Which SAK is getting pocket time today?
-
The Ranger is shaping up to be my favorite SAK of all time :o
It has become one of mine as well....the perfect field pattern!
Good choice today!!!Nice 1
Is this basically the same as the Master Craftsman/Astronaut with a cork screw instead of the phillips?
Yes that is what it is
I just checked SAKwiki to make sure :D -
-
-
The Ranger is shaping up to be my favorite SAK of all time :o
It has become one of mine as well....the perfect field pattern!
Good choice today!!!Nice 1
Is this basically the same as the Master Craftsman/Astronaut with a cork screw instead of the phillips?
Yes that is what it is
I just checked SAKwiki to make sure :DYeah...I'm crazy for those as well...

-
Hear, hear......😛

-
[quote author=Poncho65 link=topic=42565.msg1328553#msg1328553 date=1471529105]
The Ranger is shaping up to be my favorite SAK of all time :oIt has become one of mine as well....the perfect field pattern!
Good choice today!!!Nice 1
Is this basically the same as the Master Craftsman/Astronaut with a cork screw instead of the phillips?
Yes that is what it is
I just checked SAKwiki to make sure :DYeah...I'm crazy for those as well...

[/quote]Well you might as well get us a pic of all of them now
I know it will be a good pic :ahhh :ahhh 
-

I see a couple of ya got the memo! :ahhh "Its Trail Guide Thursday" !!!!!! :DGREAT carries today , & awesome pics!

-
Between work e-mails and files, I was sitting here all day with Sheila Sexsmith cutting cord into lanyards for some ebay sales. Her scissors were in heavy use along with a Bic lighter I've had for about 20 years that still has about 25% fluid in it.
So at the end of the day I decided to give her a facelift. Just did 800grit/2000grit/polishing compound on the scales (I realize this is not enough intermediary grits for a real luster). The blade got a major redo. It looks basically regular, but the tip was bent and there were a lot of nicks in the edge. I had to remove a lot of material but luckily didn't accidentally lay it on the stone and it still looks basically stock, it's a bit smaller. Polished some "stains" off the blade as well but didn't get everything out since I want to have some blade left. It's one of the older, thicker blades, with no raised area in the outside liner. I oiled'er up and wiped'er down.
I miss an awl on this knife, but appreciate the hand feel for using the blade and scissors. Top 3 EDCs easily. Especially with a usable edge on it.

-
@JamesJ said:
Between work e-mails and files, I was sitting here all day with Sheila Sexsmith cutting cord into lanyards for some ebay sales. Her scissors were in heavy use along with a Bic lighter I've had for about 20 years that still has about 25% fluid in it.So at the end of the day I decided to give her a facelift. Just did 800grit/2000grit/polishing compound on the scales (I realize this is not enough intermediary grits for a real luster). The blade got a major redo. It looks basically regular, but the tip was bent and there were a lot of nicks in the edge. I had to remove a lot of material but luckily didn't accidentally lay it on the stone and it still looks basically stock, it's a bit smaller. Polished some "stains" off the blade as well but didn't get everything out since I want to have some blade left. It's one of the older, thicker blades, with no raised area in the outside liner. I oiled'er up and wiped'er down.
I miss an awl on this knife, but appreciate the hand feel for using the blade and scissors. Top 3 EDCs easily. Especially with a usable edge on it.
Someone told me, to get rid of unwanted inlays and light scratches, try wet sanding with 2000 grit then polishing cream afterwards...
Sent from my iPhone using Tapatalk
-
@JamesJ said:
Between work e-mails and files, I was sitting here all day with Sheila Sexsmith cutting cord into lanyards for some ebay sales. Her scissors were in heavy use along with a Bic lighter I've had for about 20 years that still has about 25% fluid in it.So at the end of the day I decided to give her a facelift. Just did 800grit/2000grit/polishing compound on the scales (I realize this is not enough intermediary grits for a real luster). The blade got a major redo. It looks basically regular, but the tip was bent and there were a lot of nicks in the edge. I had to remove a lot of material but luckily didn't accidentally lay it on the stone and it still looks basically stock, it's a bit smaller. Polished some "stains" off the blade as well but didn't get everything out since I want to have some blade left. It's one of the older, thicker blades, with no raised area in the outside liner. I oiled'er up and wiped'er down.
I miss an awl on this knife, but appreciate the hand feel for using the blade and scissors. Top 3 EDCs easily. Especially with a usable edge on it.
Very nice James!!!

-
Most awesome P!!!

-
PX-D day 109. Time to touch up the blade again. I used the Spirit a lot yesterday and pocketed it briefly, but missed the alox checkering, so that was short lived. My birthday came and went without me digging out my birth year Soldier too, so much for that tradition. The damascus steel main blade might be softer than standard Vic stainless, I seem to be finding this knife needing sharpening more often than others I have carried. It might be that I'm using it differently also, as not having the small utility blade puts more dependency on the main one, even though I'm using the awl for a lot of the small blade duties now. The alox finish is holding up well, still no obvious wear.


-
@twiliter said:
PX-D day 109. Time to touch up the blade again. I used the Spirit a lot yesterday and pocketed it briefly, but missed the alox checkering, so that was short lived. My birthday came and went without me digging out my birth year Soldier too, so much for that tradition. The damascus steel main blade might be softer than standard Vic stainless, I seem to be finding this knife needing sharpening more often than others I have carried. It might be that I'm using it differently also, as not having the small utility blade puts more dependency on the main one, even though I'm using the awl for a lot of the small blade duties now. The alox finish is holding up well, still no obvious wear.
Looks great and Happy Birthday!!!!!!!!!!!!!!!!!

These today:
Vic Sportsman & a Winchester Banana Trapper

-
Camo Hunter and Money clip today. The Money clip is my most trusted SAK. It holds my beer money.


-
My favorite Farmer

-
PX-D day 109. Time to touch up the blade again. I used the Spirit a lot yesterday and pocketed it briefly, but missed the alox checkering, so that was short lived. My birthday came and went without me digging out my birth year Soldier too, so much for that tradition. The damascus steel main blade might be softer than standard Vic stainless, I seem to be finding this knife needing sharpening more often than others I have carried. It might be that I'm using it differently also, as not having the small utility blade puts more dependency on the main one, even though I'm using the awl for a lot of the small blade duties now. The alox finish is holding up well, still no obvious wear.

Looks great and Happy Birthday!!!!!!!!!!!!!!!!!

These today:
Vic Sportsman & a Winchester Banana Trapper

Nice SG

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



