The Utility Knife.
-
I was just gonna say that it reminds me of a Gerber, even new ones.
That one does look cool and the ergot look nice too.
-
That gerber is cool
-
Simplicity.
Not my pic

-
-
Hey Dan, I've been collecting utility knives for the past few years and find them not only practical but a real blade-saver

Super collection there :D
-
Thanks. When do we get to see the photos sawman?
-
Sure thing. I have others including some duplicates, but as mine are mostly users they are scattered about the house and garage.
-
Here's mine

-
Thanks for sharing. I do love to see utility knives.

-
Good stuff guys!!!
-
-
Here's a couple of mine (the smaller ones). They use different blades. Holed ones in the Craftsman and two top-nicked ones in theTengtools.
Tengtools has a slide-lock, keeps it closed and open. Also a small plastic safety cap for the blade. The red slide lock is to release the blade.
The Craftsman only has an open lock but has a thumb stud opener. To change the blade, you rotate the top of the "head" forward and then slide the side down.



-
Here is the Valet Auto Strop Razor Utility Knife. Valet was a company that made safety razors in the early 20th century, using a proprietary blade very similar to the now generic GEM style blade. Valet blades can occasionally be found, but AFAIK haven't been manufactured in decades. However, the generic GEM style single edge blade/scraper is common and will fit after removing the folded spine.
When I found this, it was without a blade, so I supplied a used GEM carbon steel blade, too dull to shave with, but plenty sharp for anything else. Just pried off the spine and it fit perfectly. closed, these are about 2.5" long, a little more than 4.25" fully opened, including bail. A little more than .75" wide, and a bit over 1/8" thick. It's a friction folder, stamped metal construction, completely non magnetic metal, without a blade. Don't know what it is. Maybe some kind of non magnetic stainless or nickel silver? On both sides, a decorative pattern is embossed on the handle, with a space reserved for engraving. A hole in the handle which I presume is a cigar cutter function. On the very tip of the blade holder there is a triangular pointy protrusion, not sure if it has a specific function. On one side of the blade holder, it says "VALET AUTO STROP RAZOR UTILITY KNIFE", and the reverse side says "AUTO STROP SAFETY RAZOR Co NEW YORK LONDON TORONTO"
This is kind of a nifty little device, more in the vein of a a gentleman's knife than box cutter, but I think it deserves mention here. I don't really carry it, as I'm a bit afraid I'll nip off the tip of a finger in the cigar cutter when closing it. Looks like it would be a very easy thing to do. But it is a pretty neat device.
-
Here's a couple versions of the Olfa Craft Knife. These are very similar in shape to traditional Japanese kiridashi/kogatana knives, which I think are used a lot in woodworking. These offer replaceable blades, though they're heavier than the trapezoid blades used in common utility knives, .045"-.050" thick stainless steel. While not chisel ground, the edges are ground asymmetrically. Replacement blades are about as easily found as whole knives. The smaller one has a dual edge reversible blade.
-
One of these was posted earlier. Stanley 10-049, which they call a "Pocket Knife". It features a locking folding, replaceable blade, available in two styles, a sheepsfoot point, and a more acutely tipped version. These have been around for a few decades, though I have no idea how long, exactly. These are three iterations of the same model. The top one is how they currently are made, cast metal handles with a logo, model number and a grip pattern molded in, and painted gray. The two below are older versions, also cast metal, but smooth plated exteriors. Though overall design has stayed the same and blades are compatible, there are minor differences in construction. The internals are plastic. One of the older models is slightly thicker and will hold a spare blade inside.
I think these are kind of neat pocket knives, really unlike just about any other on the market. Replacement blades aren't too hard to find, though there's no reason you can't keep these sharpened. Blades are about .045" thick.
Stanley used to make a knife that took a similar, but incompatible blade. It was a "funny folder" "flip knife". Unfortunately I don't have one, and they seem to be kind of collectible these days. I don't think it's been made for at least 20 years. The replacement blades were sold until at least a few years ago.
-
The old fashioned Stanley retracting blade is still a widely copied, tried and true kind of the hill. Presented here is a very cheap, but usable copy, the Model 99, and what I think is a fairly recent model 10-016, which is my favorite. The 10-016 is about an inch shorter and significantly thinner than a model 99, making it easily pocketable, with the same practicality as the 99. Unfortunately, they can be hard to find. When I first found them, they were bare cast metal. Current ones are painted cast metal. Just like the 99, it's made in USA.
-
Here are a few small, keychain sized utility knives. An Olfa Touch Knife, and a couple that seem to be a Chinese domestic brand, Deli. These are auto-retracting knives, but have provision for holding the blades fully extended. These tend to be sort of disposable, easily pocketed and inexpensive... if you can find them in the right retail conditions. The Olfas aren't too uncommon in the US, but if you buy them online, it seems they can be a bit overpriced. The Deli knives are found from some China vendors, and should be even cheaper. The Olfa has a stainless blade, the Delis have carbon steel blades.
-
This is the subject of one of Grant Lamontagne's Fantastic $5 Challenge thread. This is a rather attractive, if fatally flawed, multitool box cutter that is widely available from China sources, usually carrying the "Paperknives E.D.C." name. It seems to be a copy of the Rexford Rut. I wrote a review in that thread.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

