What did you use your Leatherman for today?
-
First use of rebar with bit extension today, to change the batteries in my wireless mouse at work. I don't like the retention of the bit adapter on the philips driver of the rebar. I'm thinking a mod in the future and add the bit exchanger from a wave/surge.
I wonder if Loki has any in stock


-
[quote author=Gohard link=topic=37474.msg1324938#msg1324938 date=1470998870]
Cutting an orange for lunch.Is that a huge brake disc you're using as a table there?
Yes. It is.
It's looking a bit rough, it could do with a skim.
Or you could see if you can dress the surface with your wave file

Zoom in and look at the cracks. Need some body filler.
[/quote]:o That thing is bigger than any disc brake I have ever messed with :ahhh
-
@Kevin Davey said:
First use of rebar with bit extension today, to change the batteries in my wireless mouse at work. I don't like the retention of the bit adapter on the philips driver of the rebar. I'm thinking a mod in the future and add the bit exchanger from a wave/surge.I wonder if Loki has any in stock


I have never had any problems with mine and I have used it for years now
A bit holder would be good for a lot of people though but I like the dedicated Phillips best
Loki usually has stuff like that in stock I would shoot him a OM if you really want one

-
[quote author=Gohard link=topic=37474.msg1324938#msg1324938 date=1470998870]
Cutting an orange for lunch.Is that a huge brake disc you're using as a table there?
Yes. It is.
It's looking a bit rough, it could do with a skim.
Or you could see if you can dress the surface with your wave file

Zoom in and look at the cracks. Need some body filler.
[/quote]I noticed them, but thought there's life in it yet :D
If there is anything like here, they run them till they fail. Which I find surprising considering they are hauling a couple of hundred tons of slag or pig iron around at a time. Needless to say they get right of way everywhere
-
First use of rebar with bit extension today, to change the batteries in my wireless mouse at work. I don't like the retention of the bit adapter on the philips driver of the rebar. I'm thinking a mod in the future and add the bit exchanger from a wave/surge.
I wonder if Loki has any in stock


I have never had any problems with mine and I have used it for years now
A bit holder would be good for a lot of people though but I like the dedicated Phillips best
Loki usually has stuff like that in stock I would shoot him a OM if you really want one

The adapter is one I bought for the Juice XE6 but I'm guessing they are the same ones for the rebar.
I've got the saw/file adapter off a surge coming from Loki to see if I can mod it to fit and lock in a rebar. If I can get it in I can bin the saw and make more room for other mods.
-
First use of rebar with bit extension today, to change the batteries in my wireless mouse at work. I don't like the retention of the bit adapter on the philips driver of the rebar. I'm thinking a mod in the future and add the bit exchanger from a wave/surge.
I wonder if Loki has any in stock


I have never had any problems with mine and I have used it for years now
A bit holder would be good for a lot of people though but I like the dedicated Phillips best
Loki usually has stuff like that in stock I would shoot him a OM if you really want one

The adapter is one I bought for the Juice XE6 but I'm guessing they are the same ones for the rebar.
I've got the saw/file adapter off a surge coming from Loki to see if I can mod it to fit and lock in a rebar. If I can get it in I can bin the saw and make more room for other mods.
Can't wait to see what you come up with
:D -
[quote author=Kevin Davey link=topic=37474.msg1326501#msg1326501 date=1471244363]
[quote author=Gohard link=topic=37474.msg1324938#msg1324938 date=1470998870]
Cutting an orange for lunch.Is that a huge brake disc you're using as a table there?
Yes. It is.
It's looking a bit rough, it could do with a skim.
Or you could see if you can dress the surface with your wave file

