Leatherman PST chronology project
-
@hugos said:
Thanks Gents, it came with a lot of play on the plier head, but LM replaced it with a new one, as well as a new blade. I then took it apart and cleaned it. Now one of my prized collection pieces, and Friday carry.Sent from my iPad using Tapatalk
Glad they could sort it out for you
and that it's in your EDC rotation 
-
Just picked this bad boy up today...
• Rivets or knurled screws?
Knurled• Lanyard attachment?
Yes• (Old) small diameter or (new) large diameter plier pivot?
Small diameter• LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL?
LEATHERMAN USA• A hard wire cutter notch?
No• Handles stamped with what? (see pictures in next post for examples)
One side of first handle stamped: LEATHERMAN TOOL, PORTLAND OR REG’D TM 1325473. The reverse side of this handle is blank.
The other handle is blank.• Inch ruler only, or inch/metric?
Inch / Metric• Date codes?
0493 on one handel only (knife blade side)• Drop point knife blade or clip point? (saber?)
Saber• Knife blade tang stamped LEATHERMAN alone? Or with USA? Or JAPAN?
LEATHERMAN USA• Screwdrivers: pivot-in or pivot-out?
This is a BO PST without cap crimper.
Pics to come shortly...
Cheers,
CB -
@Chinese Buffet said:
• Date codes?
0493 on one handle only (knife blade side)This is a BO PST without cap crimper.
I'm sure on 100% other (file) handle also has date code.
It's maybe bad visible, but it there is :)
You may try to wipe the internal surface of the handle.I had a SS PST which David has now
That only had a datecode in one handle and this one would be in the date range where they might have been a few non dated handles still left in the bin 
-
@Chinese Buffet said:
Photos as promised...





Tool is old but seems like it wasn't used much or at all.
@wowaboro: Do you think it is possible that the BO coating covered the date?
CB
It is possible that the BO coating is hiding the date code but they only started putting the dates on them a little while prior to this

A very nice example you have there 8)
-
@Poncho65 said:
I had a SS PST which David has now
That only had a datecode in one handle and this one would be in the date range where they might have been a few non dated handles still left in the bin 
I still have that one Poncho! In fact its in front of me at the moment the date code in the knife blade handle is 0393. I have another stainless one that is 1292 in knife blade handle and no date code in the other. Date codes were started in late 1192. It wouldnt be unusual to have handles with and without on the same tool from that time period. :)
-
@David said:
I have another stainless one that is 1292 in knife blade handle and no date code in the other. Date codes were started in late 1192. It wouldnt be unusual to have handles with and without on the same tool from that time period. :)Yes, factory produced "One handle date" PSTs may have 1192 or 1292 code only.
If some PST has other date code on one handle only, it's means that item was repaired etc. -
I have another stainless one that is 1292 in knife blade handle and no date code in the other. Date codes were started in late 1192. It wouldnt be unusual to have handles with and without on the same tool from that time period. :)
Yes, factory produced "One handle date" PSTs may have 1192 or 1292 code only.
If some PST has other date code on one handle only, it's means that item was repaired etc.Is that a fact from LM or a hypothesis of yours
they pick the parts from a big bin and I can guarantee that some of the handles without dates would have been in the bottom for a few to several months ;) If I remember correctly that PST was period correct with everything of an early 90's PST 
-
Yes, factory produced "One handle date" PSTs may have 1192 or 1292 code only.
If some PST has other date code on one handle only, it's means that item was repaired etc.Is that a fact from LM or a hypothesis of yours

It's a fact. One handle dated PSTs (1192 or 1292) - it's transitional modification between both undated handles and both dated handles modifications.
-
Yes, factory produced "One handle date" PSTs may have 1192 or 1292 code only.
If some PST has other date code on one handle only, it's means that item was repaired etc.Is that a fact from LM or a hypothesis of yours

