Favorite SAK/multitool combos
-
Sak Farmer and Skeletool is my combo
-
Just lately I've been pairing a LM Kick and a Vic Huntsman, they seem to cover almost anything I might need.
-
Here's a new SAK/Multi combo I tried out today. These two work great together!!

-
An awl would be a welcome addition to that combo...
This marks the first time in years that I can recall not carrying a 93mm knife in my pocket, BTW. I used to carry cellidor knives frequently, from childhood up until about 2008, but they seem bulky to me now--even just a 3-layer one like this.
-
@NutSAK said:
My tool EDC these days is almost always a combination of a SAK and a plier-based multitool. I find that this is very functional, because I can accomplish many smaller tasks with just the SAK, use the multitool for heavy duty tasks, or I can use the tools together for tasks that couldn't be accomplished with just one tool.I find it fun to come up with the combinations that work well together. What I am looking for when I do this is a SAK/multi combination that gives me a great deal of functionality without much redundancy in tools. Usually I categorize SAKs and multis as "urban" or "woods" (outdoor), and combine them as a matched pair--one of each type. I consider a "woods" tool one with an awl and a wood saw, and an "urban" tool as one with scissors, grooming functions, etc.
Below are photos of a few of my favorite combinations.
Leatherman KF4/Victorinox Golfer Special This is my most compact combination. Both tools are very small, but the tool combination here covers all the bases. I consider the KF4 the "woods" part of the combo, and the Golfer "urban".


Leatherman Pulse/Victorinox Farmer or OHT This is the combination I find myself carrying the most. This set is more "full sized" than the previous, but is still very compact for carry. The Farmer is the "woods" tool here (one of the best!), and I consider the Pulse an "urban" tool with its scissors and phillips screwdriver. If I feel that I need a corkscrew and don't mind going a little larger, I will substitute an OHT for the Farmer. Let's face it, the Pulse has one of the best files in the business....


Leatherman Wave/Victorinox Electrician Last but not least, I've been carrying this combo for a week or so and I'm liking it quite a bit. I could almost carry the Wave by itself and consider it "urban" and "woods" if it weren't for the glaring ommission of an awl! So, I combine it with an Electrician for very little redundancy in tools. I don't really consider an extra blade or two as redundant, especially when all the blades are of varying shapes and uses.


All your tools are extra new mint
Are they shelf queens, only displayed for picctures???
No chips. no cracks!!!?? :ahhh
-
Those were new tools at the time. That was 8 years ago. I will try to take some pics of the Farmer and Pulse again--there is a definite difference with the Pulse. The Farmer looks pretty much the same--that hard anodized finish is very tough. I use that Farmer more than anything else.
I do take good care of my tools though, and multitools to me are for times when I don't have real tools around to get the job done, or in a survival situation. You won't ever see me turning a nut or bolt with a plier if I have a wrench within a reasonable distance. LIkewise, if I'm in the woods I usually have a hatchet or portable saw with me, so I'm not going for the little saw on my MT first.
Keep in mind also that I never said I carried these particular tools... I have 5-6 SAKs and 2-3 plier-based multitools that I frequently carry, and I have MANY more in my collection. This was just an exercise in pairing, for the most part. In most cases, I substituted mint tools in the pics for tools that I actually use so the pics would look nicer. There is a huge difference in the appearance of the Wave I use vs that 25th Anniversary Wave in the picture that is still MIB. It sure looks pretty though, doesn't it? :D
The tools I use most frequently:
Victorinox Farmer
Victorinox Soldier
Victorinox Cybertool 29
Victorinox Cybertool 31
Victorinox RamblerLeatherman Skeletool
Leatherman Pulse
Leatherman ST200
Leatherman Wave -
I remember this thread from back in the day and it reinforced my Pulse and Electrician Plus combo carry
I still carry it some now and it is the same tools that I carried all the way back then 
I always loved this thread and am glad to see some of the people in here
Great thread Terry 
Good to see some new combo as well

-
Thanks! Yeah, I thought I'd drudge this one back up again... I miss the 'ol stump at my last house BTW. It was a Silver Maple, so I suppose it is probably rotted out by now.

