Me and my scissors
-
I, literally, am about to do the same thing! Haha. Finally got my scissors and got me some wrenches too! I'm going to add them onto my everyday carry Rebar, for like you said, the (near) perfect tool!
Btw. The knifeless rebar has scissors.
That is why it irritates me so much that they aren't on the regular version Rebar

:D
fully agree. Take a poll and see who would rather have a spacer and lanyard ring (which only gets in the way when you have para it's on it and trying to use the tools?), or, the scissors. It'll be a pretty one sided poll... C'mon leatherman ;)
They used the excuse that they designed this for somebody who works hard ??? That is why they left scissors and diamond file out
I work hard and those are a couple of my favorite tools
I mean who do the designers interview for this sort of thing anyway ??? -
Nice work P

-
loki's wrenches are amazing.

Scissors in Rebar are sweeeeet.

Lanyard ring does not cut it (pun intended).
Also, while we're at it, awls in Charges, and Waves.


-
-
I did forget to mention that the scissors rub just a little bit on the file but not enough to aggravate me ;)
Why not swap the file around for another long tool?

Then the file would just rub on something else. The washer Poncho replaced the with the scissors kept the file from rubbing the inside tools. I bet if you look closely at the scissor side lock, its no longer flush with the rest of the tool.
-
I did forget to mention that the scissors rub just a little bit on the file but not enough to aggravate me ;)
Why not swap the file around for another long tool?

I used the same washer that was in before (a thin one
) but I think the file may have a slight bend in it 
-
Nevermind the lanyard ring was against the thin washer and not a reg tool
That's why it didn't rub against anything :D -

I did forget to mention that the scissors rub just a little bit on the file but not enough to aggravate me ;)
Why not swap the file around for another long tool?

I used the same washer that was in before (a thin one
) but I think the file may have a slight bend in it 
Wasnt the lanyard loop next to the file? That would act as an extra washer. If im wrong yall should just ignore my previous comment....Never mind. Poncho beat me to it.
-
@sLaughterMed said:

@Poncho65 said:I did forget to mention that the scissors rub just a little bit on the file but not enough to aggravate me ;)
Why not swap the file around for another long tool?

I used the same washer that was in before (a thin one
) but I think the file may have a slight bend in it 
Wasnt the lanyard loop next to the file? That would act as an extra washer. If im wrong yall should just ignore my previous comment....Never mind. Poncho beat me to it.
I gotcha that time
:D -
I did forget to mention that the scissors rub just a little bit on the file but not enough to aggravate me ;)
Why not swap the file around for another long tool?

I used the same washer that was in before (a thin one
) but I think the file may have a slight bend in it 
I've got my scissors in the other handle next to the saw , no rubbing.
I switched back to the Rebar plier head yesterday and got a nice blood blister on my thumb in the process

You could probably get a slightly thicker washer at the hardware store that would give the file enough clearance.
-
I did forget to mention that the scissors rub just a little bit on the file but not enough to aggravate me ;)
Why not swap the file around for another long tool?

I used the same washer that was in before (a thin one
) but I think the file may have a slight bend in it 
I've got my scissors in the other handle next to the saw , no rubbing.
I switched back to the Rebar plier head yesterday and got a nice blood blister on my thumb in the process

You could probably get a slightly thicker washer at the hardware store that would give the file enough clearance.
I have a few of the thin washers laying around and I may just add anther to see if it helps
But it is Mr. 300 that's rubbing a little ;) I think I have my Rebar setup just like yours though
Well close to yours anyway :D -
@ReamerPunch said:
loki's wrenches are amazing.
Scissors in Rebar are sweeeeet.

Lanyard ring does not cut it (pun intended).
Also, while we're at it, awls in Charges, and Waves.


I agree awl's should be in everything :D
-
loki's wrenches are amazing.

Scissors in Rebar are sweeeeet.

Lanyard ring does not cut it (pun intended).
Also, while we're at it, awls in Charges, and Waves.


I agree awl's should be in everything :D
awls well with that statement :D
-
[quote author=Poncho65 link=topic=67409.msg1306107#msg1306107 date=1468810391]
I did forget to mention that the scissors rub just a little bit on the file but not enough to aggravate me ;)Why not swap the file around for another long tool?

I used the same washer that was in before (a thin one
) but I think the file may have a slight bend in it 
I've got my scissors in the other handle next to the saw , no rubbing.
I switched back to the Rebar plier head yesterday and got a nice blood blister on my thumb in the process

You could probably get a slightly thicker washer at the hardware store that would give the file enough clearance.
I have a few of the thin washers laying around and I may just add anther to see if it helps
But it is Mr. 300 that's rubbing a little ;) I think I have my Rebar setup just like yours though
Well close to yours anyway :D
[/quote]Worth a try anyway

-
Poncho mods tools? I had no idea. Great going on the mod
Evil likes scissors on tools..... ;) -
-
Evil
how's it going? Good to see you pop in -
New page banana man dance

-
Hey there, Demel.....
Things have been hectic and crazy busy as they most typically are this time of the year. ComicCon related stuff is offically over so things will slow down a bit. I hope that all has been going well on your end of things..... 
-
Doing a bit of swapping the gracious SteveC
traded me the diamond file he made for the Rebar in this thread/topic/67481
I got the file that SteveC made this past Monday and am just now getting around to putting pics of it

I have now about as close to what I want out of the Reabr as possible
:D I have put in scissors, added a diamond file and sharpened the can opener to make it more of a package cutter 
Taking a cue from SteveC himself I thought this shot was appropriate ;)
I am thoroughly pleased with the Rebar and will happily strap it to my belt Monday August 1st :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




