Newbie modding SAKs
-
Next project : Ti-Rambler
(i'm using scales i started to make during previous project)
disassembling :
the parts:
drilled a [bigger] bevel:
pre-pinning the rivets:
-
Looking good


-
Looking good


sadly next steps might be in a few weeks, i won't be able to finish it before

I'll be waiting

-
Awesome work...
I've always wanted to do through peening work on 58mm series... How much excess do we need to leave out? Have only done 91mm peening with the bushings in place and always leave 1mm for peening..
Sent from my iPhone using Tapatalk
-
I left a little less than 1mm iirc on previous build,
But, with the bevel I might need a little more to get the V shape in the scale and still a rounded tip
I'll tell you after this one :DBTW, 1.6mm diameter rod is a little thinner than the holes (like 1.65mm?) Which gives some smoothness (some might say a beginning of wobble)
-
DIY of the day: Ti pocket clip
Hammered and flame-anodized titanium
Thank to Syph007 for bending tip

-
@m47mu74nt said:
DIY of the day: Ti pocket clip
Hammered and flame-anodized titaniumLooks awesome [emoji8][emoji8][emoji8]
Sent from my iPhone using Tapatalk
-
Thanks!
-
Nice clip! I like the finish on it.

-
-
Here is the Ti Rambler assembly:
(yeah i skipped the scale making part and anodizing/oxidizing -flamed his time-)Major issues: There are some scratches on the scales i couldn't erase, and I reversed the file, it looks towards the Ti scale
(everything was already pinned when I saw it
)I also
tried tomade a pocket clip, -two as the first broke during cold bending-unbending-bending- ...
Everything is oxidized to light blue and some shades around (deep violet - yellow) -
@m47mu74nt said:
Flame anodizing is fun, but what about playing with electricity and lemon juice?Here is a test :
- 40V, using an old Epson printer PSU, (12V from computer PSU gives a nice bronze/gold)
- Some cotton dipped in Lemon juice as electrolysis solution
- The + is connected to the scale, the - clamped to the cotton
- The scale is wiped with the cotton a few time until the color is the one desired (this technique at 40V gives a random pattern between gold, deep-violet and light blue)
Awesome tip&instructions!

-
Flame anodizing is fun, but what about playing with electricity and lemon juice?
Here is a test :
- 40V, using an old Epson printer PSU, (12V from computer PSU gives a nice bronze/gold)
- Some cotton dipped in Lemon juice as electrolysis solution
- The + is connected to the scale, the - clamped to the cotton
- The scale is wiped with the cotton a few time until the color is the one desired (this technique at 40V gives a random pattern between gold, deep-violet and light blue)
Awesome tip&instructions!

Very nice work


-
@m47mu74nt said:
Here is the Ti Rambler assembly:
(yeah i skipped the scale making part and anodizing/oxidizing -flamed his time-)Major issues: There are some scratches on the scales i couldn't erase, and I reversed the file, it looks towards the Ti scale
(everything was already pinned when I saw it
)I also
tried tomade a pocket clip, -two as the first broke during cold bending-unbending-bending- ...
Everything is oxidized to light blue and some shades around (deep violet - yellow)Major Issues!

-
Yes Major
, as it is a gift for a friend 
btw I also flamed my first clip again to get that nice blue as on the Rambler, it looks much nicer than bronze/violet now
-
I use it daily for now (and it's not going to change soon)
So here is a picture under the Alps sunlight: -
@m47mu74nt said:
I use it daily for now (and it's not going to change soon)
So here is a picture under the Alps sunlight:Nice


-
Why do people (and me too) like Titanium so much?
-
It screams to deaf when you cut it with hacksaw
-
It wears your hacksaw as much as it gets cut
-
It blinds you when you burn it with its bright flame
-
It breaks your drill bits
-
It is a pain to grind
-
It gets scratched when you look at it
-
It breaks when you want to bend it
-
It bends when you want to break it
But
- It has so lovely colors and is tougher and lighter than its steel equivalent
I made three [four] more clips:
(old one is the second from the left)
One broke (again)
-
-
@m47mu74nt said:
Why do people (and me too) like Titanium so much?- It screams to deaf when you cut it with hacksaw
- It wears your hacksaw as much as it gets cut
- It blinds you when you burn it with its bright flame
- It breaks your drill bits
- It is a pain to grind
- It gets scratched when you look at it
- It breaks when you want to bend it
- It bends when you want to break it
But
- It has so lovely colors and is tougher and lighter than its steel equivalent
I made three [four] more clips:
(old one is the second from the left)
One broke (again)
Easy...
Spoiler:
It begins with "Tit"...
:D :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login