Show off your Sak mod's!
-
-
Would it help to put back a little more tension on the spring if that part in the spring is removed?
Ah...what I mean is that the fine phillips is loose and moves..the regular phillips is tight...so removing that piece wouldn't effect things I don't think...but I might be confused!
I was referring to your 111mm fine phillips tool... [emoji16][emoji16][emoji16]
Sent from my iPhone using Tapatalk
-
@jaya_man said:
I was referring to your 111mm fine phillips tool... [emoji16][emoji16][emoji16]Hey now...yeah ok then that little part on the spring doesn't really effect it...basically it needs a little more material on the surface of the spring that touches the tool (or on both sides of the tool that touch the spring when opened or closed)
-
I was referring to your 111mm fine phillips tool... [emoji16][emoji16][emoji16]
Hey now...yeah ok then that little part on the spring doesn't really effect it...basically it needs a little more material on the surface of the spring that touches the tool (or on both sides of the tool that touch the spring when opened or closed)
Ah well... Was hoping if that notch was taken out, the fine phillips pushed all the way down, then the part on the fine phillips will push down on the spring end and add some tension, in addition to lowering down the exposed hook...
Hats of to you for a challenging build... Really can't wait to see the results.
Sent from my iPhone using Tapatalk
-
Finally finished my project. A retro looking 91mm Golfer.
Basically tore down a Compact, removed the multi-purpose hook, replaced the scissors backspring with an older style, replaced spacer/keyring attachment with spacer/no keyring attachment, replaced corkscrew with phillips and slapped some custom wood scales made by a friend.
This was my first attempt at through peening. Not 100% perfect... Sigh... I gotta admit, I still need a lot of work to improve my peening. Also messed up the top scale around the shield area during fine sanding/finishing.
Idea behind this build was to look for a 2 layer edc alternative if pocket space was an issue for the orange Yeoman.
Was really looking forward to edc this baby, but it will have to wait. Am sending this to my friend (who did the custom scales) for re-stamp pressing of the Vic Shield.
Hmmm, now got me thinking... An 84mm modern golfer with similar tools such as this would be an even better alternative to the Yeoman. Hahaha... Will add it to my list of mod projects...


Sent from my iPhone using Tapatalk
-
@jaya_man said:
and slapped some custom wood scales made by a friend.What wood is this? Looks almost like alder...
@jaya_man said:
Am sending this to my friend (who did the custom scales) for re-stamp pressing of the Vic Shield.Great R&D. Next time you can peen first then ship it off for the emblem.
I really wanna try some wood scales...I have a bunch of woods here from guitar building, purpleheart, ebony, various mahogany, maple, ash. I think I can route a clean channel in the scale for tweezers/toothpick using a Dremil router base and a guide...but looking at a factory scale I notice the "roof" of the tweezers slot is higher in the middle (allowing the tweezers to expand slightly). Not sure of any precise way to do that arch.
-
and slapped some custom wood scales made by a friend.
What wood is this? Looks almost like alder...
@jaya_man said:
Am sending this to my friend (who did the custom scales) for re-stamp pressing of the Vic Shield.Great R&D. Next time you can peen first then ship it off for the emblem.
I really wanna try some wood scales...I have a bunch of woods here from guitar building, purpleheart, ebony, various mahogany, maple, ash. I think I can route a clean channel in the scale for tweezers/toothpick using a Dremil router base and a guide...but looking at a factory scale I notice the "roof" of the tweezers slot is higher in the middle (allowing the tweezers to expand slightly). Not sure of any precise way to do that arch.
I Don't know what its called in English but its a local Indonesian wood called Cendana... Yup may have to peen first before emblem. Amazing how much stuff you learn as you go... Next time I do wood, will probably try laser engraving...
Sent from my iPhone using Tapatalk
-
The wood is beautiful
Love how simple and elegant it is 
-
and slapped some custom wood scales made by a friend.
What wood is this? Looks almost like alder...
@jaya_man said:
Am sending this to my friend (who did the custom scales) for re-stamp pressing of the Vic Shield.Great R&D. Next time you can peen first then ship it off for the emblem.
I really wanna try some wood scales...I have a bunch of woods here from guitar building, purpleheart, ebony, various mahogany, maple, ash. I think I can route a clean channel in the scale for tweezers/toothpick using a Dremil router base and a guide...but looking at a factory scale I notice the "roof" of the tweezers slot is higher in the middle (allowing the tweezers to expand slightly). Not sure of any precise way to do that arch.
I Don't know what its called in English but its a local Indonesian wood called Cendana... Yup may have to peen first before emblem. Amazing how much stuff you learn as you go... Next time I do wood, will probably try laser engraving...
Sent from my iPhone using Tapatalk
I didn't realize you're from Indonesia! Greetings to Jakarta and Bali! I miss makanan Indonesia, alamak...
-
and slapped some custom wood scales made by a friend.
What wood is this? Looks almost like alder...
@jaya_man said:
Am sending this to my friend (who did the custom scales) for re-stamp pressing of the Vic Shield.Great R&D. Next time you can peen first then ship it off for the emblem.
I really wanna try some wood scales...I have a bunch of woods here from guitar building, purpleheart, ebony, various mahogany, maple, ash. I think I can route a clean channel in the scale for tweezers/toothpick using a Dremil router base and a guide...but looking at a factory scale I notice the "roof" of the tweezers slot is higher in the middle (allowing the tweezers to expand slightly). Not sure of any precise way to do that arch.
I Don't know what its called in English but its a local Indonesian wood called Cendana... Yup may have to peen first before emblem. Amazing how much stuff you learn as you go... Next time I do wood, will probably try laser engraving...
Sent from my iPhone using Tapatalk
I didn't realize you're from Indonesia! Greetings to Jakarta and Bali! I miss makanan Indonesia, alamak...
Hahaha... Selam--dan Indonesia, my friend... [emoji1309]
Sent from my iPhone using Tapatalk
-
Built this one last month. It's my take on a Farmer X. It's a SPECIAL one.
Can you figure out what makes this one so SPECIAL? ;)
(Please excuse the dirty knife. Just pulled it from my pocket to shoot.)
.jpg)
-
@Wade Eva said:
Built this one last month. It's my take on a Farmer X. It's a SPECIAL one.Can you figure out what makes this one so SPECIAL? ;)
(Please excuse the dirty knife. Just pulled it from my pocket to shoot.)
Sweet two tone mod

