GoSun
-
Had a slight delay with our internet service, then later some stray dragon came and ate all the drumsticks - got some shots off first. :D
Slightly hazy with the forest fire smoke, some light clouds today.

Cooked 50 minutes this time, was what I had the watch timer set for beef the other day.

Thermometer check, first handle end then middle.

Inside, tray is out, chicken been setting maybe 10 minutes. Thermometer check again.

Then the dragon came by and devoured all the meat, then consumed the chicken juices straight from the tray.

-
SOLAR30 gets you a GoSun Sport at $249. FreeBagAugust to get Carry Bag at no charge, although expires the end of the month.
If money wasn't that big of an issue I'd order another GoSun Sport. One to cook the meats in, the other for the veggies.
Their Grill is the monster that could do it all, but that's $599 minus the SOLAR30 discount. 2nd batch is on pre-order and expected to be fulfilled this Fall.
-
I'd love to give this one a shot, but the price still seems a bit hefty. I'd like to give it a shot in different weather types and see how it really works.
Def
-
Chicken Breast, Ms Dash Lemon Peppered, Basil, Black Pepper. Added fresh Zucchini, Tomato, Pepperoncini. 50 minutes, then opened handle on end for another a few more minutes to dry out the meat some. Brought inside to let simmer inside.
Want a close-up? :D



-
Too many vegetables.... :P
Def
-
Silicone ware came in today from Amazon. Thought the orange baking mat was going to be a more colorful color of orange. Ahh well.
The dinky muffin pans are revered on the GoSun Community Kitchen page so I might give them a try or two at some point. Am more interested in the cutting of the baking mat to fit the tray. This will facilitate cooking without the need for oil or grease. This is food grade, BPA free, and what not. Not going to get the liner cut & trimmed tonight, too tired if I want to do a good job.

-
This thread is still really interesting. Living at approx 63° north in coastal climate (read: cloudy and rain is the norm) I'm not in the market myself, but good to see how the technology really works.

-
@Steinar said:
This thread is still really interesting. Living at approx 63° north in coastal climate (read: cloudy and rain is the norm) I'm not in the market myself, but good to see how the technology really works.
I'm n very interested to see how well it might work in more northerly latitudes. Obviously you can't expect much for four months of the year in the Arctic Circle but I am curious to see how well it would do in a Canadian winter.
Def
-
@Grant Lamontagne said:
This thread is still really interesting. Living at approx 63° north in coastal climate (read: cloudy and rain is the norm) I'm not in the market myself, but good to see how the technology really works.

I'm n very interested to see how well it might work in more northerly latitudes. Obviously you can't expect much for four months of the year in the Arctic Circle but I am curious to see how well it would do in a Canadian winter.
Def
That might have to require a serious employment change, a female companion who's wealthy enough, and something to entice me to relocate to test one out. Or... you could offer up a trade with a Canadian GoSun Distributor. Winters can be long. :D
-
Cut a silicone mat to fit inside the GoSun Sport tray. This facilitates cooking without the need for oils or grease, and makes it easier to clean up afterwards. That is the theory anyhow, and seems widely used at the GoSun Community Kitchen.
Had cut the silicone mat 4 inches wide, then trimmed the edges.

Next measured the silicone mat, did the cuts, washed it, then put inside the cooking tray.


So, to perfect the next liner here's some tips:
• Don't get the orange mat, it looks like a long piece of cheese in the tray
• Cut 3.75 inches wide if you want a flush to the tray edge mat
• Cut 4.00 inches wide if you want a 1/8 inch overlap - does not alter the effects of the cooking
• Cut the tabs with a small V cut if you want a better fit
• Wash the mat off afterwards to remove any coating and pen marksLay the trimmed silicone may lengthwise, push in the ends first, then fold the tabs inwards of the tray. You can still use cooking spray, oil, grease, butter, lard if you want.
-
Well, a use bug discovered me. First was the rotating mount that has a bit too much slack or is poorly designed, which allows the handle end of the solar cooker to droop down. When pulling the tray out food juices can drip down on the reflector - which I always wiped up quickly.
Was giving the GoSun Sport a clean over before storing it in the bag I recently purchased, and noticed this odd markings... scale perhaps?? Bad aluminum polishing??
It started out like this originally, which this is happening on the far end's bottom reflector.

The middle looks a lot like this now... which has gotten worse over time. Now I've only purchased the GoSun Sport this last June, on the 17th of 2016. Supposed to have a warranty on it, so posted this on their facebook page and the GoSun Community Kitchen to get feedback.