It's a fact. One handle dated PSTs (1192 or 1292) - it's transitional modification between both undated handles and both dated handles modifications.
So your saying they threw out all the undated handles that were already made just to make sure that they had dates in both handles ???
I wouldn't think they would spend the time sending them back through just to put a date on them if they didn't have one

Have you emailed them and asked them this ??? :D
-
It's a fact. One handle dated PSTs (1192 or 1292) - it's transitional modification between both undated handles and both dated handles modifications.
So your saying they threw out all the undated handles that were already made just to make sure that they had dates in both handles ???
I wouldn't think they would spend the time sending them back through just to put a date on them if they didn't have one

Have you emailed them and asked them this ??? :D
I don't know what happened on LM factory and what they thought about :D
But all what I wrote above just a fact :) -
I'm going to need some help with this one....
I just got a JPST and it doesn't really fit any of the categories.
It's got the hollow rivets of a 3 (I think....this is my first hollow rivet PST)
It's has the lanyard attachment of a 4 and 5.
The knife blade is only stamped Leatherman.
It's got a right-hand cut can opener.
It's got staked plier pivots, and the plier head only says Leatherman.
It's has the handle stampings of a 5.

So, what do the gurus think?
-
I know it is a very nice looking old PST

-
@Aberdrew13 said:
I'm going to need some help with this one....I just got a JPST and it doesn't really fit any of the categories.
It's got the hollow rivets of a 3 (I think....this is my first hollow rivet PST)
It's has the lanyard attachment of a 4 and 5.
The knife blade is only stamped Leatherman.
It's got a right-hand cut can opener.
It's got staked plier pivots, and the plier head only says Leatherman.
It's has the handle stampings of a 5.I don't know how about 3,4,5 etc, my own JPST classification now counted 19 pcs ;)
Yours item is #16 (US REG’D TM 1325473, hollow rivets, lanyard attachment, LEATHERMAN on blade tang). -
@Aberdrew13 said:
I'm going to need some help with this one....I just got a JPST and it doesn't really fit any of the categories.
So, what do the gurus think?
I'm not sure I'm qualified to be an official MTo "guru" but according to my version of the PST classification system I'd call that an early hollow rivet JPST v5. All my v3 and v4 JPSTs have "hollow" rivets, and 3 of my 16 v5 JPSTs also have hollow rivets, so my theory is that fairly early in the production of v5 JPSTs they stopped staking the back side rivets, and from then on all v5 JPSTs had solid rivets (and this is by far the most common variant of JPSTs). Of course I could be wrong ;)
Congratulations on having a fairly rare variant JPST.
-
Thanks for sharing some knowledge with me guys.
I've also got a 5, so I was a little surprised at the similarities and differences.
Here's to tracking down some more!

-
Another interesting PST, which I haven't seen before:


This is standard modification with stamps on handles: POCKET SURVIVAL TOOL / LEATHERMAN TOOL / US PAT 4238862 / PORTLAND OR and cast on pliers head: LEATHERMAN USA, but... with Hollow Screws on pivots.
I couldn't resist and immediately bought it :) -
@wowaboro said:
Another interesting PST, which I haven't seen before:This is standard modification with stamps on handles: POCKET SURVIVAL TOOL / LEATHERMAN TOOL / US PAT 4238862 / PORTLAND OR and cast on pliers head: LEATHERMAN USA, but... with Hollow Screws on pivots.
I couldn't resist and immediately bought it :)Good find
Most of these very early PSTs with hollow screws seem to have "Leatherman" only pliers (the ones I've had a chance to look closely at, anyway), so this one may have been built at a transition time while they were still doing hollow screws, but were changing over to the "Leatherman, USA" pliers (as on all the later US PSTs). -
@gregozedobe said:
Most of these very early PSTs with hollow screws seem to have "Leatherman" only pliersI have one Cabela's stamped PST with hollow screws and "LEATHERMAN USA" on pliers.
But you're right, Greg, most of hollow screws PSTs has pliers with "LEATHERMAN" only
And some strange eBay auction, мaybe I missed something

Why this standard PST sold as expensive?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