Zoom in and look at the cracks. Need some body filler.
[/quote]I noticed them, but thought there's life in it yet :D
If there is anything like here, they run them till they fail. Which I find surprising considering they are hauling a couple of hundred tons of slag or pig iron around at a time. Needless to say they get right of way everywhere
[/quote]
Spot on. This mine site I work for now is 90% Autonomous. In other words All their haul-trucks has got NO drivers. (290t or 320 short ton.)
Its very hard on the brakes. If there is a emergency or safety breach or any problem all trucks on site gets shut down by the main control point or the radars around the trucks. That is an immediate dead stop. The disks spin at plus minus 24000 rpm. Not good for disk and pad to stop that quick.
We do brakes every day. Did I mention that we do brakes everyday?[emoji848][emoji848][emoji848][emoji848]
Yes that disk is still new. Will post a picture of a not so new one later if you guys want to see "hairline cracks". And lots of them. We change them normally when it gets too thin or a slit from top to bottom. -
[quote author=Kevin Davey link=topic=37474.msg1326501#msg1326501 date=1471244363]
[quote author=Gohard link=topic=37474.msg1324938#msg1324938 date=1470998870]
Cutting an orange for lunch.Is that a huge brake disc you're using as a table there?
Yes. It is.
It's looking a bit rough, it could do with a skim.
Or you could see if you can dress the surface with your wave file

Zoom in and look at the cracks. Need some body filler.
[/quote]:o That thing is bigger than any disc brake I have ever messed with :ahhh
[/quote]
You would not want to use this one as a doorstop [emoji1]
Yes it's quite big. And bloody heavy. -
New page banana man dance

-
Our seedless eating grapes are now ripe so I used my poor abused Juice to cut some for eating:

The scissors are like a razor so cutting these from the vine is very easy. A note aside, the grapes are about 2 weeks early this year.
John.
-
Open wrappings, bags, cardboard and gifts...

kiddo's birthday
-
my youngest got through the fence (again), so used my KSJ to cut some rusty barbed wire to rescue him, and again to cut the new wire to repair the damage so he can't go exploring again. The juice does pretty good with lighter wires.
-
A few tools were out to play today.
Surge pliers to shorten the chain on a geocaching travel bug dog tag.
Micra scissors to cut bubble wrap and packing tape.
Rebar saw to trim a dead branch off a tree that was hanging down over the entrance path to the place I walked my Yorkie.
-
@Kevin Davey said:
A few tools were out to play today.Surge pliers to shorten the chain on a geocaching travel bug dog tag.
Micra scissors to cut bubble wrap and packing tape.
Rebar saw to trim a dead branch off a tree that was hanging down over the entrance path to the place I walked my Yorkie.
You're a busy man!!
-
@jcs0001 said:
Our seedless eating grapes are now ripe so I used my poor abused Juice to cut some for eating:
The scissors are like a razor so cutting these from the vine is very easy. A note aside, the grapes are about 2 weeks early this year.
John.
The weather was not as kind on my grapes but I did still get several
Yours look like they did very well

Great uses guys

-
Used the knifeless rebar (with a pioneer for the knife part) to fit a new plug onto our office henry the hoover.
The one fitted was damaged somehow

so I replaced it with a new one so I could vacuum my office floor now the cleaners don't do it (and seeing as made the mess)
As a side note, 800 hermesetas sweetners certainly spread out well when knocked over

-
Used my charge to crack open stubborn pistachio nuts.
Sent from my SAMSUNG-SM-N920A using Tapatalk
-
@leathermon said:
Used my charge to crack open stubborn pistachio nuts.Sent from my SAMSUNG-SM-N920A using Tapatalk
Glad to know we are winning the battle against those pesky nuts :D
They are rather stubborn even when partially opened :ahhh :ahhh :ahhh

-
@Kevin Davey said:
Used the knifeless rebar (with a pioneer for the knife part) to fit a new plug onto our office henry the hoover.The one fitted was damaged somehow

so I replaced it with a new one so I could vacuum my office floor now the cleaners don't do it (and seeing as made the mess)
As a side note, 800 hermesetas sweetners certainly spread out well when knocked over

Who broke the plug Kevin
:D Good on you for taking the initiative and fixing it though 
-
@Kevin Davey said:
Used the knifeless rebar (with a pioneer for the knife part) to fit a new plug onto our office henry the hoover.The one fitted was damaged somehow

so I replaced it with a new one so I could vacuum my office floor now the cleaners don't do it (and seeing as made the mess)
As a side note, 800 hermesetas sweetners certainly spread out well when knocked over

You've been setup!!!!!
Hoover plug broken and sweetener dumped??? [emoji848][emoji848]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login