Been doing some work in the Wiki
-
As for the missing 84mm pages, a lot of the 91mm models we have today once came in 84mm format also. We just need pics of them and the manpower to make all the pages.
Same problem is what hindered me in making the Delemont pages. I created the layer pages, the module for them on the right of the screen and some other stuff, but the actual model pages will be a big project. I thought at first about using the scans from the catalogs for the pics, but as we all know, they aren't exactly always correct, and some of the mockups from the first catalogs were ... flawed ::)
So if someone has a Delemont and is willing to make a pic for it, go right ahead. We'll fix it if needed be but if you follow a code template from an older page, and just change out the text, there shouldn't be any big problems.
-
One thing that still needs to be done is to check ALL the pages for broken SOSAK links and link them from broken SOSAKonline to working swissarmyknights.com links. The problem being you have to find them in swissarmyknights archives first.

-
Nice work guys

-
@enki_ck said:
Fixed the Pioneer X page for you.
http://www.sakwiki.com/tiki-index.php?page=Pioneer+X
You made it a bit too complicated with the code. No need for most of the extras. Text and a img code now and then to make it look better.
.......
Top right corner of the Edit page, there is a Pencil icon, and when you hover above it, it says Switch Editor (wiki or WYSIWYG) .....
.......
Hope this helps.
Thanks enki ........... The Master :D

To be honest I am not sure how I created the page - as you can see from the many versions/attempts :o
I tried to use the template - I somehow ended up in the wysiwyg editor - I did a cut and paste from the Pioneer page - and lots of stuff got added in automatically - I think- Will deffo need some coaching if I am to help with the Delemonts !!

I searched high and low for that pencil icon - As I read about it in the help text - And I still cannot see it
Top right I seem to have the help button and a full screen toggle - Guess I am looking in the wrong place.
Anyway it's much better now and the reglar editor is back - And you included the Damascus piccie - Fantastic.
Thanks for all your help

- Will deffo need some coaching if I am to help with the Delemonts !!
-
Top row, second on the right in the wiki editor and third from the right on the wysiwyg editor.
-
Red arrow marks the spot
WIKI editor:

WYSIWYG editor:

-
You know, we need editors for the Multitool Encyclopedia too

-
Don't know if this is the right thread to share pics, but just in case.
The horn scaled 84mm is my friend's knife I was talking about earlier. It has the same tool configuration as the 91mm Grand Prix.
Would love to know more about this if anyone has info. Thanks.


Sent from my iPhone using Tapatalk
-
Very nice work guys
I use the SAKwiki quite often and it is a great resource for me 
@sLaughterMed said:
You know, we need editors for the Multitool Encyclopedia too
This is very true and would love if we could get the MT Wiki updated as good as the SAKwiki
as I have used it several times as well but no to the extent the SAKwiki is used because the SAKwiki is more complete 
-
You know, we need editors for the Multitool Encyclopedia too

This is very true and would love if we could get the MT Wiki updated as good as the SAKwiki
as I have used it several times as well but no to the extent the SAKwiki is used because the SAKwiki is more complete 
Get your own thread in the General board!


Sheesh, those Plier People ::) Always wanna be cool like the Swiss Mob.