Close-up on the middle spotted area

Another angle

-
Any experts on the forum that are good at this sort of thing and know how to remove this offending whateveritis and can offer advice on restoring the reflection that I'm losing out on?
The top side of the reflectors are fine, so am guessing this issue occurred from food drippings and heated reflectors.
-
Just read all 4 pages...this would work very well here in Texas. If i had one of these when i was in scouts...

-
Got OCD with a Dremel, a few polishing pads, MAAS polishing compount, a lot of rags, and think I went a bit over the top.
:ahhh 
I should of just left it alone, now have a mess and I smell like MAAS and I just took a shower before all of this.
-
Which this shouldn't affect the light reflection abilities. It just doesn't look as sexy. If it does affect cooking, I'm going to be pounding on the door of their business come next week.
-
It is obvious I got a sub-par reflector in that the clear coat was so inferior that normal food juices had eaten through to the aluminum underneath. Somehow I'd like to remove that crusty, bubbled area an get a smooth polished spot, then find some sort of sealant spray to put over the top to protect it.
The areas that i polished still look reflective but the stain or crust looks bad. Not expecting this to hold back the effectiveness of the solar oven any. Thing is I bought this on June 17th and it's already got an issue. GoSun could be kind enough to replace the reflector panel(s) and i can send what i have back but am not going to hold my breath any. Little do they know how popular this site is. >:D Especially with search engines.

More views of the scarred clear coating. Guess I'm the first to have reported this issue. I haven't the foggiest idea what caused this cause I always wipe the reflectors off, keeps bugs & critters away, and keeps my reflectors shiny - like my multitools.


Put some MAAS Metal Polish on the two locations. You can see the evident area that is affected once the vacuum tube module was removed.


This is about as shiny as I was able to get it this evening using a Dremel tool, MAAZ, and Dremel polishing compound. Tore through 3 polishing felt pads and still wasn't able to get rid of that crusted area.

But this still has reflectivity on it, minus the crusted outer ring.


I are a noob when it comes to polishing though. And what to use as a sealant (clear cote) after it's kind of been repaired? Will the sealant smooth over the crusted areas ya think? Suggestions, comment, poking fun at?
-
I wonder of this is the result of heavy use? Most camp stoves and items are intended only for occasional use.
Def
-
Many others use there GoSun Sports every day, and one woman in Montana uses it several times a day.
If there is a flaw/bug/issue in something it usually ends up finding me. Swear it's a curse.
Even when I beta tested software for prevalent companies I had this motto: If there is a bug it will find me. And I found some notorious, hard-to-find bugs in software. One that affected the floppy disk controller chip was tossed out as not reproducible. After about 8 months to a year in release Symantec got back to me and apologized - the bug was notoriously duplicated by end users. Symantec replaced the motherboard on my PC, and gave me some gifts to help smooth things over.But, you know, I'd like flawless experiences just like the next person - I really do. The issue with the reflector was probably due to poor craftsman ship, and was probably made in China. The stability of the mount causes the vacuum tube to lean towards the handle end. That in turn leaks juices out onto which ever side the owner wants to use, and it leaks onto the bottom reflector. When carrying the GoSun Sport inside or to a shaded area the juices leak out due to the tray's design.
The tray has a center threaded screw attachment that one screws in a cleaning attachment. This helps remove back-on debris from inside the tube. Others have replaced this cleaning option with a sponge on a stick. So there's that center hole. It needs a plug for when not in use cause juice flows through that and to the bottom of the vacuum tube.
Also there are two holes at the very far end of the tray, just above the center mounting hole, that when carrying the unit to a more shaded area for unloading causes juices to flow past the end of the tray into the vacuum tube. Unsure why the developers put the holes in there, but it looks like no matter how hard one tries food juices will get onto the reflectors.Since I wiped the reflectors down when I noticed spillage, and not had any acidic issues from what I've cooked, why on Earth did whatever I cooked cause the clear coated surface to of scarred and was eaten through? A GoSun developer on the GoSun Community Kitchen, Matt Gillespie, claims to of never seen this issue before. So guess I stand alone on the issue ... for now. :-\
-
Today was the first time cooking with a silicone liner. The taste was a lot different without the Pam cooking spray. The liner does hold the juices in better, though I'm not sold on the idea yet.

Chicken did get cooked thoroughly
though it did taste different. Not bad different, more like there is something missing different. Used no cooking spray, no grease, no oil. Only the juices contained in the rice cups & the chicken itself.

Rice was <u>not</u> thoroughly cooked in an hour though. No big surprise there, was a test.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
