particular layer order yet):</u>
•Pen Blade across from** Nail file** (from Compact) - Thinking about replacing the outer plate that has the little raised section (for the modern/thinner main blade) with a flat one, and using both of the little spacers that come with the pen blade/nail fail and keeping the spring standard thickness...but not sure how this would mesh together...basically trying to get pen blade and nail file in the same layer. EDIT: to clarify, there would be no large blade at all
•Cap Lifter across from Can Opener
•Pliers
•Scissors
•Metal file/saw (stainless/latest version)
•Inline Phillips (preferably longer one from a gray mag glass knife, shorter version if fit requires) across from Inline Fine Phillips (from scissor layer on the Outrider) - This is obviously the wonkiest part of the design. Looking at the 91mm phillips/mag glass spring, I see there is a cutout on the spring for the mag glass to tuck into...so i thought maybe I could put the IL Phillips (regular size one) on the mag glass end of the spring and then put the Fine Inline Phillps on the other end and it could tuck down into that pocket where the mag glass normally sits. Obviously I'd also need a spacer since the Fine Inline Phillips is the thickness of scissors (not sure if 110mm scissors are the same thickness as 91mm scissors). If I can't find a way to re-grind the Fine Phillips, then I'm thinking of just hacking it down into a backside tool (removing the original tang completely)
Back tools would be corkscrew, awl, fine slotted, chisel, then hook in order of preference depending on what springs I have to use to make it work.<u>The other knife would be my 110mm "campsite" knife mainly for food/beverages and firewood and whhhilderness adventures:</u>
•Can/Bottle Layer
•Main Blade (bottom half serrated to get rid of that nick and help with cutting ropes, top half plain for cutting potatoes and enemy ninjas)
•Wood Saw (figure I don't need this unless I'm around a camp fire and from what I've seen the 110mm saw is a little nicer length for actually sawing things)
•Cork Screw (from Compact) -will the corkscrew from the Compact work on a 110mm knife? I'm thinking it's the same.
•Nylon Scales (by default for this size, but also because it's gonna get tossed around a bit) -are the nylon scales better for re-use than cellador? I'm thinking the nylon material would chip away less when pulling the scales off, leaving a tighter fit when re-attaching.In both cases I'm thinking I could re-use the pins, but I'm not sure if the 91mm build would be thinner ENOUGH than a standard Swisschamp.
Alternately I was thinking of just tapping one side and reattaching the factory busings to the brass pins with screws (that would be hidden once the scales go on). Another option are these nice copper SwissB plus scales I see...says they need to be epoxied...but I'm thinking of drilling and countersinking them ala Alox mods (though still using the outer plates). If I did this, is there a thickness of interally-threaded tube that I can just slide in to replace the brass pins? or would I have to re-drill everything for bigger holes?I've read that the OH series of 110mm knives have bigger pins than the regular 110mm knives..but how do the pins from the 110m knives compare to 91mm knives? Will the hole in the Fine Inline Phillips (from the Outrider) be larger than the holes in the tools from the Swisschamp?
When using etching solvents, do you apply nail polish or resist-ink to the holes on all the tools? (I'm thinking that the holes are drilled precisely and etching could slightly erode the holes, making a looser fit on the pins...I really love how precisely machined the teeth are on the pliers...so I'm thinking I wanna cover that all up before dipping...did any of you have to re-peen the scissors after acid/circuitboard sollution-ing them? I'm wondering if they still fit as tightly together after the dip.
Thanks guys...love this thread as well as one I saw where it's all coffee and SAKs...so awesome. Love all these builds and ideas.

