swissbianco copper scales?
-
I've been eyeing these too. Great to see them installed. Could maybe drill and countersink them and use the screw-together pivots like all these alox mods I see here. Would still need to use the outer liners/plates of course.
If these came with a copper-headed tweezers....oh man... I'd pay $10 extra for that.
-
Those certainly do look nice.

-
@JamesJ said:
I've been eyeing these too. Great to see them installed. Could maybe drill and countersink them and use the screw-together pivots like all these alox mods I see here. Would still need to use the outer liners/plates of course.You could, but that's a whole different ball-game! I just wanted to slap on a new set of scales, and these are a relatively cheap and very simple way to do it. Turned a tired old knife into something quite nice :)
-
Here's an Explorer with copper handles. Bought complete from SwissBianco. Too new to be developing patina. Personally I'd prefer some coating to retain the bright copper color.
-
Nice :)
22:35 BST on 2nd August 2016 - No change.
-
Follow up questions for you guys, if you don't mind.
Any problems with the snap-in fit?
These the same width & weight as the regular scales?
-
I've been eyeing these too. Great to see them installed. Could maybe drill and countersink them and use the screw-together pivots like all these alox mods I see here. Would still need to use the outer liners/plates of course.
You could, but that's a whole different ball-game! I just wanted to slap on a new set of scales, and these are a relatively cheap and very simple way to do it. Turned a tired old knife into something quite nice :)
Well ya know, there's ideas I have vs. the things I actually do, and I could see myself bonding them on there as soon as they arrived. "I can always mod it later" and then I just leave it as is.
Did you abrade the surfaces before bonding them together?
-
@ColoSwiss said:
Here's an Explorer with copper handles. Bought complete from SwissBianco. Too new to be developing patina. Personally I'd prefer some coating to retain the bright copper color.I'd be ok with owning one of these!
-
@DwrightKM said:
Follow up questions for you guys, if you don't mind.Any problems with the snap-in fit?
These the same width & weight as the regular scales?
They don't snap-in - you need to stick them on. As I say, I did need to work at the pins and bushings on mine, and they are not 100% flush with the scales all the way around, I'm sure in part that the liners on my old knife were partly responsible for that though. It was not a new SAK - it's had a tough life :D
They are the same size as regular scales, but they weigh an absolute ton. Well maybe not a ton, but they're heavy...
-
Follow up questions for you guys, if you don't mind.
Any problems with the snap-in fit?
These the same width & weight as the regular scales?
They don't snap-in - you need to stick them on. As I say, I did need to work at the pins and bushings on mine, and they are not 100% flush with the scales all the way around, I'm sure in part that the liners on my old knife were partly responsible for that though. It was not a new SAK - it's had a tough life :D
They are the same size as regular scales, but they weigh an absolute ton. Well maybe not a ton, but they're heavy...
Good stuff. Appreciate the info. Thanks!
-
Follow up questions for you guys, if you don't mind.
Any problems with the snap-in fit?
These the same width & weight as the regular scales?
They don't snap-in - you need to stick them on. As I say, I did need to work at the pins and bushings on mine, and they are not 100% flush with the scales all the way around, I'm sure in part that the liners on my old knife were partly responsible for that though. It was not a new SAK - it's had a tough life :D
They are the same size as regular scales, but they weigh an absolute ton. Well maybe not a ton, but they're heavy...
Good stuff. Appreciate the info. Thanks!
No problem - I hope it helps :)
FWIW, I really like the extra weight. Makes it feel almost hefty :)
-
I like that you have 2 Crunches ready to go, gotta have 2 for times just like this!
-
Purely AWESOME , Lord Corporation!

Can't wait to see the Patina :ahhh
I have a old sheet of Copper I found in a field, that I shoot knife pics on...... Love the LOOK! 8) -
@cali-SAK-attack said:
Purely AWESOME , Lord Corporation!
Can't wait to see the Patina :ahhh
I have a old sheet of Copper I found in a field, that I shoot knife pics on...... Love the LOOK! 8)Lovely stuff isn't it, copper?
-
If anyone was curious.
The copper scales weight 67gm and the regulars are 10gm.
This is according to the Bay seller I messaged. So roughly 2oz.
I'm still very tempted :)
-
Hi guys, new to the forum. My experience with Roger's scales (SwissBianco) was different than some of the others. Mine snapped in.
I too wasn't really sure how to install these things when I first got them and ironically I found SwissBiancos's YouTube tutorial on how to change out the plastic scales. Being ignorant to the whole process, it didn't occur to me that the Cu scales would go on any differently than the plastic ones.
On the video, he recommends using a small vice with padded jaws to install the plastic scales. Again being ignorant, I figured Cu being metal, I didn't need a vice since there's no way the scales would crack.
So...I made sure I had the orientation correct for both sides, carefully placed one side down on a hard surface, and put my weight into it like I was giving CPR.
The bottoms scale snapped in. I turned it over and did the same thing to the other side...done. It took me longer to find and watch the video.
Here are some pics...I like Cu..can you tell. The SAK is a Mountaineer Lite IIRC. The second set I'm going to put on a SwissChamp. Maybe I'll do a YouTube video on that one...or maybe I just lucky with this set, IDK. Clearly the scales haven't patina'ed that much yet, it'll be very cool when it does. All of my patina has been natural...nothing forced. Hope this helps




Sent from my iPad using Tapatalk
-
@Jiman said:
Hi guys, new to the forum. My experience with Roger's scales (SwissBianco) was different than some of the others. Mine snapped in.I too wasn't really sure how to install these things when I first got them and ironically I found SwissBiancos's YouTube tutorial on how to change out the plastic scales. Being ignorant to the whole process, it didn't occur to me that the Cu scales would go on any differently than the plastic ones.
On the video, he recommends using a small vice with padded jaws to install the plastic scales. Again being ignorant, I figured Cu being metal, I didn't need a vice since there's no way the scales would crack.
So...I made sure I had the orientation correct for both sides, carefully placed one side down on a hard surface, and put my weight into it like I was giving CPR.
The bottoms scale snapped in. I turned it over and did the same thing to the other side...done. It took me longer to find and watch the video.
Here are some pics...I like Cu..can you tell. The SAK is a Mountaineer Lite IIRC. The second set I'm going to put on a SwissChamp. Maybe I'll do a YouTube video on that one...or maybe I just lucky with this set, IDK. Clearly the scales haven't patina'ed that much yet, it'll be very cool when it does. All of my patina has been natural...nothing forced. Hope this helps




Sent from my iPad using Tapatalk
Welcome to the forum, and what a great start it is!

Love those copper scales, and that copper flashlight is


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
