Suggestions needed please!
-
If you're willing to forgo spring loaded pliers and OHO, why not an MP600? I don't agree that modern Gerbers are bad. I'll put my 600's against all comers, they're absolute tanks. My 600's have been used HARD. A US Army issue one stays in my bag at almost all times.

-
@jerseydevil said:
If you're willing to forgo spring loaded pliers and OHO, why not an MP600? I don't agree that modern Gerbers are bad. I'll put my 600's against all comers, they're absolute tanks. My 600's have been used HARD. A US Army issue one stays in my bag at almost all times.
No doubt, the MP600 is good to go! (I was actually going to suggest it except for the spring loaded need - it has a great bit extension kit.) By modern, I meant recent designs like the MP1, Suspension, etc. which I don't care for. I have a relatively recently produced MP600 which is just fine. I just consider it an older design.

-
Ah, gotcha.
Actually one overlooked Gerber that is quite good is the Strata. Spring loaded, OHO, and can use either the Gerber or LM bit kit. Another tool I've used quite hard and never had an issue with. Combo blade though..... -
Thanks for the thoughts so far. Several models mentioned that I've looked into, but all require a compromise on what I want. Any suggestions that actually cover what I'm after? Don't wanna compromise if there is an option out there that has those features.
-
Welcome to

I Unfortunately don't have any of the tools in your list
But the suggestions above are from guys that use their tools and I would go with that 
-
Go with the oht! The LM bit driver extender actually does work with it. Just put it on the small flathear diagonally and it fits better than it does even on the screwdrivers it was meant for!


Sent from my iPhone using Tapatalk
-
Unfortunately spring loaded pliers is not looked on as much of an option here as non spring loaded pliers I am afraid

OHT and MP600 are two very good choices to me though

-
@gdoolittle said:
Go with the oht! The LM bit driver extender actually does work with it. Just put it on the small flathear diagonally and it fits better than it does even on the screwdrivers it was meant for!

Sent from my iPhone using Tapatalk
Oh and i just use the big flathead as a pry tool on mine. I dont lift boulders with it but it works fine for me
Sent from my iPhone using Tapatalk
-
Get MP1 it is the best Gerber MT ever made. My favorite. Much better than OHT, or any springloaded tool for that matter...
Love it. -
I forgot.. Welcome to the best place on the internet!
Sent from my iPhone using Tapatalk
-
Welcome! It's quite hard to find a tool with all those features, but I'm gonna put here a weird, unusual and inexpensive recommendation.
The Ganzo G301. Not as good as my LM, SOG, Gerber or Vics, but has all you want and the advantage of being cheap, shipped anywhere in the world.
Might not be as heavy duty as the MP600, or the MP1, or the OHT, its implements might be smakller than average and the tool itself is bulky and has much wasted space, but ticks all your boxes except for the prying tool.

I'd recommend any of the suggestions above before the Ganzo, though, if you can forgo some of your pre-requisites
-
Great, options to at least look into. And why is it that spring loaded pliers seem to be viewed so dimly around here?
-
@Edward M said:
Great, options to at least look into. And why is it that spring loaded pliers seem to be viewed so dimly around here?Generally speaking, internally-sprung pliers have a hollowed out part to accept the spring. This makes them weaker.
-
Additionally, sprung pliers are a gimmicks used by many cheapo brands to make them stand out more and seem special, even if the spring is horribly exposed.
Plus, as mentioned, they weaken the head, although whether it is enough to make a difference or not is open to interpretation.
And lastly, multitool pliers are designed to mimic standard pliers and most heavy duty pliers are not sprung.
Def
-
Ok, so it looks like the closest option in a decent quality tool is the Gerber MP-1. That would only sacrifice the OHO, which isn't too bit a deal. Any negatives about the MP-1?
-
@jerseydevil said:
Ah, gotcha.
Actually one overlooked Gerber that is quite good is the Strata. Spring loaded, OHO, and can use either the Gerber or LM bit kit. Another tool I've used quite hard and never had an issue with. Combo blade though.....How do you use the bit kit? I fail to see that option on Strata's page: http://www.gerbergear.com/Activity/Everyday/Tools/strata_31-000334
Also, the blade is PE and not combo?
Maybe this is the new design? -
@Edward M said:
Ok, so it looks like the closest option in a decent quality tool is the Gerber MP-1. That would only sacrifice the OHO, which isn't too bit a deal. Any negatives about the MP-1?I'd say that the bad thing is that you have to get the standard bits separately and the tool is usually pretty expensive in its own. Other than that it is a fantastic tool and every tool in it is good. Also it has no scissors, but usually those two blades are enough.
I love G10 handles on it, but some seem to dislike that material. I find it grippy enough even if you work in vaseline factory, then again without sheath G10 might tear up fabrics after a while, so careful if you just keep the tool in your pocket.
MP1 has some extra sideplay also on the handles, but that doesn't transfer on the plierhead. It has never been a problem with me.
-
This is good info, thanks. Now the problem is I can't find anyone in Sydney who stocks the MP-1.
How risky is it to order one from the US? I've read some reviews highlighting that some MP-1s have had quality issues and given they're so expensive I'm a little paranoid.
-
What I think abou tthe MP1:
/post/958918
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