-
@JamesJ said:
Hey guys, coming out of lurking to present my idea and ask for tips and any heads-ups for issues I might encounter. I have 3 donor knives that I'm wanting to turn into 2 custom knives.<u>The donors (I got these all used for cheapish prices):</u>
Swisschamp (short phillips/clear plastic mag and stainless metal file, so...newest version I guess) with USA flag scales $35
Compact with red nylon scales $8.70
Outrider (phillips/camo version 55731) with nasty chip in main blade $17 (was listed as a OH Trekker....come on now people)<u>I want to make one 91mm "main" multi-tool as my EDC and alternative (hopefully a little thinner) to a Swisschamp. Mainly used for working on bicycles and music gear, cutting moleskin and tape, fixing all types of gadgets on the go, often in urban environments. The tools would be (not particular layer order yet):</u>
•Pen Blade across from** Nail file** (from Compact) - Thinking about replacing the outer plate that has the little raised section (for the modern/thinner main blade) with a flat one, and using both of the little spacers that come with the pen blade/nail fail and keeping the spring standard thickness...but not sure how this would mesh together...basically trying to get pen blade and nail file in the same layer. EDIT: to clarify, there would be no large blade at all
•Cap Lifter across from Can Opener
•Pliers
•Scissors
•Metal file/saw (stainless/latest version)
•Inline Phillips (preferably longer one from a gray mag glass knife, shorter version if fit requires) across from Inline Fine Phillips (from scissor layer on the Outrider) - This is obviously the wonkiest part of the design. Looking at the 91mm phillips/mag glass spring, I see there is a cutout on the spring for the mag glass to tuck into...so i thought maybe I could put the IL Phillips (regular size one) on the mag glass end of the spring and then put the Fine Inline Phillps on the other end and it could tuck down into that pocket where the mag glass normally sits. Obviously I'd also need a spacer since the Fine Inline Phillips is the thickness of scissors (not sure if 110mm scissors are the same thickness as 91mm scissors). If I can't find a way to re-grind the Fine Phillips, then I'm thinking of just hacking it down into a backside tool (removing the original tang completely)
Back tools would be corkscrew, awl, fine slotted, chisel, then hook in order of preference depending on what springs I have to use to make it work.<u>The other knife would be my 110mm "campsite" knife mainly for food/beverages and firewood and whhhilderness adventures:</u>
•Can/Bottle Layer
•Main Blade (bottom half serrated to get rid of that nick and help with cutting ropes, top half plain for cutting potatoes and enemy ninjas)
•Wood Saw (figure I don't need this unless I'm around a camp fire and from what I've seen the 110mm saw is a little nicer length for actually sawing things)
•Cork Screw (from Compact) -will the corkscrew from the Compact work on a 110mm knife? I'm thinking it's the same.
•Nylon Scales (by default for this size, but also because it's gonna get tossed around a bit) -are the nylon scales better for re-use than cellador? I'm thinking the nylon material would chip away less when pulling the scales off, leaving a tighter fit when re-attaching.In both cases I'm thinking I could re-use the pins, but I'm not sure if the 91mm build would be thinner ENOUGH than a standard Swisschamp.
Alternately I was thinking of just tapping one side and reattaching the factory busings to the brass pins with screws (that would be hidden once the scales go on). Another option are these nice copper SwissB plus scales I see...says they need to be epoxied...but I'm thinking of drilling and countersinking them ala Alox mods (though still using the outer plates). If I did this, is there a thickness of interally-threaded tube that I can just slide in to replace the brass pins? or would I have to re-drill everything for bigger holes?I've read that the OH series of 110mm knives have bigger pins than the regular 110mm knives..but how do the pins from the 110m knives compare to 91mm knives? Will the hole in the Fine Inline Phillips (from the Outrider) be larger than the holes in the tools from the Swisschamp?
When using etching solvents, do you apply nail polish or resist-ink to the holes on all the tools? (I'm thinking that the holes are drilled precisely and etching could slightly erode the holes, making a looser fit on the pins...I really love how precisely machined the teeth are on the pliers...so I'm thinking I wanna cover that all up before dipping...did any of you have to re-peen the scissors after acid/circuitboard sollution-ing them? I'm wondering if they still fit as tightly together after the dip.
Thanks guys...love this thread as well as one I saw where it's all coffee and SAKs...so awesome. Love all these builds and ideas.
There are basically two versions of 111mm vics:
Liner-locks (oht, rescue tool, etc.)
Side locks (outrider, workchamp, etc.)The liner locks have similar pin sizes as the 93mm models (3mm outer, 2.5mm middle)
The side locks share the same pin sizes as the 91mm models (2.5mm outer, 2.25mm/2.2mm middle)
Still trying to imagine your concepts and would love to see the end results [emoji16][emoji23][emoji8]
Hmmm, 91mm concept you have can make use of the remaining pins from the swisschamp I guess since practically 2 layers will be eliminated.
Sent from my iPhone using Tapatalk
-
Just realized from your pics that you may have an 84mm Sportsman instead of a 91mm Compact [emoji16]
Sent from my iPhone using Tapatalk
-
@jaya_man said:
Just realized from your pics that you may have an 84mm Sportsman instead of a 91mm Compact [emoji16]Sent from my iPhone using Tapatalk
Ah...you are right...I believe I used the wrong name...and I do know the difference! OOPS! But wait...that IS still the nail file that works for 91mm knives right? Even though it's from an 84mm....
-
I haven't tried it out myself... Am fond of the combo tool on the Compact... As well as its hook with file...
Maybe others can share their experience with combining the pen blade and file... At the minimum, the pivot hole on the file needs to be drilled to 2.5mm
Sent from my iPhone using Tapatalk
-
@jaya_man said:
I haven't tried it out myself... Am fond of the combo tool on the Compact... As well as its hook with file...I wish that was just the standard way the hook came...I've also thought about using a 58mm non-SD file, somehow attaching as a back tool.
The models that come with the file on the hook aren't cheap. I did see some Compacts used...but they must have been early...both lacked the file on the hook.
I know some of the electronic scales models have it...but haven't seen it anywhere else, aside from SuiseB Yeomans.@jaya_man said:
At the minimum, the pivot hole on the file needs to be drilled to 2.5mmAh good to know...I have never mixed tools like this...
Worst case scenario I'll just make an Explorer MS with Pliers...whatever that is...Deluxe Scientist Mountaineer...but having that fine phillips as a layer tool...if I can do it...would be pretty awesome. Otherwise I can toss a mag glass in there.
-
Is the tool on the lower right of the pic what you meant? Hmmm... Might be a tall order putting that as an inline tool...

Sent from my iPhone using Tapatalk
-
Don't really know if anybody has shared this before in the forums, but thought I'd just share it anyway... An Autopsy of a Swisschamp... [emoji16]

Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
jaya_man
That is some awesome mods to come in here with right off the bat :o They look really good and hope you stick around and show us more later ;)