What Did You Use Your Multitool For Today?
-
One of my alpacas got his head stuck in the fence so I had to cut the wire with my wave. He was fine and didn't lose hardly any hair. I guess I'll be replacing the woven wire with some horse fence sometime soon.
-
To pose in a tree for a piccy for the juice cover GAW

-
So at the fort we need a new sponge covering for the sponge we use for firing (the sponge is a sheep skin covered stick that you use to send down the barrel of the gun before and after firing to extinguish any embers before loading). When we took the old cover off we found out that some used steel nail not the brass tacks you are supposed to use (steel can cause sparks which is the opposite of what the sponge is suppose to do
). So I took on the project of trying to remove the nails that put up a fight coming out.So yesterday I tried many things such as heating up a spike to burn the the nails out, but I really thought a 93mm inline awl was the right tool for the job. Normally this would not be a problem as I carry my Pioneer X so I run over to the locker room and find that the day before I had forgotten the X in my waterproof box after kayaking. So today I made sure to bring her out and with the awl and a cold chisel I was able to shorten the nails and then embed in the wood where they can't create sparks.
So the Swiss Army has saved the Union Army :D

-
Had a few parcels to send today. The little blade on the squirt ps4 was very handy for trimming the tape and labels. A very handy little tool
-
Used my ST 300 plier head to break up larger clumps of ice to fit in my 34oz tumbler.

Sent from my iPhone using Tapatalk
-
Friend of mine is residing his house this week. Spent the day helping him get ready. In the party, there was my LM Rebar, a second Rebar, an ST300 and a Wave, along with a bunch of SAKs, mostly Climbers and Supertinkers. In attendence were also a number of small multipurpose bars including my Pocketwrench II.
Among other tasks:
Removing lights and door bells.
Repairing improperly run wiring.
Fixing the compressor that will be powering the nailgun.
Cutting tyvek and that press on tar tape.
Cutting bands from around bundles of shingles.
Removing extranious phone line runs.
Removing prior owner's satellite dish and wiring.
Dismounting a door.
Filing through a pair of bolts that couldn't be reached with the angle grinder becuase they were behind the propane tank and the heads had been broken off while removing the old propane tank.And honestly, while the crowbar to rip the old shingles off was faster, when you factor in clean up time my habit of just grabbing the shingles and pulling them off the wall in one peice was probably more efficent. I went hand to hand with a house, and won. :D
-
Farmer saw to take down some overgrown limbs
-
FlipGrip and Schrade Vise Grips to do a little mod on the A100

Replaced the main blade (cheap fake Chinese one that had been put into the tool) with a small flathead



Tool was traded to jcs0001 in an excellent experience!

-
I used my MP600 to adjust the brakes on my bike today.

-
I'm glad Dad wasn't around to see me do it, but....
I used my LM Wave to undo a nut.
I was in a hurry, I was in a bad mood, and my 8mm ring spanner was no where to be found, so...old Wavey and a firm grip - and....off came the rusty nyloc.
(in my defense, the part wasn't going to be refitted, and didn't need to be kept in good condition, but still, I was raised better than that :-[ )
-
Not today, but during the week I had to use my SAK classic's blade to take out a naughty metal stapler piece (whatever they're called) that had gotten stuck. Then yesterday I used my PS4's pliers to pull a damn zipper that had gotten stuck.
Small MTs rule

-
I used my MP600 DET to trim some guitar strings as I was restringing my electric guitar for the first time since 10 years...
Also found out that I can't play jack smurf anymore

-
Micra scissors to open the packaging on my new watch

-
What did I intend to use it for? Cut some rubber band to finish the slingshot I started the other day
Whad did I actually use it for? Cut myself badly in the thumb :(

My fault, I learned today that rubbery, elastic things and blades are an accident waiting to happen!


Nothing a bit of superglue won't heal, though

-
Ouch ! Not deep enough for stitches I hope
-
-
And as incredibly ridiculous as it sounds, I used it to slash open my skin again.
My new PP cut me badly,


That's what I call a "wicked sharp" blade, I didn't even notice at first.

-
:ahhh :ahhh :ahhh Be careful Peacent you gonna bleed to death cutting yourself like that all the time :D
-
I think you have now overtaken NNR in the self injury dept. :ahhh
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