-
@Wade Eva said:
Built this one last month. It's my take on a Farmer X. It's a SPECIAL one.Can you figure out what makes this one so SPECIAL? ;)
(Please excuse the dirty knife. Just pulled it from my pocket to shoot.)
Very nice [emoji8]☕️
Sent from my iPhone using Tapatalk
-
+1
-
@Wade Eva said:
Built this one last month. It's my take on a Farmer X. It's a SPECIAL one.Can you figure out what makes this one so SPECIAL? ;)
What doesn't make it special? So much niceness... even if it did apparently wake up with a bit of a hangover and put on 2 left shoes :)
Nice brass liners, and is that a brass spacer/keyring loop as well? Nice rivetting work, it must take a bit of courage to swing the hammer at an expensive red scale.
-
@Wade Eva said:
Built this one last month. It's my take on a Farmer X. It's a SPECIAL one.
Can you figure out what makes this one so SPECIAL? ;)
What doesn't make it special? So much niceness... even if it did apparently wake up with a bit of a hangover and put on 2 left shoes :)
Nice brass liners, and is that a brass spacer/keyring loop as well? Nice rivetting work, it must take a bit of courage to swing the hammer at an expensive red scale.
Exactly, the combo of scissors, brass liners, kooky crazy mismatched scales, and what I think is a genuine Victorinox clip? together the combo gives off "custom" along with a hint of vintage militaria kind of a feel. The patina would go nice with a worn drab canvas sheath.
It's kind of like certain types of muscle car builds, deliberate use of a primer-only finish but fancy engine, etc...certainly not off the shelf...BUT ALSO...in terms of functionality...sweet spot between size and number of implements, and an all metal build always feels like you can jump out of a helicopter with it. And this might sound weird but I like the peening, like the amount of facets vs smooth dome surface...and I like that you didn't go with torx for this look. Basically it looks hand hammered as if this is a 40's military item. .I always overlook scuffed up colored alox knives on ebay thinking I would want plain aluminum so the scuffs don't show...but when you do everything else rebuilt and clean, then they're like $400 ripped up rock'n'roll jeans. This would go nice with one of them silly right-angle flashlights with maybe an amber lens in it. Aluminum boyscout canteen...all set. And if you do drop it on the rocks...it's whatever. But you won't drop it cuz of that clip....
-
I know these guts posts aren't pretty but..technically it's showing off my mod right?
My plan to put the finer inline phillips (from 111mm Outrider) across from standard inline philips has been replaced with the notion of mounting it across from a nail file (from Sportsman) using a blades-layer spring...
The fine phillips is the thickness of scissors, looks to me that the blade spring is very very close to the same thickness.
I would use a liner WITHOUT the raised section for contemporary/thinner main blades, but instead a flat liner, so the phillips can take up the full thickness of the layer, and of course the spacer for the nail file...
This would allow large and pen blades in one layer then nailfile and fine phillips in another. But also there's the dilema of the rear tool, I'm guessing multipurpose hook, corckscrew and backside phillips are the only ones of (near)correct thickness.
Anybody know if something off the 58mm or 74mm knives would be the correct thickness to use as the backside tool? If not, are there any 91mm blade-layer springs without a back tool, like some 84mm models have?
It looks tight but it looks like it might close up perfectly...(less "rigged" than my previous idea)....I don't have a spare nail file so I'm mocking it up here with a small blade and the wrong liner...I think the nail file isn't as wide as the blade, perhaps leaving slightly more room for the phillips.

-
Thanks for the complements guys! Much appreciated.
What makes this one so SPECIAL is...............................
that I messed up and put the saw and scissors on the wrong sides. So the nail nick for the scissors is behind the saw! It's still accessible due to the bendy nature of the saw, but still! ::)
Anyway, it's my EDC and I really love it. I have and extra Cutlery Shopp Blue Farmer that's up next. Just need to make liners.
I can do smooth peened pins, but I like the hammered look. Just gives it some character. And yes, the key ring loop/spacer is brass.
The pocket dangler (clip) is home made. Stainless Steel baby spoon gave up the ghost for this one!
And the added benefit is that with the left over parts, I make a two toned Pioneer.
Finally, thanks to all the contributors to this site/forum. The wealth of knowledge is second to none and the professionalism is above par.
-
The wood is beautiful
Love how simple and elegant it is 
That's what she said...



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