Oh, and of course I meant CT34 above... ::)
-
@NutSAK said:
Those were new tools at the time. That was 8 years ago. I will try to take some pics of the Farmer and Pulse again--there is a definite difference with the Pulse. The Farmer looks pretty much the same--that hard anodized finish is very tough. I use that Farmer more than anything else.I do take good care of my tools though, and multitools to me are for times when I don't have real tools around to get the job done, or in a survival situation. You won't ever see me turning a nut or bolt with a plier if I have a wrench within a reasonable distance. LIkewise, if I'm in the woods I usually have a hatchet or portable saw with me, so I'm not going for the little saw on my MT first.
Keep in mind also that I never said I carried these particular tools... I have 5-6 SAKs and 2-3 plier-based multitools that I frequently carry, and I have MANY more in my collection. This was just an exercise in pairing, for the most part. In most cases, I substituted mint tools in the pics for tools that I actually use so the pics would look nicer. There is a huge difference in the appearance of the Wave I use vs that 25th Anniversary Wave in the picture that is still MIB. It sure looks pretty though, doesn't it? :D
The tools I use most frequently:
Victorinox Farmer
Victorinox Soldier
Victorinox Cybertool 29
Victorinox Cybertool 31
Victorinox RamblerLeatherman Skeletool
Leatherman Pulse
Leatherman ST200
Leatherman WaveI think, for me, is more interesting to see real users than shelf queens...
If you talk about more frequent combos it has no sense to post pictures of shelf queens
Just my opinion ???
-
Those were new tools at the time. That was 8 years ago. I will try to take some pics of the Farmer and Pulse again--there is a definite difference with the Pulse. The Farmer looks pretty much the same--that hard anodized finish is very tough. I use that Farmer more than anything else.
I do take good care of my tools though, and multitools to me are for times when I don't have real tools around to get the job done, or in a survival situation. You won't ever see me turning a nut or bolt with a plier if I have a wrench within a reasonable distance. LIkewise, if I'm in the woods I usually have a hatchet or portable saw with me, so I'm not going for the little saw on my MT first.
Keep in mind also that I never said I carried these particular tools... I have 5-6 SAKs and 2-3 plier-based multitools that I frequently carry, and I have MANY more in my collection. This was just an exercise in pairing, for the most part. In most cases, I substituted mint tools in the pics for tools that I actually use so the pics would look nicer. There is a huge difference in the appearance of the Wave I use vs that 25th Anniversary Wave in the picture that is still MIB. It sure looks pretty though, doesn't it? :D
The tools I use most frequently:
Victorinox Farmer
Victorinox Soldier
Victorinox Cybertool 29
Victorinox Cybertool 31
Victorinox RamblerLeatherman Skeletool
Leatherman Pulse
Leatherman ST200
Leatherman WaveI think, for me, is more interesting to see real users than shelf queens...
If you talk about more frequent combos it has no sense to post pictures of shelf queens
Just my opinion ???
Some people would like to see a more rare tool than the regular version though because a lot of people have the regular version and not as many have anniversary tools
I like seeing tools period for example :D -
@alexTOOL said:
I think, for me, is more interesting to see real users than shelf queens...If you talk about more frequent combos it has no sense to post pictures of shelf queens
Just my opinion ???
You're certainly entitled to your opinion. To me, it makes no difference whether the pictures show shelf queens or my users. Whether the picture is of my beat-up users or collector's items/shelf queens, I liked those combos for carry regardless and that's what this topic is about. Many MTO members are users and collectors (such as myself) and like to see the rarer tools that they don't see every day.
So, what SAK/multitool combos do you like to carry? I think this topic would be more interesting if people added to the discussion rather than commenting on the pictures. Just my opinion. ??? ;)
-
For me the list of implements I want most are: blade, scissors, drivers (phillips and flat), pliers, and then any other "would be nice" options. I enjoy finding pairings with the least redundancy (redundancy is handled by bag or car kits). So my two most carried combos are:
Pioneer with Style PS - Keeps most of the same implements from, say, a Deluxe Tinker, but in two very slim tools.

Pioneer X (or "Super Cadet" mod) with Skeletool - better pliers and scissors, and add bit driver compared to first pair, lose nail file and tweezers

Aside from those two, for bag carry I'll pair a Wave and Pioneer (mainly just need the awl from the Pioneer), or Vic Hercules and LM Crunch.
-
The charge and pioneer X work well for me! I like having the bigger scissors on the X plus that awl.
Sent from my iPhone using Tapatalk
-
@eddie1115 said:
For me the list of implements I want most are: blade, scissors, drivers (phillips and flat), pliers, and then any other "would be nice" options. I enjoy finding pairings with the least redundancy (redundancy is handled by bag or car kits). So my two most carried combos are:Pioneer with Style PS - Keeps most of the same implements from, say, a Deluxe Tinker, but in two very slim tools.

Pioneer X (or "Super Cadet" mod) with Skeletool - better pliers and scissors, and add bit driver compared to first pair, lose nail file and tweezers

Aside from those two, for bag carry I'll pair a Wave and Pioneer (mainly just need the awl from the Pioneer), or Vic Hercules and LM Crunch.
Not having the Hercules myself I would still think that it sounds like a very good combo with the Crunch

-
For me the list of implements I want most are: blade, scissors, drivers (phillips and flat), pliers, and then any other "would be nice" options. I enjoy finding pairings with the least redundancy (redundancy is handled by bag or car kits). So my two most carried combos are:
Pioneer with Style PS - Keeps most of the same implements from, say, a Deluxe Tinker, but in two very slim tools.

Pioneer X (or "Super Cadet" mod) with Skeletool - better pliers and scissors, and add bit driver compared to first pair, lose nail file and tweezers

Aside from those two, for bag carry I'll pair a Wave and Pioneer (mainly just need the awl from the Pioneer), or Vic Hercules and LM Crunch.
Not having the Hercules myself I would still think that it sounds like a very good combo with the Crunch

Yeah, it seems to be a really good fit. I had an Outrider instead for a while, but the small SAK pliers are a nice addition to the bigger, locking Crunch pliers.
-
Nice combos Eddie!

-
Since I got mt Vic Champion I have been carrying it everyday
I have only had it a couple weeks though ;) I have paired it with my Sypertool 300 til today ( a bit overkill I know but I have been very prepared :D ) and I carried it with my Rebar today
Plenty of tool overlap but being slimmer than my Swisschamp I love this knife 
-
I have a couple of Hoffritz Champions. One of them is a user that I've carried on a few occasions in a Zermatt pouch or the Skinth that I carry a CT34 in daily to the office.
In the past I was a huge advocate for the phillips/mag layer bit I've gotten away from it in recent years, preferring the bit driver in the Cybertools. Now that I think about it, the LM Mini Tool would be a great companion to the Champion, and the pair would offer many more tool options than just the CT34 alone.

I just bought my first Rebar off the 'bay this morning. I look forward to looking for the right SAK to pair it with. Something simple with scissors, probably...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login