And so it begins.... (My adventures into Alox!)
-
Friction press fit ?
-
@Syph007 said:
Nothing there except brass and glass. The only machined feature** is one inner lip** that prevents the glass from passing though one side.The solution was so simple I didn't even believe it until I tried it and proved to myself it worked. The glass can not be removed even with firm figure pressure.
something like a depression in the center part so once its press fitted it can't go back?
-
I know, I know :ahhh :ahhh :ahhh

It's magic :o

:D
-
-
Is the frame slightly oval and when you drop the lens in you turn it so that it tightens to a friction fit ?
-
-
We need some more clues or I'm with Poncho and going with magic :D
-
Its a snug fit to start with just 0.001" extra on the diameter, and then the magic is... I squeeze it in a padded vice to pinch it tight. I wasn't sure if that would hold it in, but it did and it doesn't move or come out with max force of my fingers. To release it I would just squeeze in a perpendicular direction.
I spent days testing way more complex solutions that all sucked. Then I think... squeeze it. And dammit it worked just fine. The set screw idea of version 1 was so fiddly to do I hated it. So now I can make this in 3 machining operations and have it work repeatably.
-
I love simple solutions

So I was close as in you effectively make the frame microscopically oval by squeezing it a bit.
-
-
I wonder how hard you can squeeze it before you break the lens?
-
-
@hiraethus said:
I wonder how hard you can squeeze it before you break the lens?I wondered that as I was watching the glass, then I put on safety goggles... then nothing bad happened.
-
Here are the other things I tried
- Machine press fit ring to hold it it. Fail as it wastes more brass sheet, more machine time and didnt look good.
- Crazy glue - Really sucked as I could never keep it from being visible at the edges.
- Clear silicone - Same problem as glue
- Machine tabs to hold it in - Worked but had the effect of making the glass look non round so esthetic fail and also more machine time.
- Machine oversize ring to then screw over top. Way more machine time and then I need screws and drilling and tapping.. yuck
- Machine 2 thinner versions each with a lip then sandwich them. Double machine time, more material used, and a seam down the center....
-
Looks great!
I'm going to do something similar but machine the lens bore in softjaws, with of course slight tension on the vise. After the bore and slot are machined, release the jaws and it should spring to a slight oval shape. Well see..
-
Nice work Syph

Now I want an engraved SAK..... -
-
Playing around this morning with the diamond engraver. :D
-
Nice smurfing job :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D