Paladin PT-540
-
I received the covers from SOG. They mistakenly sent me the PowerLock covers instead of the PowerAssist
The spacing inside the cover channel is thinner than the handle thickness by about the thickness of the sheet metal the handles are made of. So, I cannot do any bending for the covers to fit, as their two edges will just flare out. Furthermore, the pliers are long, and do not go pass the covers' cutouts either. So, to adapt a SOG multi's covers on the PT-540, the cover channels must accept the PT's thickness, as well as the long pliers' noses. I think the PowerAssist covers may fit (based on the amount of tool load, and their looks), but I still have to deal with modifying the cutouts. Only someone with both PowerAssist and PT-540 at hand can confirm this.As this point, I will keep the tool as-is. :-\
-
Bummer

See if they would send the right ones.
-
See if they would send the right ones.
I did ask for the PowerAssist covers, but the customer service replied by saying they did not have an exact match for the PT-540 (duh!), and I had to bend to make them fit. I think the agent did not really looked into the drawings for dimensions, or the employees picking up covers for me could not tell the difference between the PL and PA cover looks and sizes.
Either way, SOG already went extra mile on this issue, as they are not responsible for this tool's warranty. I do not want to pester them and let it go.
(Or maybe I should tell them I have over $1,500 worth of SOG knives, so they can be a lil' nicer? :D )
-
You never know, it's worth asking. Just explain that while you appreciate it, they sent the wrong covers and could they send the right ones.
-
Maybe include some pics in your email, that's get them going.

-
@ReamerPunch said:
Maybe include some pics in your email, that's get them going.
I sent pictures twice, and explained 3 times. Maybe the gentleman read too fast and did not see the difference between PowerAssist and PowerLock. Anyway, I was told a set of PA handle covers are requested for me. Cross my fingers that the picker will not mess up this time.
-
Well, a packet from SOG arrived today. And you can guess, they sent me another set of PowerLock S62 handle covers
This make me think they do not have PowerAssist handle covers at hand as spares, as they are not being offered as accessories on the website.I give up.
(Still, SOG customer service is awesome! I would say they are better than Leatherman in term of human interaction)
-
-
@SteveC said:
Is this what you are needing ?
Wait... yeah, that's what I "may" need. How I did not find it or think of finding it on their website ??? I guess, because it started with my inquiry as weather the PA covers would fit the PT-540, and the CS rep went ahead and sent me a pair of PL covers, and thing went from there...
I will just buy the covers from them, instead of pestering thr rep again. Hopefully, they will pick the right parts this time. :P
Thanks, Steve.
-
Good luck this time chrono
:D -
new page banana man dance

-
Is this what you are needing ?

Wait... yeah, that's what I "may" need. How I did not find it or think of finding it on their website ??? I guess, because it started with my inquiry as weather the PA covers would fit the PT-540, and the CS rep went ahead and sent me a pair of PL covers, and thing went from there...
I will just buy the covers from them, instead of pestering thr rep again. Hopefully, they will pick the right parts this time. :P
Thanks, Steve.
You bet

-
When looking at my PT-540 pair today, I found that there are at least 2 design variations. Look at my pictures, you will see the differences on the pliers and handle designs:
- Piece #1: + Finer lettering on pliers and handle
+ 2 built-in cover stops on each handle
+ Thinner pliers tips
+ Pliers teeth match perfectly (maybe just this piece) - Piece #2: + Thicker lettering on pliers and handle
+ 1 built-in cover stop on each handle
+ Thicker pliers tips
+ Pliers teeth do not match perfectly (maybe just this piece)
Which one is earlier design? Is this proof that SOG updated design for better user need or just saving on manufacturing purpose? My guess is #1 the earlier design.




- Piece #1: + Finer lettering on pliers and handle
-
I always thought, that SOG made a great mistake discontinuing a classic like the Paladin 540. A must for telephony, and IT work. It would be nice to see-it released again; under the SOG branding. Perhaps as the: Field Tech Multi**


-
I agree that SOG should release this tool in SOG branding becasue there isn't another tool out there that can compete with this one
the plier head is very awesome and I think they need to try to put them back out into the market 
-
My rarest multitool :D

-
Nice example, congratulations!

-
Size comparison of the PT540, SOG PA, Victorinox ST, and Leatherman Charge TTi tools.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login