Monrogue's Realm
-
I think only if you rounded the back even more. If you removed too much from the front of the notch it would cause the file to open too far but I don't think it would affect the lock up. If you look at my picture you can see I purposely created a nice 90 degree angle at the back of the notch. That is where the lock engages.
I also noted that the Rebar file notch was a little undersized on mine. I opened it up a bit and now have a better lock than from the factory. So I think unless you went past your tracing lines from the rebar file you are probably still slightly undersized in your notch.
Maybe you can take a picture of your file when you get home. Or at least compare it to my pic.

-
I have to admit that I was a bit nervous about checking out this Realm, but I'm damn glad I did!!!
Mondizzle is for rizzle yo!!
-
Good stuff Monrouge

-
I'll have to check it out. Probably will whenever I decide to swap it with the knife blade, if I do. I'm not a fan of taking all the tools out as it can be a pain to get them back in. I may try tomorrow. I checked it out, and it does look like the back of the notch may be slightly rounded.
Sent from my SM-G920R4 using Tapatalk
-
-
Well I straightened out the back area of the lock notch on the file. Forgot to get a pic though. It now stays locked, but there is considerable play unfortunately. Not a big deal functionally I don't think, but it bugs me nonetheless. Everything is tight in that handle too, and I have to deploy the file to easily get the middle tools out. They're almost nail breakers if I don't. Oh, and I swapped the knife and file, so the file does deploy more easily as I have a better grip on it, and the knife deploys just fine as well.
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160806_183317_zpsmt85meas.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160806_183317_zpsmt85meas.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160806_183302_zpsito3wceh.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160806_183302_zpsito3wceh.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160806_183351_zpskd7tjdjn.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160806_183351_zpskd7tjdjn.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160806_183442_zpsovgidpgr.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160806_183442_zpsovgidpgr.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Notice the slightly thicker handle on the right.
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160806_183418_zpsbgjwieah.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160806_183418_zpsbgjwieah.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Here's a beauty I haven't brought out in a few months :)
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160806_175830_zpst7tc7dza.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160806_175830_zpst7tc7dza.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160806_175744_zpskpysgl9h.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160806_175744_zpskpysgl9h.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Shouldn't there be an OC badge?


-
@Monrogue said:
Well I straightened out the back area of the lock notch on the file. Forgot to get a pic though. It now stays locked, but there is considerable play unfortunately. Not a big deal functionally I don't think, but it bugs me nonetheless. Everything is tight in that handle too, and I have to deploy the file to easily get the middle tools out. They're almost nail breakers if I don't. Oh, and I swapped the knife and file, so the file does deploy more easily as I have a better grip on it, and the knife deploys just fine as well.
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160806_183317_zpsmt85meas.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160806_183317_zpsmt85meas.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160806_183302_zpsito3wceh.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160806_183302_zpsito3wceh.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160806_183351_zpskd7tjdjn.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160806_183351_zpskd7tjdjn.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160806_183442_zpsovgidpgr.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160806_183442_zpsovgidpgr.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Notice the slightly thicker handle on the right.
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160806_183418_zpsbgjwieah.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160806_183418_zpsbgjwieah.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Glad to see that you swapped them and it is working out for you

-
Thanks Poncho :)
-
Glad you got it worked out as well M
Too bad about the play and that the tools are hard to deploy. Maybe you can find a happy medium between easier deployment and the wiggle of the file.Anyway good for you for going for it, that's how we gain confidence and learn

-
Thanks Steve :) I am happier with the easier access to the file at least. My MT need/use is low normally, so it really shouldn't be a big deal.
-

Is that a nail nick I see you added... nice touch

-
Carrying one I haven't in a while, the Reave. It's a hybrid, sort of the best of both LM worlds so to speak
It's fairly light too, which is nice.
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160808_095236_zpslswlcusb.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160808_095236_zpslswlcusb.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Don't fear the Reave(r) More cowbell please.
-
@Monrogue said:
Carrying one I haven't in a while, the Reave. It's a hybrid, sort of the best of both LM worlds so to speak
It's fairly light too, which is nice.
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160808_095236_zpslswlcusb.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160808_095236_zpslswlcusb.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>I need to get a second hand Wave and Rebar to break apart for a mod like this
Couldn't bring myself to do that to some new ones :ahhh :ahhh :ahhh :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
I would only be worried if it was a knife blade :o and then it isn't an extremely big deal since the other handle should prevent it from closing on your fingers 