Seriously though, the software the wikis use is the same, so if one learns how to do edits and create pages on one, they can transfer the knowledge to the other wiki.
-
@jaya_man said:
Don't know if this is the right thread to share pics, but just in case.The horn scaled 84mm is my friend's knife I was talking about earlier. It has the same tool configuration as the 91mm Grand Prix.
Would love to know more about this if anyone has info. Thanks.
Maybe better for a separate thread, but jazzbass calls the regular cellidor scaled one 135kmaU or the Small Grand Prix, pics are broken though.
/topic/21659 -
Don't know if this is the right thread to share pics, but just in case.
The horn scaled 84mm is my friend's knife I was talking about earlier. It has the same tool configuration as the 91mm Grand Prix.
Would love to know more about this if anyone has info. Thanks.
Maybe better for a separate thread, but jazzbass calls the regular cellidor scaled one 135kmaU or the Small Grand Prix, pics are broken though.
/topic/21659Thanks for the info Enki... [emoji1317][emoji1317][emoji1317]
Sent from my iPhone using Tapatalk
-
Hi all
One of the reasons I signed up to MTO was to offer to do a bit of tidying on SAK Wiki, which I've found to be a fascinating read while thinking about what I want in my next SAK. As a part of that research I pulled down all of the Victorinox 84mm and 91mm knife pages, and found a few things that complicated my efforts to clearly understand which knifes had which tools that offered which functions. For example, the can opener tool seems to be described in all these ways:
-
Can Opener
-
Can Opener - Bottle Opener - Screwdriver - Wire Stripper
-
Can Opener - includes small screwdriver tip
-
Can Opener - includes small-slotted screwdriver that also works with Phillips drive
-
Can Opener includes small-slotted screw-driver that works with Phillips screws also
-
Can Opener - includes small-slotted screw-driver tip that works with Phillips also.
-
Can Opener - Screwdriver
-
Can Opener include Screwdriver tip
-
Can Opener w/small screw-driver
-
Can Opener with Screwdriver Tip
-
Can Opener with small screwdriver
-
Can Opener with small screwdriver 3 mm
-
Can Opener with small screwdriver tip
-
Can Opener/Screwdriver
-
Can Opener/Small Screwdriver Tip
-
Can Opener/small-slotted screw-driver that works with Phillips also
-
Can-Opener w/ screwdriver
What I thought might be nice is to tidy up all of the entries so that they and more consistent, and also use that new streamlined list to refresh SAK Selector with equivalent information. Using the knife-to-tool data that has been gather in the reverse direction could also build a tool-to-knife section on each tool page. Finally, the tables of which knife has which features on the Layer N pages could possibly be updated to show all tool combinations, or similar.
Thoughts and guidance welcome. I haven't register yet >:D.
-
-
A big THANKS to everyone working on cleaning up the Wiki!

-
@Little Tinker said:
Hi all
One of the reasons I signed up to MTO was to offer to do a bit of tidying on SAK Wiki, which I've found to be a fascinating read while thinking about what I want in my next SAK. As a part of that research I pulled down all of the Victorinox 84mm and 91mm knife pages, and found a few things that complicated my efforts to clearly understand which knifes had which tools that offered which functions. For example, the can opener tool seems to be described in all these ways:
.......... long inconsistent list !! ........ :o
What I thought might be nice is to tidy up all of the entries so that they and more consistent, and also use that new streamlined list to refresh SAK Selector with equivalent information. Using the knife-to-tool data that has been gather in the reverse direction could also build a tool-to-knife section on each tool page. Finally, the tables of which knife has which features on the Layer N pages could possibly be updated to show all tool combinations, or similar.
Thoughts and guidance welcome. I haven't register yet >:D.Hey Little Tinker (nice name BTW!!),
Welcome to the forum and thanks for the offer of help
That can opener list is amazing - And funny - I guess the result of multiple authors over a long time, and a tool with several functions- As you may know - for these items there is a hyperlink underneath and some display text which the author can edit
For those in the know, I guess it is pretty obvious what the tool is - But for someone unfamiliar - these sorts of inconsistencies are confusing - It sounds like a lot of work to clean up - Is there a clever automated way to do that? or is it just grunt.
(BTW you sound even more OCD than me!!)
The tool to knife and knife to tool links would be great too.
Detron on this forum created a spreadsheet like that and as you say there is the Selector..I am just a novice editor (as you can tell) - But maybe enki or one of the other Wiki-meisters will be along soon!!

@enki_ck said:
Red arrow marks the spot
WIKI editor:
.......
WYSIWYG editor:
.........Enki - Thanks for the piccies - I was going to ask for that
As I suspected - or hoped!! (I did not think I was that blind or dumb) - we must have different authorisations - As no little pencil for me :(Here is what my editor screen looks like..
- As you may know - for these items there is a hyperlink underneath and some display text which the author can edit
-
I'm here but I shoud be sleeping, it's past 2am here and I work in the morning.

