Structural Difference between Kf4 and CS4
-
Very hard to see them in the level of light i am in now but the
yellow is 0901 - both sides
grey is 0102 - both sidesI got another 2 and all 4 were bought from the same place .
-
I got another 4 KF4's yesterday and thankfully they were not fakes which i was worried about. 3 out of the 4 had the 3 springs on the serated blade side. The other one had the 2 springs. All marked USA. In my opinion this is a bad design as out of the 4 its the one with the 2 springs that has trouble. There screw drivers are not held closed properly and when i want to fold the pliers up, they just jam and lock. The plier tips get caught on the screw drivers. This i am sure is only because of the 2 back spring annomoly. I do not have this problem with the other 6 Juices i have.
-
That case full of Juices Bob has is pretty sweet

-
Wow, another great old thread. :)
Yes so after 4 years, two moves, and many miles, I just now dug my Juice kit out of the crate it's been packed away in. Here are a few more pictures of the translucent Kf4. The plastic scales are a bit thicker than the standard aluminum scales (not surprisingly) but they are smooth and have nicely rounded edges. The scales have the words LEATHERMAN and JUICE molded into them, but not the "Kf4" model number or the inch and metric scales like a normal Kf4 has.


Which leads me to believe there are other translucent Juice tools out there. With no model number, the same plastic injection mold used to make these scales could be used to make other scales in other colors. Molds are not cheap or easy to produce. If they went through the trouble to build the mold, surely they produced more than one set of scales with it...?

-
Those are lovely Bob

You are right surely there are more out there
Wonder what caused them not to go ahead and mass produce the plastic scales along with the aluminum ones ??? -
@Poncho65 said:
Those are lovely Bob

You are right surely there are more out there
Wonder what caused them not to go ahead and mass produce the plastic scales along with the aluminum ones ???Good question!
I have one idea though. It seems like it would be really easy for oil and crud to rub off the blades, come through the skeletonized frame, and get stuck on the backside of the see-through scales. :-\ In use, I bet in no time at all you would start to have yucky gack visible under the scales, and it would be almost impossible to clean. Kinda like what happens with the translucent-scale Micras. :PYah, I bet that's it. :-\ :-\
-
Those are lovely Bob

You are right surely there are more out there
Wonder what caused them not to go ahead and mass produce the plastic scales along with the aluminum ones ???Good question!
I have one idea though. It seems like it would be really easy for oil and crud to rub off the blades, come through the skeletonized frame, and get stuck on the backside of the see-through scales. :-\ In use, I bet in no time at all you would start to have yucky gack visible under the scales, and it would be almost impossible to clean. Kinda like what happens with the translucent-scale Micras. :PYah, I bet that's it. :-\ :-\
Yes that sounds very reasonable Bob :-\ nobody would want a bunch of gunk in there if you could see it :ahhh Still makes you wonder
Why they didn't make them non see through with plastic handles ??? They might have saw that as to close to a SAK perhaps
The world may never know :ahhh :D -
Great thread and even better information...thanks JSews and all the rest that have contributed to this one over a 7 year period!

It made me get my Juices out and learn a bit more about them. All have the 2/3 spring configuration. The S2 and KF4 have 1001 date codes, while the XE6 has a 1011 code.
Appreciate the information!

-
0801
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

