And so it begins.... (My adventures into Alox!)
-
What are your current options for liners, Syph?
-
@Toolslinger said:
What are your current options for liners, Syph?Stock nickel silver and brass are all i have right now.
-
@Toolslinger said:
Is it possible to put the Electrician's blade where the Awl is (opposite the main blade) on a 93mm?Here's my EDC & favourite ever SAK which was made by Syph007
An Alox Explorer with electricians blade.

-
Are Ti scales ever sold separately? Would consider for an existing farmer mod..

-
-
Is it possible to put the Electrician's blade where the Awl is (opposite the main blade) on a 93mm?
Here's my EDC & favourite ever SAK which was made by Syph007
An Alox Explorer with electricians blade.Very nice Dave

-
@s1xty7 said:
Bob, I love that you post here and interact with everybody so much. It's part of what makes your knives so amazing. We get to watch the decision process, the trial and error, the mastery of skill. And at the end, we get to see it all come together into something gorgeous and functional. It makes us feel like conspirators in the creation of something great. Like DaVinci asking the people at the local tavern for input on the Mona Lisa. That bit of personal investment we feel (at least I feel) at being part of the process makes the end result much more personal. Thank you for sharing your process with us.Very nicely put 67.
I could not agree more.
I am amazed our good buddy is so open with his trials and errors -
Not that there is anything to hide - But sharing failures (or let's say unsuccessful attempts ;) ) and speSmurfpillst knowledge - as well as successes is a very rare and commendable characteristic.And of course seeing things evolve makes them that much more special for us the observers, or even co-conspirators ;) - as you put it :) ........ And also helps us learn stuff too - if we ever get into any of these activities.
The other thing that I love is the constant changes of direction and new creations - Not much over a year ago all we were just looking at in this thread were various scissor and layer additions to a 93mm alox knife - Now look where we are ! - :o wooo hooo 8)
Thanks Syph - We are so priviliged to have you in our forum !!

And thanks for sharing!! -
Bob, I love that you post here and interact with everybody so much. It's part of what makes your knives so amazing. We get to watch the decision process, the trial and error, the mastery of skill. And at the end, we get to see it all come together into something gorgeous and functional. It makes us feel like conspirators in the creation of something great. Like DaVinci asking the people at the local tavern for input on the Mona Lisa. That bit of personal investment we feel (at least I feel) at being part of the process makes the end result much more personal. Thank you for sharing your process with us.
Very nicely put 67.
I could not agree more.
I am amazed our good buddy is so open with his trials and errors -
Not that there is anything to hide - But sharing failures (or let's say unsuccessful attempts ;) ) and speSmurfpillst knowledge - as well as successes is a very rare and commendable characteristic.And of course seeing things evolve makes them that much more special for us the observers, or even co-conspirators ;) - as you put it :) ........ And also helps us learn stuff too - if we ever get into any of these activities.
The other thing that I love is the constant changes of direction and new creations - Not much over a year ago all we were just looking at in this thread were various scissor and layer additions to a 93mm alox knife - Now look where we are ! - :o wooo hooo 8)
Thanks Syph - We are so priviliged to have you in our forum !!

And thanks for sharing!!Couldn't agree more

-
Very nice Dave

Thanks Poncho

I can honestly say that it not only gets carried every day it also gets used at least once a day.That is awesome to hear it gets used so much
I can see what as it is a very good configuration

-
Bob, I love that you post here and interact with everybody so much. It's part of what makes your knives so amazing. We get to watch the decision process, the trial and error, the mastery of skill. And at the end, we get to see it all come together into something gorgeous and functional. It makes us feel like conspirators in the creation of something great. Like DaVinci asking the people at the local tavern for input on the Mona Lisa. That bit of personal investment we feel (at least I feel) at being part of the process makes the end result much more personal. Thank you for sharing your process with us.
Very nicely put 67.
I could not agree more.
I am amazed our good buddy is so open with his trials and errors -
Not that there is anything to hide - But sharing failures (or let's say unsuccessful attempts ;) ) and speSmurfpillst knowledge - as well as successes is a very rare and commendable characteristic.And of course seeing things evolve makes them that much more special for us the observers, or even co-conspirators ;) - as you put it :) ........ And also helps us learn stuff too - if we ever get into any of these activities.
The other thing that I love is the constant changes of direction and new creations - Not much over a year ago all we were just looking at in this thread were various scissor and layer additions to a 93mm alox knife - Now look where we are ! - :o wooo hooo 8)
Thanks Syph - We are so priviliged to have you in our forum !!

And thanks for sharing!!Couldn't agree more

+1 I love to see things as they progress

-
Thanks all!
Ya its funny I was excited to modify aluminum SAKs in the beginning and now I pretty much only do Ti... which is way more durable. :D
Here is today's work. Compact deluxe tinker.






-
The finish on those scales is amazing, particularly with the inlaid copper cross. Lovely!
-
I could look at pics all day like that

Very nice

-
@Lardlad said:
The finish on those scales is amazing, particularly with the inlaid copper cross. Lovely!Its funny but when I was originally asking around for quotes on having scales machined like this I got comments like wow that texture will eat up 9 minutes of machine time for each part.... it will be pricey.
Now that I have a CNC machine Im like... its ONLY 9 minutes per side! Nice! :D
-
The finish on those scales is amazing, particularly with the inlaid copper cross. Lovely!
Its funny but when I was originally asking around for quotes on having scales machined like this I got comments like wow that texture will eat up 9 minutes of machine time for each part.... it will be pricey.
Now that I have a CNC machine Im like... its ONLY 9 minutes per side! Nice! :D
Haha. Sweet!

-
Absolutely gorgeous. Now I'm waiting for 84 mm Ti scale turn , patiently.
Sent from my E6653 using Tapatalk
-
This week seems to be compact deluxe tinker week. Here's another but smooth scale this time.



-
Sweet
Sent from my XT1563 using Tapatalk
-
Lots of good work here Syph

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login