When you close a blade....
-
Nice thread :D
I also like to let them snap

-


I actually think in the Vic picture, the blade is riding lower down than it should, as the tension in the spring bar isn't correct (as the phillips is slightly misplaced).
-
P.S.: this is a very nice article regarding the SAK springs.
http://www.sakhome.com/305357085
This <u>whole </u>site (www.sakhome.com) is very interesting, it has a ton of interesting information for the SAK lovers. Someone has put a lot of effort into that site. Congrats to the site owner

-
Although only the kick touches the spring in the resting position, you can press the back of the blade down further against the resistance of the spring. On some knives the clearance between blade and spring is so small that the momentum of the blade snapping closed can take it far enough past the normal closed position to strike the spring. Laguioles and similar French knives are apparently prone to this. I have a Spanish-made Nieto knife that does it every time too. On SAKs there is a pretty good amount of resistance when you press down on the back of a closed blade, and snapping them closed doesn't seem to be a problem... good engineering. In any case the blade tip hits the liner before the edge contacts the spring, on 91mm and 93mm at least.
-
Thank you for all those very interesting replies I do appreciate.
It's actually a question that I've had for a long, long time. Love the patent picture !
Now I can snap away without stress ;) -
@Gee.B said:
Thank you for all those very interesting replies I do appreciate.
It's actually a question that I've had for a long, long time. Love the patent picture !
Now I can snap away without stress ;)Snap away, and if you want to make sure, check the edge periodically under a bright light. If you keep seeing a glint in the same place, even after you sharpen a few times, then you know to be more careful. I have a Buck knife I can't let snap, it didn't take too long to notice.
-
@Subterranean said:
P.S.: this is a very nice article regarding the SAK springs.http://www.sakhome.com/305357085
This <u>whole </u>site (www.sakhome.com) is very interesting, it has a ton of interesting information for the SAK lovers. Someone has put a lot of effort into that site. Congrats to the site owner

That's Trond's aka North Man's page, and as you might have guessed, he's a long time member here and one of if not the most knowledgeable person on Wengers we have. I learned a lot from him.

Hope he visits us back soon.

-
Call me a snapper head. I almost always let the blade snap in on its own. Usually I close them one handed. I do this on all my SAKs, just habit it seems.i have never seen any evidence damage to the blade edge from doing this.
-
I close to a sensible distance, then let go, for a quieter snap. If others are sleeping sometimes I do a ninja close. I'm more careful with full length tools, the phillips, openers, etc generally I let those fly closed.
-
When at work, I tend to just close the blade one handed against my leg. The only problem I've ever had with that is catching the bail on a Wenger SI with the blade.
-
Yes, every time!
The first thing you learn in marketing is "You sell the sizzle, not the steak". To me, that sound of the blade snapping closed is the "sizzle"; the surprise and delight I get from that snap every time really makes me love SAKs.
It's the sound of precision engineering.
It's the sound of a well made object.
It's the sound of a finished job.
It's the sound of trust in your tools.
It's the sound of being Johnny-on-the-spot.
It's the sound of form meeting function.
It's the sound of beauty and engineering that you can carry in your pocket.
It's the million dollar sound.
-
The first thing you learn in marketing is "You sell the sizzle, not the steak". To me, that sound of the blade snapping closed is the "sizzle"; the surprise and delight I get from that snap every time really makes me love SAKs.
It's the sound of precision engineering.
It's the sound of a well made object.
It's the sound of a finished job.
It's the sound of trust in your tools.
It's the sound of being Johnny-on-the-spot.
It's the sound of form meeting function.
It's the sound of beauty and engineering that you can carry in your pocket.
It's the million dollar sound.
Exactly! Very nice description!

-
It's better than bubble wrap. :-)
-
The first thing you learn in marketing is "You sell the sizzle, not the steak". To me, that sound of the blade snapping closed is the "sizzle"; the surprise and delight I get from that snap every time really makes me love SAKs.
It's the sound of precision engineering.
It's the sound of a well made object.
It's the sound of a finished job.
It's the sound of trust in your tools.
It's the sound of being Johnny-on-the-spot.
It's the sound of form meeting function.
It's the sound of beauty and engineering that you can carry in your pocket.
It's the million dollar sound.
This !! I let mine snap every time. It's part of the Swiss Army knife allure for me. Gives me this well engineered precise feeling that I like.
Sent from my iPhone using Tapatalk
-
I try to let the blade snap for the fun of it, but most of the times I control the blade all the way down.
I read somewhere that it's bad for the back spring to let your blade snap shut.
And it's Cars fault with his stories of Mr Van on the traditional section of BF. "Don't fight your blade" and not to let it snap shut :ahhh -
Well, should a back spring ever snap just send the knife to the Victorinox warranty spa and your grandson maybe has to do it again. And I doubt snapping alone damages the spring, more likely it furthers damage taken in some other incident. anyway more recent springs should be more resistants than older ones.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