The work threw the years was done by a few authors, and in spells of a few years, mostly not parallel with other authors. Red Ramage pioneered the whole thing and most of the original pages are his. Then came Stressmaster5000, then ICanFixThat and then I and basilio who did a lot for the Wenger pages. That's the ones who worked for longer periods of time, there are still many people who contributed to it, like Andy T. and many ones that were never even members of MTO.
That's why you notice as many different kinds if code as the software changed, some code no longer worked, new commands were added and everybody tried something new to battle the code. Even the code I did isn't consistent threw the years.

There is a batch edit option we did use prior to the call for help and new editors but it can't be used in all the cases. I'm not even sure where it is as those were always done by whoey. I broke the wiki once or twice so I'd rather not mess with that end of it.
I tried to fix part of it with the how to I posted some time ago to fix the main window on all the pages and make them uniform.
We could probably do a batch edit on the tools too as it only has to change out the letters after the ((tool|... to something we agree on. We just have to agree on some list and forward it to whoey.
One problem however that I see is that although most of the tool descriptions are for the same tool, just worded differently, there are still tool variations that are described in the text after the tool and that would get lost by such a batch edit. For instance the scissors on some Angler SAKs come to mind, those with the fishing led crimpers.
(Too much text for typing on the phone and in bed, sorry for the spelling)
I'll address the sakselektor question when I'm a bit more awake. ;)
-
Probably the reason for it. Yeah, I'm an admin there so have a few more permissions available. I'm not sure if anyone even uses the WYSIWYG editor. I'll talk to Whoey to have it disabled if he can, so as to only have the wiki editor available.
-
@Huntsman said:
Hey Little Tinker (nice name BTW!!),
Welcome to the forum and thanks for the offer of helpThanks for the welcome. The name has multiple meanings of course, happens to reflect parts of my character (as a friend noted "If it ain't broke we can still fix it" :D), and my erstwhile vintage Tinker Small is one of my favourite SAKs ;). My first planned mod is also Tinker related ;)...
@Huntsman said:
That can opener list is amazing - And funny - I guess the result of multiple authors over a long time, and a tool with several functions- As you may know - for these items there is a hyperlink underneath and some display text which the author can edit
For those in the know, I guess it is pretty obvious what the tool is - But for someone unfamiliar - these sorts of inconsistencies are confusing - It sounds like a lot of work to clean up - Is there a clever automated way to do that? or is it just grunt.
The tool to knife and knife to tool links would be great too.
Detron on this forum created a spreadsheet like that and as you say there is the Selector..
I am just a novice editor (as you can tell) - But maybe enki or one of the other Wiki-meisters will be along soon!!

I'm intending that a lot of the edits should be automated, otherwise my enthusiasm could be dented. I'm not expecting that to be too hard, but we'll see...
On reflection although those various rendition of the same information got a bit in the way of me digesting all the tool layer info into Excel (because I had to flatten them out) it won't be such a practical problem once I can see the raw Wiki source, so probably best to focus on new additions than tidying up perfectly usable current info. My current ideas are:
- Knife page (eg Tinker Small): Leave for now, except maybe rejig thinks like key-ring to be a consistent scale or layer tool. I need to be strong on this :P...
- Tool page (eg Phillips Screwdriver Back Tool: Provide link to knives that have the tool, with indication of how many layers that knife has to give you a sense of whether it's likely to be what you're after.
- Size / layer pages (eg Victorinox 91mm 3 layer): Expand table to have a column for each differentiating layer / back tool (probably not scale tools - too much noise)
And of course use similar info to refresh the Selector and give dynamic lookup / search as well as simple perusal of that static info.
You could be right :o...
- As you may know - for these items there is a hyperlink underneath and some display text which the author can edit
-
I registered on SAKWiki, so just need editing rights set up to start trialling some of the above.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login